A minute repeater chimes the time on demand. Press or slide a lever on the case and the watch strikes the hours with a low tone, the quarter hours with a double high-low chime, and the minutes since the last quarter with a high tone. At 10:53, for example, you'd hear ten low notes, three double notes and eight high notes. Invented so people could tell the time in the dark, the minute repeater is one of the most difficult complications to make, and it's often regarded as the summit of watchmaking.
How to read the chimes
|
Sound |
What it counts |
Example at 10:53 |
|---|---|---|
|
Low tones |
Hours |
10 low notes = 10 o'clock |
|
Double high-low tones ("ding-dong") |
Quarter hours past the hour |
3 double notes = 45 minutes |
|
High tones |
Minutes past the last quarter |
8 high notes = 8 more minutes |
Add them up: 10 hours + 45 minutes + 8 minutes = 10:53. At 2:05 you'd hear two low notes, no double notes and five high notes.
How a minute repeater works
A minute repeater is a small mechanical computer that reads the hands and translates them into sound.
|
Part |
What it does |
|---|---|
|
Slide or pusher |
Winds a small spring dedicated to the chime and starts the sequence |
|
Snails |
Stepped cams, one each for hours, quarters and minutes, that turn with the time and encode it in their shape |
|
Racks |
Toothed levers that drop onto the snails; how far each falls sets how many strikes it allows |
|
Hammers |
Two small hammers, one for each gong |
|
Gongs |
Hardened steel wires coiled around the movement, one tuned low and one high |
|
Governor |
A tiny regulator that controls the pace of the chimes, so they're even and unhurried |
|
All-or-nothing piece |
Prevents the watch from chiming at all unless the slide is pushed fully, so it never strikes the wrong time |
When you work the slide, the racks fall onto the snails and "read" the time. As the chime spring unwinds, the racks return step by step, and each step trips a hammer. The governor keeps the rhythm steady.
Because the chime has its own spring, playing it doesn't take energy from the timekeeping.
A short history
|
Period |
Milestone |
|---|---|
|
1670s to 1680s |
English makers develop repeating clocks and watches, so people can hear the time in the dark without striking a light; Edward Barlow and Daniel Quare both claim the repeating watch |
|
Early 1700s |
Quarter and five-minute repeaters spread |
|
About 1750 |
Thomas Mudge makes a minute-repeating watch, often cited as among the earliest |
|
1783 |
Abraham-Louis Breguet begins using coiled gong springs instead of bells, making repeaters slimmer and more resonant |
|
1890s |
The first minute repeater wristwatches appear |
|
20th century |
Repeaters become the preserve of a handful of specialist makers |
|
21st century |
Ultra-thin, high-tech and new-material repeaters push the craft forward |
Why minute repeaters are so hard to make
- Hundreds of tiny parts must work in precise sequence.
- The sound is the test. Each watch is tuned by ear; tone, volume, rhythm and the gaps between notes all matter.
- The case is part of the instrument. Its metal, thickness and construction change how the watch sounds.
- Few watchmakers can make one. Building and adjusting a minute repeater takes years of training, and a single watch can take many months.
What makes a good-sounding repeater?
Collectors listen for:
- Volume and clarity: loud enough to hear, with clean, distinct notes
- Harmony: low and high gongs that sound pleasant together
- Sustain: notes that ring rather than stop dead
- Rhythm: even spacing, with no long pause (sometimes called "dead time") between the hours, quarters and minutes
- Governor quietness: little whirring noise from the regulator
Longer "cathedral" gongs, which wrap around the movement more than once, give a deeper, richer sound.
Other chiming watches
|
Type |
What it does |
|---|---|
|
Quarter repeater |
Chimes hours and quarters on demand |
|
Five-minute repeater |
Chimes hours and five-minute intervals |
|
Decimal repeater |
Chimes hours, ten-minute intervals and minutes |
|
Petite sonnerie |
Strikes the hours on the hour and the quarters at each quarter, automatically |
|
Grande sonnerie |
Strikes the hours and quarters at every quarter, automatically, plus a repeater on demand |
|
Carillon or Westminster |
Uses three or four gongs to play a melody for the quarters |
|
Silent ("dumb") repeater |
Hammers strike the case so you can feel the time rather than hear it |
What does a minute repeater cost?
New minute repeater wristwatches from established makers usually cost six figures or more, and the rarest sell for far more at auction. Antique repeating pocket watches, especially quarter repeaters by lesser-known makers, can cost much less, from the low thousands.
Caring for a minute repeater
- Let the chime finish before you touch the crown, and never change the time while it's chiming.
- Work the slide fully and smoothly. Don't snap it or force it.
- Don't wear it in water unless the maker says it's water resistant; the slide is a weak point for seals.
- Use a specialist for service. Few watchmakers can service a repeater properly.
How this applies to Vardesso
If a Vardesso model offers a chiming function, the product page will explain what it strikes and how to work it, with a recording so you can hear it before you buy.
Questions and answers
What is a minute repeater?
A watch that chimes the hours, quarters and minutes on demand when you work a slide or pusher.
How do you read a minute repeater?
Count the low tones for hours, the double tones for quarter hours and the high tones for the minutes past the last quarter.
Why was the minute repeater invented?
So people could tell the time in the dark before electric light.
Who invented the minute repeater?
Repeating watches date to the 1680s in England; Thomas Mudge made an early minute repeater around 1750.
How does a minute repeater work?
Racks fall onto stepped snails that encode the time, then hammers strike two tuned gongs as a separate spring unwinds.
Why are minute repeaters so expensive?
They're extremely complex, tuned by ear and made by a small number of highly skilled watchmakers.
What is a cathedral gong?
A longer gong that wraps around the movement more than once, giving a deeper, richer tone.
What is the difference between a repeater and a sonnerie?
A repeater chimes only on demand; a sonnerie strikes the time automatically, like a clock.
What is a grande sonnerie?
A watch that strikes the hours and quarters automatically at every quarter, and usually includes a minute repeater.
Does a minute repeater drain the watch's power?
No. The chime runs on its own spring, wound by the slide.
Can I change the time while a repeater is chiming?
No. Let the chime finish first, or you risk damaging the mechanism.
Are minute repeaters water resistant?
Many aren't, or only slightly, because of the slide. Check the maker's rating.
What is a silent repeater?
A repeater whose hammers strike the case instead of gongs, so you feel the time rather than hear it.
Keep reading
- What is a watch complication?
- Grand complications
- Mechanical alarm watches
- What is a tourbillon?