Watches show seconds in three main ways. Small seconds use a little subdial, usually at 6 or 9 o'clock, driven directly by the wheel that turns once a minute; it's the classic, slim, dress-watch layout. Central seconds put a long seconds hand on the same axis as the hour and minute hands, for easier reading; it's the most common layout today. Deadbeat seconds make a mechanical seconds hand jump once a second, like quartz, using a special mechanism. On mechanical watches the seconds hand usually sweeps in small steps; on quartz it ticks.
The three layouts at a glance
|
|
Small seconds |
Central seconds |
Deadbeat seconds |
|---|---|---|---|
|
Where |
A subdial, usually at 6 or 9 |
In the center, with the hour and minute hands |
Either, usually central |
|
How it moves (mechanical) |
Sweeps in small steps |
Sweeps in small steps |
Jumps once per second |
|
Readability of seconds |
Good for a glance |
Easiest |
Easiest to read exact seconds |
|
Movement complexity |
Simplest |
Slightly more complex |
Much more complex |
|
Look |
Classic, dressy, vintage |
Sporty, modern, versatile |
Distinctive, technical |
|
Also called |
Petite seconde, subsidiary seconds |
Center seconds, sweep seconds |
Seconde morte, jumping seconds, true beat |
Why small seconds exist
In a traditional mechanical movement, the wheel that turns once a minute (the fourth wheel) sits off-center, between the center of the movement and the escapement. Putting the seconds hand straight onto that wheel is the simplest solution, which is why early pocket watches and many classic wristwatches show seconds on a subdial, usually at 6 o'clock.
On many movements originally designed for chronographs or derived from pocket watches, the small seconds sit at 9 o'clock instead.
Why people like small seconds:
- A clean, balanced dial with plenty of space
- A slim movement with fewer parts
- A traditional, elegant look that suits dress watches
- The seconds are there when you want them, without a long hand sweeping across the main dial
How central seconds work
Central seconds became widespread in wristwatches from the mid-20th century, especially on sports and military watches, where reading seconds quickly mattered. There are two ways to do it:
- Indirect central seconds: an extra wheel takes the motion from the off-center fourth wheel and carries it to a pinion in the center. It's an older, simpler conversion, but it can make the seconds hand flutter slightly.
- Direct central seconds: the movement is designed with the fourth wheel in the center, so the seconds hand mounts directly. Most modern automatic movements work this way.
Why people like central seconds:
- A long hand that's easy to read at a glance
- Precise reading against the outer minute track
- Easy setting to the second, especially with hacking seconds
- The sporty, purposeful look of most modern watches
How the seconds hand moves
|
Movement |
Seconds hand motion |
Why |
|---|---|---|
|
Mechanical at 21,600 vph |
6 small steps per second |
One step for each beat of the balance |
|
Mechanical at 28,800 vph |
8 small steps per second |
A higher beat rate looks smoother |
|
Mechanical at 36,000 vph |
10 small steps per second |
Very smooth |
|
Quartz |
1 tick per second |
Saves battery power |
|
Mechanical deadbeat seconds |
1 jump per second |
A special mechanism holds and releases the hand |
The "sweep" of a mechanical seconds hand is really a series of tiny steps, one per beat. Our guide to beat rate explains why higher beat rates look smoother.
What are deadbeat seconds?
Deadbeat seconds, also called seconde morte (French for "dead seconds"), jumping seconds or true beat, make the seconds hand of a mechanical watch jump exactly once per second instead of sweeping.
Why would a mechanical watch want to tick?
It sounds backward, since many people buy mechanical watches for the sweep, but a hand that lands exactly on each second is easier to read precisely. Before electronic instruments, doctors timing pulses, astronomers, and anyone synchronizing clocks valued that. Today, deadbeat seconds are mostly prized as a clever and unusual mechanism.
How it works
The seconds hand is separated from the smooth step-by-step motion of the gear train. A small spring or separate gear train stores energy, and a release mechanism, often a star-shaped wheel and a catch, lets the hand jump forward one full second at a time. Some designs use a constant-force device (a remontoir) that rewinds once per second.
A short history
Watchmakers built deadbeat seconds in the 18th century. Jean-Moïse Pouzait of Geneva presented a watch with independent deadbeat seconds in 1776, an important step toward the chronograph. The complication faded once quartz watches made ticking seconds ordinary, then returned in recent decades as a showpiece for a handful of high-end and independent makers.
Don't confuse it with the deadbeat escapement
The "deadbeat escapement" is a different thing: an escapement design, mainly for precision clocks, where the escape wheel doesn't recoil. It doesn't make a watch's seconds hand jump.
Running seconds vs chronograph seconds
On a chronograph, the large central seconds hand usually stays at 12 o'clock until you start the stopwatch. The watch's running seconds are on a small subdial instead. If your chronograph's central hand isn't moving, that's normal: it's the stopwatch hand, waiting to be started. Our guide to chronograph watches explains each hand.
Watches with no seconds hand
Some dress watches show only hours and minutes, for the cleanest possible dial. The downside is that you can't see at a glance whether the watch is running. Many people enjoy small seconds for exactly that reason: a tiny sign of life on the dial.
Which should you choose?
|
If you want... |
Choose... |
|---|---|
|
A classic, slim dress watch |
Small seconds |
|
Easy reading for sport, work or timing |
Central seconds |
|
A smooth, sweeping hand |
Mechanical central seconds, ideally at a higher beat rate |
|
Something unusual and technical |
Deadbeat seconds |
|
The simplest, most minimal dial |
Two hands only |
How this applies to Vardesso
If a Vardesso model has small seconds, central seconds or a two-hand dial, the product page will show it, and for mechanical models it will list the movement's beat rate, which decides how smoothly the seconds hand sweeps.
Questions and answers
What is small seconds on a watch?
A seconds hand on its own small subdial, usually at 6 or 9 o'clock, instead of in the center.
Why do some watches have small seconds?
In traditional movements the wheel that turns once a minute sits off-center, so mounting the seconds hand there is simple and keeps the movement slim.
What is central seconds?
A seconds hand mounted in the center of the dial, on the same axis as the hour and minute hands.
Why does my mechanical watch's seconds hand sweep?
It moves in several small steps each second, one for each beat of the balance wheel.
Why does a quartz watch tick once a second?
To save battery power, the motor moves the hand once per second.
What are deadbeat seconds?
A mechanical complication that makes the seconds hand jump once per second instead of sweeping.
What does seconde morte mean?
It's French for "dead seconds," another name for deadbeat or jumping seconds.
Is a ticking seconds hand a sign of a cheap watch?
Not necessarily. Most quartz watches tick, and some fine mechanical watches tick on purpose with deadbeat seconds.
Why isn't my chronograph's seconds hand moving?
On most chronographs, the central hand is the stopwatch and only moves when started. The running seconds are on a subdial.
Which is better, small seconds or central seconds?
Neither. Small seconds suit classic dress watches; central seconds are easier to read for sport and timing.
Who invented deadbeat seconds?
They date to the 18th century; Jean-Moïse Pouzait of Geneva presented an influential independent deadbeat seconds watch in 1776.
What is hacking seconds?
A feature that stops the seconds hand when you pull the crown out, so you can set the watch to the exact second.
Keep reading
- Beat rate explained
- Hacking seconds
- Chronograph watches explained
- Jumping hours, wandering hours and regulator dials