The automatic, or self-winding, watch was invented in the 1770s, when Swiss watchmaker Abraham-Louis Perrelet built pocket watches that wound themselves as the wearer walked. The idea only became practical on the wrist: John Harwood patented a self-winding wristwatch in 1923, and the 360-degree rotor introduced in 1931 became the design nearly every automatic uses today.
What is an automatic watch, in one paragraph?
An automatic watch is a mechanical watch with a weight inside, usually a half-moon-shaped rotor, that swings or spins as you move your wrist. Through a set of gears, that motion winds the mainspring, the coiled spring that powers the watch. Wear it every day and it keeps itself wound. Take it off and it runs until the stored energy runs out, usually somewhere between 38 hours and a few days. For a full walk-through of the parts, see How a Mechanical Watch Works.
Who invented the self-winding watch?
Credit usually goes to Abraham-Louis Perrelet of Le Locle, Switzerland, who made self-winding pocket watches in the 1770s. His watches used an oscillating weight that moved with the motion of walking.
Others were working on the same problem at about the same time:
- Hubert Sarton, a watchmaker in Liège, described a self-winding design with a rotor-like weight to the French Academy of Sciences in 1778.
- Abraham-Louis Breguet made self-winding pocket watches he called perpétuelles from the 1780s, using a weight that moved up and down.
The historical record from this period is patchy, and watch historians still argue about who did what first. What’s clear is that the idea existed more than 200 years ago.
Why didn’t self-winding pocket watches catch on?
Because a pocket watch doesn’t move enough. It sits in a waistcoat pocket, and unless its owner walks a great deal, the weight barely swings. Self-winding pocket watches were expensive, complicated curiosities, and most people found it easier to wind with a key or crown each day.
The wristwatch changed that. An arm is in motion almost all day, so a weight inside a wristwatch gets plenty of movement. Once wristwatches became normal after World War I, self-winding finally made sense. See How the Wristwatch Replaced the Pocket Watch.
Who made the first automatic wristwatch?
John Harwood, a watch repairer from Bolton, England, patented a self-winding wristwatch in 1923. His design used a weight that pivoted from the center of the movement and swung through part of a circle, bouncing off small springs at each end of its travel. Collectors call these bumper automatics because of the little knock you can feel as the weight hits the stops.
Harwood’s watch had another unusual feature: no winding crown. The wearer set the hands by turning the bezel. That meant one fewer opening for dust and water to get in.
Harwood watches went into production in the mid-1920s with the help of Swiss partners, and they sold in several countries. The company didn’t survive the Great Depression and was liquidated in 1931, but the bumper principle was adopted by many other makers through the 1930s and 1940s.
Other inventors tried different approaches. In 1930, Léon Hatot’s Rolls watch wound itself as the entire movement slid back and forth inside the case.
What changed in 1931?
In 1931, Rolex introduced its Perpetual movement, developed with its movement supplier Aegler. Instead of swinging through an arc and bumping against springs, the weight was a rotor that could spin a full 360 degrees. It wound the mainspring as it turned in one direction and spun freely in the other.
The full-rotor design was smoother, quieter and more efficient than bumpers. It’s the basic layout of almost every automatic movement made today.
Rolex patented the system, and for most of the 1930s and 1940s other brands had to use bumpers or work around the patent. When the protection ran out in the late 1940s, full-rotor automatics spread across the industry.
How did automatic winding improve after that?
The next 30 years were full of refinements. These are the ones you’ll hear about most:
|
Year |
Development |
Why it mattered |
|---|---|---|
|
1942 |
Felsa’s Bidynator movement winds the mainspring in both rotor directions |
Bidirectional winding captures more of the wrist’s motion |
|
1948 |
Eterna mounts its rotor on tiny ball bearings |
Less wear and friction; still the standard way to mount a rotor |
|
c. 1950 |
IWC introduces engineer Albert Pellaton’s pawl winding system |
A very efficient, durable winding mechanism |
|
1950s |
Micro-rotors appear, set into the movement instead of on top |
Thinner automatic watches |
|
1959 |
Seiko introduces the Magic Lever, a simple pawl lever that winds in both directions |
Cheap, efficient and still used in many Seiko movements |
|
1969 |
The first automatic chronographs reach the market |
Self-winding meets the stopwatch function |
The 1969 race to build an automatic chronograph, between Zenith, a Swiss group that included Heuer, Breitling and Hamilton-Buren, and Seiko in Japan, is told in The History of the Chronograph.
What’s the difference between one-way and two-way winding?
This is one of the most common questions about automatic watches, and it comes straight out of this history.
- Unidirectional winding means the rotor winds the mainspring only when it turns one way. The other direction spins freely. Rolex’s 1931 system worked this way, and so do some popular modern movements.
- Bidirectional winding means the rotor winds in both directions, using a reverser or a lever system. Felsa’s 1942 Bidynator was the first successful example, and Seiko’s Magic Lever is a famous later one.
Neither is simply better. Bidirectional systems collect more motion, but unidirectional systems can be simpler and wind efficiently in their direction. Both work well in daily wear.
What happened to automatic watches during the quartz era?
In the 1970s and 1980s, cheap and highly accurate quartz watches took over most of the market. Many automatic movements were discontinued, and some factories closed. See The Quartz Crisis.
A few things kept the automatic alive:
- Workhorse movements. A handful of reliable, mass-produced automatic calibers stayed in production and powered thousands of models. Swiss, Japanese and later Chinese makers all built them.
- Seiko’s affordable automatics. Seiko kept selling inexpensive automatic watches around the world, and its movements became a common entry point.
- The luxury revival. From the 1980s, Swiss brands repositioned mechanical watches as luxury goods. Automatics were at the center of that comeback. See The Mechanical Revival.
There was even a hybrid. In 1988, Seiko introduced a watch that used a rotor to generate electricity and power a quartz movement, a design later sold under the name Kinetic.
Where do automatic movements come from today?
Today the automatic is the most common type of mechanical movement in the world. Movement makers in Switzerland, Japan and China produce millions of automatic calibers a year, from simple three-hand movements to chronographs and tourbillons. Watch brands of every size buy these movements or make their own.
For how the global movement supply works, see Swiss Watchmaking History, The Japanese Watch Industry and The Chinese Watch Industry.
A short timeline of the automatic watch
|
Year |
What happened |
|---|---|
|
1770s |
Abraham-Louis Perrelet makes self-winding pocket watches |
|
1778 |
Hubert Sarton describes a rotor-type self-winding design |
|
1780s |
Breguet makes self-winding perpétuelle pocket watches |
|
1923 |
John Harwood patents a self-winding wristwatch with a bumper weight |
|
1930 |
Léon Hatot’s Rolls watch winds by sliding its movement |
|
1931 |
Rolex introduces the 360-degree rotor |
|
1942 |
Felsa introduces bidirectional rotor winding |
|
1948 |
Eterna mounts the rotor on ball bearings |
|
1959 |
Seiko introduces the Magic Lever |
|
1969 |
The first automatic chronographs go on sale |
|
1988 |
Seiko combines a rotor with a quartz movement |
How this applies to Vardesso
If your Vardesso has an automatic movement, its rotor is a direct descendant of the 1931 full-rotor design, mounted on ball bearings the way Eterna did it in 1948. Whether it winds in one direction or both depends on the movement, and the product page or spec sheet will name the movement so you can look it up.
A few practical tips for any automatic:
- Wear it, and it winds itself. A full day on the wrist is usually enough to keep it running overnight.
- Give it a head start. If it has stopped, wind it 20 to 30 turns by hand through the crown, if the movement allows hand winding, before you put it on. Most modern automatics do.
- Check the power reserve. It tells you how long the watch will run off the wrist. See Power Reserve Explained.
- Don’t worry about overwinding while wearing it. Automatic movements have a slipping clutch that stops the mainspring from being overwound.
Questions and answers
Who invented the automatic watch?
Abraham-Louis Perrelet of Le Locle, Switzerland, is usually credited with inventing the self-winding watch in the 1770s. Hubert Sarton and Abraham-Louis Breguet built self-winding pocket watches around the same time.
Who invented the automatic wristwatch?
John Harwood, a watch repairer from Bolton, England, patented the first practical self-winding wristwatch in 1923. It used a pivoting weight that swung through an arc and bounced off springs.
When was the rotor invented?
The full 360-degree rotor used in modern automatic watches was introduced by Rolex in 1931. Hubert Sarton had described a rotor-like weight in 1778, but it didn’t lead to wide use.
What is a bumper automatic?
A bumper automatic uses a weight that swings back and forth through part of a circle and bounces off small springs at the ends. It was common from the 1920s to the 1940s, before the full rotor took over.
Why didn’t self-winding pocket watches succeed?
Pocket watches don’t move enough in a pocket to keep a winding weight swinging. The idea only became practical once watches moved to the wrist, which is in motion most of the day.
What is the difference between automatic and self-winding?
They mean the same thing. Both describe a mechanical watch that winds its own mainspring from the motion of the wearer’s wrist.
Do automatic watches wind in both directions?
Some do and some don’t. Bidirectional movements wind as the rotor turns either way, while unidirectional movements wind only in one direction and spin freely in the other.
What is the Magic Lever?
The Magic Lever is Seiko’s bidirectional winding system, introduced in 1959. A simple lever with hooks converts the rotor’s motion in both directions into winding.
Why are rotors mounted on ball bearings?
Ball bearings let the rotor spin with very little friction and wear. Eterna introduced the idea in 1948, and it’s now standard in most automatic movements.
Can you overwind an automatic watch?
No, not under normal use. Automatic movements use a slipping mainspring bridle that lets the spring slip once it’s fully wound, so wrist motion can’t overwind it.
Is an automatic watch better than a quartz watch?
It depends on what you value. Quartz is more accurate and needs less care, while an automatic needs no battery and appeals to people who enjoy mechanical craftsmanship. See Quartz vs. Automatic vs. Mechanical.
How long does an automatic watch run off the wrist?
Most run for about 38 to 80 hours, depending on the movement’s power reserve. Some modern movements run for several days.
Keep reading
- How a Mechanical Watch Works
- Hand-Wound Mechanical Watches
- The History of the Chronograph
- The Mechanical Revival