A chronograph is a watch with a built-in stopwatch. It keeps normal time with its hour and minute hands, and adds a separate timing function controlled by two pushers: usually the top pusher (at 2 o'clock) starts and stops the timer, and the bottom pusher (at 4 o'clock) resets it to zero. A large central hand counts the seconds, while small sub-dials count elapsed minutes and often hours. Chronographs are used for everything from timing races and flights to cooking, parking meters and workouts. Don't confuse a chronograph with a chronometer, which is a certified-accurate watch.
The parts of a chronograph
|
Part |
What it does |
|---|---|
|
Start/stop pusher (usually at 2) |
Starts the timer; press again to stop it |
|
Reset pusher (usually at 4) |
Returns all chronograph hands to zero when stopped |
|
Central chronograph seconds hand |
Counts elapsed seconds; usually stays at 12 when not in use |
|
Minute counter (sub-dial) |
Counts elapsed minutes, typically up to 30 or 60 |
|
Hour counter (sub-dial, on many) |
Counts elapsed hours, typically up to 12 |
|
Running seconds (sub-dial) |
Shows the watch's normal running seconds |
|
Scales on the bezel or dial (optional) |
Tachymeter, telemeter, pulsometer and others |
Layouts vary: two sub-dials ("bi-compax") and three sub-dials ("tri-compax") are both common, and positions differ by movement.
How to use a chronograph
- Make sure the chronograph is at zero. All chronograph hands should point to 12 (or their zero position).
- Press the top pusher to start timing. The central seconds hand begins to sweep.
- Press the top pusher again to stop. You can read the elapsed time now.
- Press the top pusher again to restart from where it stopped, if you want to add more time (useful for pausing).
- Press the bottom pusher to reset everything to zero, only when the chronograph is stopped.
On screw-down pushers, unscrew them first and screw them back down before getting the watch wet.
How to read elapsed time
Add the readings together:
- Hours from the hour counter
- Minutes from the minute counter
- Seconds from the central chronograph hand
Example: the hour counter shows 1, the minute counter shows 22, and the central hand points to 40. The elapsed time is 1 hour, 22 minutes and 40 seconds.
Tip: on 30-minute counters, check whether the hand is in the first or second half-hour. Many counters have marks at 3, 6 and 9 minutes, a tradition often linked to timing long-distance phone calls, which were once billed in three-minute units.
Everyday uses
- Timing cooking, coffee brewing and steeping tea
- Parking meters and appointments
- Workouts, runs, laps and rest intervals
- Meetings and presentations
- Flight and drive times
- Measuring speed with a tachymeter. See How to use a tachymeter
Mechanical vs quartz chronographs
|
|
Mechanical chronograph |
Quartz chronograph |
|---|---|---|
|
How it works |
Gears, levers, a clutch and cams |
Electronics and small motors |
|
Precision |
Usually to 1/5 or 1/6 second |
Often 1/10 or even 1/100 second |
|
Price |
Higher |
Lower |
|
Service |
Complex and more expensive |
Simpler; battery changes |
|
Character |
Smooth sweep and tactile pushers |
Practical and precise |
A third type, the meca-quartz chronograph, uses a quartz timekeeping movement with a mechanical chronograph module, giving the snappy feel of a mechanical reset at a quartz price. See Mecha-quartz chronographs and Quartz vs mechanical chronographs.
Types of chronographs
- Two-pusher chronograph: the standard design described above.
- Monopusher: one pusher, often built into the crown, cycles start, stop and reset.
- Flyback: pressing reset while running instantly restarts timing from zero.
- Split-seconds (rattrapante): a second seconds hand lets you time two events that start together.
See Chronograph types: monopusher, flyback and split-seconds.
Care tips
- Stop before you reset, unless your watch is a flyback. Pressing reset while running can strain a standard mechanism.
- Don't press pushers underwater unless the watch is designed for it; pushers can let water in.
- Running the chronograph continuously is generally fine on modern designs, but it does use extra energy and adds wear, so there's no need to leave it running as a seconds hand.
- Service chronographs on the recommended schedule; they have many more parts than time-only watches.
A short history
- 1816: Louis Moinet completed his "compteur de tierces," an instrument for astronomy, now recognized as the earliest known chronograph.
- 1821: Nicolas Rieussec built a timer for horse races that marked time with ink, giving us the word chronograph, from the Greek for "time writer."
- 1844: Adolphe Nicole developed the heart-shaped cam that returns hands to zero, the basis of the modern reset.
- 1910s to 1930s: chronographs moved to the wrist, first with single pushers, then with separate start and reset pushers.
- 1969: the first automatic chronograph movements were introduced by several makers in a race to be first.
- Since then: chronographs have timed motor races, flights and even moon missions, and remain one of the most popular complications.
See Racing and motorsport chronographs.
Chronograph vs chronometer
A chronograph is a stopwatch function. A chronometer is a watch certified as highly accurate. A watch can be one, both or neither. See Chronograph vs chronometer.
How this applies to Vardesso
If a Vardesso model is a chronograph, its product page will say whether it's mechanical, quartz or meca-quartz, and its manual will show the pusher functions and sub-dial layout for that movement.
Questions and answers
What is a chronograph watch?
A watch with a built-in stopwatch, controlled by pushers on the side of the case.
How do you use a chronograph?
Press the top pusher to start and stop, and the bottom pusher to reset once stopped.
What do the small dials on a chronograph do?
They count elapsed minutes and hours, and one usually shows the running seconds.
Why doesn't my chronograph's big seconds hand move?
On most chronographs the central hand only moves when the stopwatch is running. The running seconds are in a sub-dial.
Can I leave my chronograph running all the time?
It's generally fine on modern designs, but it uses extra energy and adds wear, so it's not necessary.
Should I stop a chronograph before resetting it?
Yes, unless it's a flyback chronograph.
What is the difference between a chronograph and a chronometer?
A chronograph is a stopwatch; a chronometer is a certified-accurate watch.
Can I use the chronograph underwater?
Only if the watch is specifically designed for it. Otherwise, don't press the pushers in water.
How accurate is a chronograph?
Mechanical chronographs usually measure to about 1/5 or 1/6 of a second; quartz ones often to 1/10 or 1/100.
What was the first chronograph?
Louis Moinet's compteur de tierces of 1816 is recognized as the earliest known chronograph.
What does chronograph mean?
It comes from Greek words for "time" and "writing."
What is a tri-compax chronograph?
A chronograph with three sub-dials, usually minute counter, hour counter and running seconds.
Keep reading
- Chronograph types: monopusher, flyback and split-seconds
- Column-wheel vs cam-actuated chronographs
- How to use a tachymeter
- Chronograph vs chronometer
- Racing and motorsport chronographs