British Watchmaking and the Invention of the Lever Escapement

British Watchmaking and the Invention of the Lever Escapement

Britain led the world in watchmaking in the 18th century. London makers improved accuracy dramatically, John Harrison solved the longitude problem, and around 1755 Thomas Mudge invented the lever escapement, which is still used in almost every mechanical watch. Britain’s hand-craft industry later lost out to Swiss and American factories, but British watchmaking has seen a revival in recent decades.

How did Britain become a watchmaking leader?

In the 1600s, London grew into one of Europe’s great centers of science and craft. In 1631, King Charles I granted a charter to the Worshipful Company of Clockmakers, a guild that regulated the trade in London. After the Royal Society was founded in 1660, scientists and craftsmen worked closely together.

Several London makers transformed timekeeping:

  • Robert Hooke, a scientist, worked on the balance spring in the 1660s and 1670s, in a famous priority dispute with the Dutch scientist Christiaan Huygens. See The History of the Balance Spring.
  • Thomas Tompion (1639–1713), often called the father of English clockmaking, made clocks and watches of outstanding quality and helped bring the balance spring into everyday use.
  • Edward Barlow developed the rack-and-snail mechanism that made repeating watches, which chime the time on demand, practical in the 1670s.
  • George Graham (1673–1751), Tompion’s successor, developed the deadbeat escapement for clocks and refined the cylinder escapement for watches.
  • John Harrison (1693–1776) built the marine timekeepers that solved the longitude problem. See The Longitude Problem and John Harrison.

By the late 1700s, English watchmaking led Europe in output, with large export markets as far away as the Ottoman Empire and China.

What is an escapement, and why did it need improving?

The escapement is the part of a mechanical watch that releases the power of the mainspring in tiny, regular steps and gives the balance wheel a small push to keep it swinging. It’s what makes a watch tick. See The Escapement Explained.

Early watches used the verge escapement, which stays in contact with the balance almost all the time. That constant contact disturbs the balance’s natural swing, so verge watches were never very accurate. Graham’s cylinder escapement was better, but its parts still rubbed against each other through most of the swing, which caused wear.

What watchmakers wanted was a detached escapement: one that leaves the balance completely free for most of its swing and touches it only briefly to unlock and give it a push.

Who invented the lever escapement?

Thomas Mudge (1715–1794), a London watchmaker trained by George Graham, invented the detached lever escapement around 1755. He first used it in a clock.

Around 1770, Mudge used the lever escapement in a watch made for King George III, which was given to Queen Charlotte. Known as the Queen Charlotte watch, it’s now in the Royal Collection.

Mudge never patented the lever escapement and didn’t push to make it widely. He thought it was too difficult to make for ordinary watches, and he spent his later years working on marine timekeepers instead. A few London makers, notably Josiah Emery, made small numbers of lever watches in the 1780s, but the design took decades to catch on.

How does a lever escapement work?

In simple terms:

  1. The escape wheel, driven by the mainspring, tries to turn.
  2. A pallet fork, shaped like an anchor with a forked tail, has two jewels that take turns blocking the escape wheel’s teeth.
  3. The balance wheel swings back and forth freely. As it swings, a small impulse jewel on the balance flicks the fork.
  4. That flick unlocks one tooth of the escape wheel. As the tooth slides along the pallet jewel, it pushes the fork, and the fork gives the balance a small push in return.
  5. The fork is then held out of the way, and the balance swings on without touching anything until it comes back to start the next cycle.

Because the balance is free for most of its swing, the lever escapement is far more accurate and stable than the verge or cylinder. It’s also robust enough for daily wear.

How did the lever escapement become universal?

It developed in stages, with British and then Swiss makers improving it.

  • 1791: Peter Litherland of Liverpool patented the rack lever, which used a toothed rack instead of a fork. It was more practical to make and was produced in large numbers in Liverpool and nearby Prescot.
  • Early 1800s: English makers developed what became the English lever, with a pointed-tooth escape wheel. It became the standard in good English pocket watches.
  • Mid to late 1800s: Swiss makers developed the Swiss lever, with club-shaped escape wheel teeth that spread wear more evenly and suited factory production. The Swiss lever became the worldwide standard.

Today nearly all mechanical watches use a version of the Swiss lever escapement. A notable modern alternative is the co-axial escapement, invented by an English watchmaker. More on that below.

What about the marine chronometer?

After Harrison, British makers John Arnold and Thomas Earnshaw developed the spring detent escapement in the 1780s. It was simpler and more practical to produce than Harrison’s designs. British-made marine chronometers became standard equipment on ships around the world through the 19th century, and the Royal Observatory at Greenwich tested them for the Royal Navy.

From the 1880s, Kew Observatory near London offered rating certificates for high-precision watches. The best performers earned a Kew A certificate, one of the most respected accuracy awards of its time. See Chronometer Certification.

How was the British watch industry organized?

English watchmaking worked through networks of specialists rather than factories.

Center

Role

Prescot, Lancashire

Made rough movements, the basic frames and wheels, plus tools and parts

Clerkenwell, London

Finished, adjusted and sold watches; the heart of the trade

Liverpool

Movement finishing and lever watches

Coventry

A major watchmaking city in the 19th century

Birmingham

Cases and parts

Christchurch, Dorset

Tiny fusee chains used in English watches

The name on the dial often belonged to the finisher or retailer, not the people who made most of the parts.

Why did British watchmaking decline?

The same specialist system that produced fine watches made it hard to modernize.

  • Swiss competition. In the 19th century, cheaper Swiss watches, some smuggled to avoid duties, flooded British markets.
  • American factories. From the 1850s, American companies made watches by machine with interchangeable parts, at a scale British workshops couldn’t match. See American Watch Factories.
  • Resistance to change. Many English makers held on to hand methods and older designs, like the fusee, longer than their competitors.
  • Failed modernization. Attempts to build factories, such as the Lancashire Watch Company in Prescot, founded in 1889, struggled and closed. The Lancashire company shut in 1910.

By the early 20th century, Britain made only a small share of the watches it bought.

What happened in the 20th century?

There were some notable efforts. After World War II, the British government backed domestic watch production. Smiths built watch factories in England and Wales, and its watches went with the 1953 British Everest expedition. Timex made watches in Dundee, Scotland, from 1946 until 1993. But British mass production faded in the 1970s and 1980s, as quartz and Asian competition reshaped the industry. See The Quartz Crisis.

Who was George Daniels?

George Daniels (1926–2011) is the most influential British watchmaker of modern times. He was one of very few people who could make an entire watch by hand, including the case, dial and every part of the movement. His book Watchmaking, published in 1981, is still a standard text.

Daniels also invented the co-axial escapement, patented in 1980. It’s designed to reduce sliding friction in the escapement, so the watch needs less lubrication and can go longer between services. After years of persuading the industry, Omega adopted it and launched its first co-axial watches in 1999. It’s the most significant new escapement adopted in mass production since the lever. See Watchmakers Who Shaped the Craft.

Daniels’ only apprentice, Roger W. Smith, continues his handmade approach on the Isle of Man.

Is British watchmaking coming back?

Yes, on a smaller scale. Since the 2000s, a number of British watch brands have been founded or revived, some designing and assembling watches in Britain and some working toward British-made movements. Independent makers carry on the hand-made tradition, and the British Horological Institute, founded in 1858, still trains and certifies watchmakers.

A short timeline of British watchmaking

Year

What happened

1631

The Worshipful Company of Clockmakers is chartered

1660s–1670s

Hooke works on the balance spring; Barlow develops repeating mechanisms

c. 1715–1726

Graham develops the deadbeat and cylinder escapements

c. 1755

Thomas Mudge invents the lever escapement

1759

Harrison completes his marine watch H4

c. 1770

Mudge makes the Queen Charlotte lever watch

1780s

Arnold and Earnshaw develop the spring detent chronometer

1791

Peter Litherland patents the rack lever

1858

The British Horological Institute is founded

1880s

Kew Observatory begins rating precision watches

1889–1910

The Lancashire Watch Company tries factory production

1946–1993

Timex makes watches in Dundee

1980

George Daniels patents the co-axial escapement

1999

The co-axial escapement enters mass production

How this applies to Vardesso

If your Vardesso has a mechanical movement, it almost certainly uses a Swiss-type lever escapement, the direct descendant of Thomas Mudge’s 1755 invention. That’s true of nearly every mechanical movement made today, whether it comes from Switzerland, Japan or China.

If the watch has an exhibition caseback, you can watch the escapement work: the pallet fork flicking back and forth and the balance wheel swinging. Every tick is Mudge’s idea, more than 250 years old, still doing its job. See How a Mechanical Watch Works.

Questions and answers

Who invented the lever escapement?

Thomas Mudge, an English watchmaker, invented the detached lever escapement around 1755. He used it in a watch for King George III around 1770.

What is the Queen Charlotte watch?

It’s a watch Thomas Mudge made around 1770 for King George III, who gave it to Queen Charlotte. It’s one of the earliest watches with a lever escapement and is now in the Royal Collection.

Why is the lever escapement so important?

It leaves the balance wheel free for most of its swing, which makes a watch far more accurate and reliable. Nearly every mechanical watch today uses a version of it.

What is the difference between the English lever and the Swiss lever?

The English lever uses an escape wheel with pointed teeth. The Swiss lever uses club-shaped teeth, which spread wear better and suit factory production. The Swiss lever became the world standard.

What is a rack lever?

A rack lever is an early lever escapement patented by Peter Litherland of Liverpool in 1791. It used a toothed rack to connect the lever to the balance.

Why did British watchmaking decline?

British makers relied on hand methods and specialist networks while Swiss and American makers moved to machine production with interchangeable parts. Cheaper imports and failed attempts at factory production finished the job.

What was Clerkenwell known for?

Clerkenwell, in London, was the center of English watch finishing and selling in the 18th and 19th centuries. Movements were often made in Lancashire and finished there.

What was Prescot known for?

Prescot, in Lancashire, specialized in rough watch movements, tools and parts, which were sent to London and elsewhere for finishing.

Who was George Daniels?

George Daniels was an English watchmaker who could make complete watches by hand. He invented the co-axial escapement, patented in 1980 and adopted in mass production in 1999.

What is a co-axial escapement?

It’s an escapement invented by George Daniels that reduces sliding friction, so the watch needs less lubrication and can run longer between services.

What is a Kew A certificate?

It was a top-grade accuracy certificate awarded to precision watches tested at Kew Observatory near London, starting in the late 19th century.

Are watches still made in Britain?

Yes, on a small scale. Several British brands design and assemble watches in the UK, and independent makers such as Roger W. Smith make watches by hand.

Keep reading

  • The Escapement Explained
  • The Longitude Problem and John Harrison
  • Watchmakers Who Shaped the Craft
  • Swiss Watchmaking History

Sources