German watchmaking has three main homes. Nuremberg was among the first places to make portable watches around 1500. The Black Forest became famous for clocks. And in 1845 Ferdinand Adolph Lange founded fine watchmaking in Glashütte, Saxony, which rose to world fame, was destroyed and nationalized after 1945, and revived after German reunification in 1990. Pforzheim, the Gold City, became the center of jewelry and everyday watches.
Where did German watchmaking begin?
In southern Germany. Around 1500, craftsmen in Nuremberg were making some of the first small, spring-driven portable clocks, the ancestors of the watch. The locksmith Peter Henlein is often credited, though the history is debated. See The First Portable Watches.
Augsburg and Nuremberg remained important centers of clock and watchmaking through the 16th and 17th centuries, known for elaborate table clocks and automata.
What is Black Forest clockmaking?
From the late 1600s, farming families in the Black Forest of southwestern Germany began making wooden clocks during the long winters, much like the watchmaking families of the Swiss Jura. By the 18th century, Black Forest clocks, including the famous cuckoo clock, were sold across Europe by traveling peddlers.
In the 19th century the region industrialized. A clockmaking school was founded in Furtwangen in 1850, and the town is now home to the German Clock Museum. In 1861 the Junghans company was founded in Schramberg, and by around 1900 it had become one of the largest clock makers in the world. Junghans later moved into watches and became known for two things:
- Bauhaus-influenced design. In the late 1950s and early 1960s, Swiss artist and designer Max Bill, a former Bauhaus student, designed clocks and watches for Junghans with spare, minimal dials that are still made today.
- Radio control. In 1990, Junghans introduced the first radio-controlled wristwatch, which set itself automatically from Germany’s official time signal.
How did Glashütte become a watchmaking town?
Glashütte is a small town in the Ore Mountains of Saxony, south of Dresden. It had been a silver-mining town, but by the 1800s the mines were exhausted and the area was poor.
Ferdinand Adolph Lange was a Dresden watchmaker who had trained under the court watchmaker Johann Christian Friedrich Gutkaes and then worked in France and Switzerland. He proposed to the Saxon government that watchmaking could replace mining as Glashütte’s livelihood. After long negotiations, the government gave him a loan, and on December 7, 1845, he opened his workshop in Glashütte and began training local young men as apprentices.
Lange didn’t want to make everything himself. He encouraged his trainees to set up their own workshops making specific parts, which built a complete local industry of suppliers. He also served as the town’s mayor.
What made Glashütte watches distinctive?
Glashütte watchmakers developed their own style, different from Swiss watches:
- The three-quarter plate. A single large plate covering most of the movement, making it more rigid and stable. It became the town’s signature.
- Gold chatons. Jewels set in gold settings held with blued screws.
- Hand-engraved balance cocks. Each one decorated by hand.
- Untreated German silver. Movement plates made of a copper, nickel and zinc alloy that develops a warm golden tone over time.
- Glashütte stripes. A ribbed decoration on the plates.
Lange’s sons joined the business, which became A. Lange & Söhne. Other important makers set up in town, including Julius Assmann and Moritz Grossmann. In 1878, Grossmann founded the German School of Watchmaking in Glashütte, which trained watchmakers from around the world. Around 1920, Alfred Helwig, a teacher at the school, developed the flying tourbillon. See What Is a Tourbillon?
What happened to Glashütte in the 20th century?
The 20th century was brutal for the town.
- Economic crisis. The aftermath of World War I and the Depression hit the luxury watch business hard. New companies were formed in the 1920s to make movements and keep the industry alive.
- World War II. Glashütte’s factories made military watches and instruments, including navigators’ watches. See Watches in the World Wars. On May 8, 1945, the last day of the war in Europe, a Soviet air raid destroyed Lange’s main factory building.
- Dismantling. After the war, Soviet occupation forces removed much of the remaining machinery as reparations.
- Nationalization. Glashütte ended up in communist East Germany. The watch companies were taken over by the state, and in 1951 they were merged into a single state-owned company, VEB Glashütter Uhrenbetriebe, known as GUB. The Lange name disappeared from watch dials.
For nearly 40 years, GUB made mechanical and later quartz watches for East Germany and the Eastern Bloc. They were solid, practical watches, but far from the fine watchmaking of the past.
How did Glashütte come back?
The Berlin Wall fell in 1989, and Germany reunified in 1990. Glashütte’s revival followed quickly.
- A. Lange & Söhne. Walter Lange, the founder’s great-grandson, who had fled to West Germany after the war, re-founded the company on December 7, 1990, exactly 145 years after his great-grandfather. With executive Günter Blümlein, he rebuilt it from scratch, and the new collection was presented in 1994.
- Glashütte Original. GUB was privatized and in 1994 became Glashütte Original. The Swatch Group bought it in 2000.
- New and revived brands. Nomos was founded in Glashütte in 1990, Mühle-Glashütte was re-established in 1994, and other historic names, including Moritz Grossmann, were revived in the 2000s.
In 2008, the German Watch Museum Glashütte opened in the old watchmaking school building. Today the small town is home to around a dozen watch companies.
What is the Glashütte rule?
Because the town’s name carries so much prestige, its use on a watch is protected. For more than a century, the town’s makers followed an unwritten rule that at least half a watch’s value had to be created there. In 2022, Germany made it law: under the Glashütte Regulation, a watch carrying the name Glashütte must have more than half of its added value created in the Glashütte area, with essential manufacturing steps done there. It’s similar in spirit to the Swiss Made rules. See Swiss Watchmaking History.
Why is Pforzheim called the Gold City?
Pforzheim, in southwestern Germany on the edge of the Black Forest, became a center for jewelry and watches in 1767, when the ruler of Baden, Margrave Karl Friedrich, supported a new jewelry and watch manufactory in the town, set up in its orphanage. The industry grew rapidly, and Pforzheim became known as the Goldstadt, or Gold City.
Through the 19th and 20th centuries, Pforzheim produced jewelry, watch cases and large numbers of affordable watches. In the 1930s, two major movement makers, Durowe and PUW, supplied movements to many German brands. Brands still associated with Pforzheim include Laco and Stowa, both of which made navigators’ watches during World War II.
On February 23, 1945, an Allied air raid destroyed most of Pforzheim’s center and killed roughly 17,000 people, about a fifth of the city’s population. The city rebuilt, and today it still has jewelry and watch companies and a well-known Jewellery Museum.
Where else are watches made in Germany?
Outside Glashütte and Pforzheim, German watchmaking includes Junghans in Schramberg in the Black Forest, tool-watch makers such as Sinn in Frankfurt, founded in 1961, and the jeweler Wempe in Hamburg, which also makes watches in Glashütte.
|
Center |
Known for |
|---|---|
|
Nuremberg and Augsburg |
Some of the earliest portable clocks and watches, around 1500 |
|
Black Forest |
Wooden clocks, cuckoo clocks, Junghans, the German Clock Museum |
|
Glashütte |
Fine watchmaking, three-quarter plates, A. Lange & Söhne, Glashütte Original, Nomos |
|
Pforzheim |
Jewelry, watch cases, movement makers, Laco and Stowa |
|
Frankfurt and Hamburg |
Tool watches and retail-led watchmaking |
A short timeline of German watchmaking
|
Year |
What happened |
|---|---|
|
c. 1500 |
Nuremberg craftsmen make early portable clocks |
|
Late 1600s |
Black Forest clockmaking begins |
|
1767 |
Pforzheim’s jewelry and watch industry is founded |
|
1845 |
Ferdinand Adolph Lange opens his workshop in Glashütte |
|
1850 |
A clockmaking school opens in Furtwangen |
|
1861 |
Junghans is founded in Schramberg |
|
1878 |
The German School of Watchmaking opens in Glashütte |
|
c. 1920 |
Alfred Helwig develops the flying tourbillon |
|
February 23, 1945 |
Pforzheim is destroyed in an air raid |
|
May 8, 1945 |
Lange’s main building is destroyed |
|
1951 |
Glashütte’s companies are merged into state-owned GUB |
|
1990 |
Germany reunifies; Lange is re-founded; Junghans makes the first radio-controlled wristwatch |
|
1994 |
Lange presents its new collection; Glashütte Original is formed |
|
2008 |
The German Watch Museum Glashütte opens |
How this applies to Vardesso
Vardesso doesn’t make German watches or claim German origin, but German watchmaking has shaped watch design everywhere. If you like clean, minimal dials with thin hands and simple markers, you’re enjoying a look that Junghans and Glashütte’s modern makers helped make popular, rooted in the Bauhaus idea that form should follow function.
If a Vardesso model you’re considering has a minimal dial in that spirit, check the product page for the movement and finishing details. The German tradition is a good reminder that the parts you can’t easily see deserve care too.
Questions and answers
Why is Glashütte famous for watches?
Ferdinand Adolph Lange founded fine watchmaking there in 1845, and the town became the center of German high-end watchmaking. After a long decline under East German rule, it revived after 1990 and is now home to several respected brands.
Who founded A. Lange & Söhne?
Ferdinand Adolph Lange founded the company in Glashütte on December 7, 1845. His great-grandson Walter Lange re-founded it on December 7, 1990.
What is a three-quarter plate?
It’s a single large movement plate that covers about three-quarters of the movement, supporting most of the wheels. It makes the movement sturdier and is a signature of Glashütte watchmaking.
What is German silver?
German silver is an alloy of copper, nickel and zinc with no actual silver. Glashütte makers often leave it untreated, so it develops a warm golden patina.
What was GUB?
VEB Glashütter Uhrenbetriebe, or GUB, was the state-owned company that combined Glashütte’s watchmakers in East Germany from 1951 until it was privatized in the 1990s.
What does Glashütte on a dial mean?
Under a German regulation passed in 2022, a watch with Glashütte on its dial must have more than 50 percent of its added value created in the Glashütte area, with essential manufacturing steps done there.
Who invented the flying tourbillon?
Alfred Helwig, a teacher at the German School of Watchmaking in Glashütte, developed the flying tourbillon around 1920. It has no upper bridge, so the cage looks like it’s floating.
Why is Pforzheim called the Gold City?
Pforzheim has been a center of jewelry and watchmaking since 1767, when a jewelry and watch manufactory was founded there. Its gold and jewelry trade earned it the name Goldstadt.
What was the first radio-controlled wristwatch?
Junghans introduced the first radio-controlled wristwatch in 1990. It set itself automatically using Germany’s official time signal.
What is a Bauhaus watch?
A Bauhaus watch has a clean, minimal design with simple markers and thin hands, following the Bauhaus idea that form should follow function. Max Bill’s designs for Junghans are classic examples.
Are German watches as good as Swiss watches?
The best German watches, especially from Glashütte, are considered equal to top Swiss watches in quality and finishing. As with any country, quality depends on the maker.
What happened to Glashütte after World War II?
A Soviet air raid destroyed Lange’s factory on the last day of the war, Soviet forces removed much of the machinery, and the companies were nationalized and merged into GUB in 1951.
Keep reading
- Swiss Watchmaking History
- The First Portable Watches
- The Mechanical Revival
- What Is a Tourbillon?