How to Use a Dive Watch Bezel (Diving and Everyday Uses)

How to Use a Dive Watch Bezel (Diving and Everyday Uses)

A dive bezel is a rotating ring marked from 0 to 60 minutes. To time something, turn the bezel so its zero marker (usually a luminous triangle or dot) lines up with the minute hand. As time passes, the minute hand points to the number of minutes elapsed on the bezel. Dive bezels turn only counterclockwise, so a knock can only make it look as though more time has passed, never less. Divers use it to track time underwater, and everyone else can use it for parking, cooking, meetings and workouts.

The parts of a dive bezel

Part

What it is

Zero marker (pip or triangle)

The starting point, usually luminous so it's visible in the dark

Minute markings

Numbers or marks from 0 to 60, usually every 5 or 10 minutes

First 15 or 20 minutes

Often marked minute by minute, or colored, for closer reading

Ratchet

The mechanism under the bezel that makes it click and turn one way only

Insert

The colored ring with the markings, usually aluminum, ceramic or sapphire

How to time anything with a dive bezel

  1. Turn the bezel counterclockwise until the zero marker sits exactly over the minute hand.
  2. Start your activity.
  3. Read the elapsed time by looking at where the minute hand points on the bezel scale.

Example: you put pasta on at 6:12. Turn the bezel so the zero marker sits over the minute hand at 12 minutes past. When the minute hand reaches the 10 on the bezel, the pasta has been cooking for 10 minutes. No arithmetic, no phone.

For longer than 60 minutes, note how many times the minute hand passes the zero marker.

How to count down to a deadline

The bezel works just as well when you need to be somewhere, or back at the car, by a certain time. There are two ways.

Method 1: elapsed time. Set the zero marker over the minute hand. If you have 45 minutes on a parking meter, you're done when the minute hand reaches 45 on the bezel.

Method 2: mark the deadline. Turn the bezel so the zero marker points to the minute when time's up. If it's 2:20 and the meter expires at 3:05, put the zero marker at the 5-minute position. When the minute hand reaches the marker, time's up, and you can see at a glance how far away it is.

Method 2 is handy for meetings, trains and appointments, because the marker shows the target itself.

Why does a dive bezel only turn one way?

Underwater, a diver uses the bezel to track how long they've been down, which matters for air supply and decompression limits. If the bezel could turn both ways and got knocked forward, it would show less time than had actually passed, which could be dangerous. A unidirectional bezel turns only counterclockwise. If it's knocked, it can only show more elapsed time, so the error is always on the safe side.

How divers use the bezel

  1. Before descending, the diver sets the zero marker over the minute hand.
  2. During the dive, the minute hand shows elapsed dive time on the bezel.
  3. For safety stops or planned limits, the diver checks how many minutes have passed against their dive plan.

Today most divers rely on a dive computer, and the watch is a backup. A dive watch and bezel are not a substitute for proper training, a dive computer or dive tables. Follow your training and your dive plan.

60 clicks vs 120 clicks

Dive bezels click into place at each step.

Clicks

Each click equals

Notes

60

1 minute

Easy to set by feel; common on classic designs

120

30 seconds

Finer adjustment; common on many modern divers

90 and others

Varies

Less common

Neither is better; it's a matter of feel. A good bezel action is firm, crisp and free of wobble ("back-play"), and lines up precisely with the minute markers on the dial.

What ISO 6425 says about bezels

ISO 6425, the international standard for divers' watches, requires a time-preselection device, typically a unidirectional bezel, that's protected against accidental rotation or incorrect use. It must have minute markings covering 60 minutes and must be readable in the dark, which is why the zero marker is luminous. Our guide to ISO 6425 covers the full standard.

A short history of the dive bezel

Rotating bezels with a 60-minute scale existed before the dive watch, on a few chronographs from the late 1930s. The modern diver's bezel arrived in the early 1950s, when the first purpose-built dive watches appeared. Blancpain's Fifty Fathoms, introduced in 1953, is generally credited with the first unidirectional diver's bezel. Early versions of some other famous dive watches used bezels that turned both ways before one-way bezels became the norm.

Other bezels that look similar

Bezel

Scale

Use

Dive bezel

0 to 60 minutes, one way

Elapsed time

Countdown bezel

60 to 0 minutes

Counting down to a set time

12-hour bezel

1 to 12 hours

Tracking a second time zone or long intervals

24-hour (GMT) bezel

0 to 24 hours

A second or third time zone

Tachymeter bezel

Speed scale, fixed

Speed with a chronograph

Slide-rule bezel

Logarithmic scale

Calculations

Our guide to watch bezels explains each type.

Everyday uses for a dive bezel

  • Parking meters and short-term parking
  • Cooking: pasta, eggs, steeping tea, resting meat
  • Laundry and chores
  • Meetings and presentations: keep track of time without checking a phone
  • Workouts: rest periods, intervals, runs
  • Travel: boarding times, layovers, train departures
  • Kids' turns, games and screen time
  • Study sessions and focused work blocks

Caring for a dive bezel

  • Rinse after salt water, sand or chlorine. Turn the bezel while rinsing under fresh water to flush grit from the ratchet.
  • If it stiffens, rinse it rather than forcing it. A watchmaker can clean or service it if needed.
  • Protect the insert. Aluminum inserts can scratch and fade over time; ceramic resists scratches and fading but can crack if struck hard.
  • Don't pry it off yourself. Removing a bezel needs the right tools and can damage the click spring.

Turning the bezel doesn't affect water resistance; it sits outside the case's seals. Keep the crown screwed down and pushers untouched underwater unless the watch is designed for it.

How this applies to Vardesso

If a Vardesso model has a rotating dive bezel, its product page will say whether it's unidirectional, how many clicks it has, and what the insert is made of. A rotating bezel on its own doesn't make a watch a dive watch; water resistance, construction and legibility matter too, as our dive vs dive-style guide explains.

Questions and answers

How do you use a dive watch bezel?

Turn the bezel so the zero marker lines up with the minute hand, then read elapsed minutes where the minute hand points on the bezel.

Which way does a dive bezel turn?

Counterclockwise only, on a unidirectional dive bezel.

Why do dive bezels only turn one way?

So a knock can only show more elapsed time, never less, which keeps divers on the safe side.

What is the triangle on a dive bezel?

The zero marker, usually luminous, which you line up with the minute hand to start timing.

Can I use a dive bezel for a parking meter?

Yes. Set the zero marker over the minute hand, or put it at the minute the meter expires.

How do I count down with a dive bezel?

Turn the bezel so the zero marker points to the deadline minute; time's up when the minute hand reaches it.

What is the difference between 60-click and 120-click bezels?

A 60-click bezel moves one minute per click; a 120-click bezel moves 30 seconds per click.

Why are the first 15 minutes marked differently?

For closer reading of short intervals, which historically helped divers time the early part of a dive and decompression stops.

Can I turn the bezel underwater?

Yes, it doesn't affect water resistance, though it's easiest to set before you enter the water.

Does a rotating bezel make a watch a dive watch?

No. A true dive watch also needs suitable water resistance, construction and legibility, as set out in ISO 6425.

Do divers still use dive bezels?

Most rely on dive computers, but many keep a dive watch as a backup timer.

How do I clean a dive bezel?

Rinse it under fresh water while turning it to flush out salt and sand.

What should I do if my bezel is stiff?

Rinse it first. If it stays stiff, have a watchmaker clean or service it.

What is bezel back-play?

A slight wobble in the bezel when you push it. Less is better.

Keep reading

  • Dive watches
  • ISO 6425 dive watch standard
  • Watch bezels explained
  • Slide-rule bezels

Sources