The History of the Dive Watch: 1926 to Today

The History of the Dive Watch: 1926 to Today

The dive watch grew out of the first truly water-resistant wristwatch cases of the 1920s. Navies drove the next step in the 1930s, and the scuba boom produced the modern dive watch in 1953 and 1954, with a rotating timing bezel, strong lume and serious water resistance. An international standard, ISO 6425, followed in 1982.

Why were early watches so vulnerable to water?

A watch case has openings: the joint where the back meets the case, the seal around the crystal, and above all the stem that runs through the case to the crown. Early wristwatches had no reliable way to seal these. Water, sweat and dust got in, rusted steel parts and ruined lubricants.

Watchmakers tried double cases and tight-fitting covers through the 1910s and early 1920s, with mixed results. The crown was the hardest part to seal, because it has to turn and pull out.

Who made the first waterproof wristwatch?

The watch usually credited is the Rolex Oyster of 1926. Rolex bought the patent for a case with a crown that screwed down onto the case tube, sealing it like the lid of a jar, and combined it with a screwed caseback and bezel.

To prove it worked, Rolex turned to publicity. In October 1927, English swimmer Mercedes Gleitze wore an Oyster on a ribbon around her neck during an attempt to swim the English Channel. She didn’t finish that swim, but the watch was still keeping time at the end, and Rolex ran a front-page newspaper advertisement about it in November 1927. Rolex also displayed Oysters in fish tanks in jewelers’ windows.

The Oyster was a water-resistant watch, not a diving instrument. But it showed that a sealed wristwatch was possible.

What was the first watch made for divers?

Two efforts in the 1930s have the strongest claims.

The Omega Marine (1932). Omega took a different route around the crown problem: it put the whole watch inside a second, sealed outer case. The rectangular Marine is generally considered the first diver’s watch made for commercial sale. It was tested in Lake Geneva at a depth of 73 meters, and in 1936 the naturalist William Beebe wore one on a dive to about 14 meters.

Panerai for the Italian Navy (1936). In 1935 the Royal Italian Navy asked Panerai, a Florence instrument maker, for a luminous watch its frogmen could use underwater at night. Panerai’s answer, first made in 1936, used cases and movements made by Rolex, oversized 47-millimeter cushion cases for legibility, and Panerai’s own radium-based luminous paint called Radiomir. These watches served the navy’s special underwater units through World War II and were kept secret for decades.

How did scuba create the modern dive watch?

In 1943, Jacques Cousteau and Émile Gagnan developed the Aqua-Lung, the first widely successful open-circuit scuba system. After the war, scuba spread from navies to scientists and then to recreational divers.

A scuba diver’s biggest worry is air supply, and in the days before dive computers that came down to time. A diver needed to know exactly how long they’d been down. That need created the dive watch’s signature feature: a rotating bezel marked in minutes. You line up the zero marker with the minute hand when you descend, and the bezel shows elapsed time at a glance. See How to Use a Dive Bezel.

Why is 1953 called the year of the dive watch?

Because the two watches most people consider the first modern dive watches appeared in 1953 and 1954.

  • The Blancpain Fifty Fathoms (1953). Built for the French Navy’s new combat diving unit, led by Captain Robert Maloubier and Lieutenant Claude Riffaud. The divers asked for a black dial, large luminous markers, a rotating bezel that wouldn’t move accidentally, an automatic movement to reduce wear on the crown, and solid water resistance. Fifty fathoms is about 91 meters, roughly the limit of air diving at the time.
  • The Rolex Submariner (1954). Developed and tested in 1953 and introduced at the Basel watch fair in 1954, it had a rotating timing bezel, a screw-down crown and a bold, legible dial. It went on to define the look of the dive watch for decades.

Other makers launched dive watches around the same time, and through the 1950s and 1960s the style spread across the industry. In 1959 the U.S. Navy Experimental Diving Unit formally evaluated five dive watches, including the Fifty Fathoms, a Rolex, two Enicar models and a Bulova, showing how seriously militaries took the category.

How deep did dive watches go?

In January 1960, the bathyscaphe Trieste carried two men to the bottom of the Challenger Deep in the Mariana Trench, nearly 11,000 meters down. An experimental Rolex watch strapped to the outside of the vessel survived the dive.

That was a stunt, not a working dive watch. The real demand for deeper ratings came from commercial divers working on offshore oil platforms in the 1960s, who began living under pressure for days at a time.

What is a helium escape valve?

Commercial divers doing saturation diving live in pressurized chambers breathing a helium mix. Helium atoms are tiny, and over days they can seep past a watch’s gaskets. When the divers decompress, the trapped helium can’t escape fast enough, and the pressure inside the watch can pop the crystal off.

In the late 1960s, watchmakers including Rolex and Doxa developed a one-way helium escape valve that lets gas out of the case during decompression. It’s an essential tool for saturation divers and a curiosity for everyone else.

Japanese makers took a different approach and designed cases with special gaskets and construction that kept helium out in the first place.

When did Japan enter the dive watch market?

Seiko launched Japan’s first dive watch in 1965, rated to 150 meters, and it was used on Japanese Antarctic research expeditions. Through the late 1960s and 1970s Seiko made dive watches rated to 300 meters and then 600 meters, including professional models with titanium cases and outer shrouds. Affordable, tough Japanese dive watches became a huge part of the category. See The Japanese Watch Industry.

When did dive watches get a standard?

In 1982, the International Organization for Standardization published ISO 6425, the first international standard for divers’ watches. It requires things like a minimum of 100 meters water resistance, a time-preselection device such as a unidirectional bezel, legibility in the dark at 25 centimeters, and testing of every watch. It has since been revised. See The ISO 6425 Dive Watch Standard.

Do divers still use dive watches?

Most recreational and professional divers now use dive computers, which arrived in the 1980s. A computer tracks depth, time and decompression limits automatically.

Many divers still wear a mechanical or quartz dive watch as a backup, because a watch doesn’t need charging and can’t crash. But for most owners, the dive watch has become an everyday sports watch. It’s tough, legible, water resistant and easy to wear with almost anything. See Dive Watches.

A short timeline of the dive watch

Year

What happened

1926

Rolex introduces the screw-down Oyster case

1927

Mercedes Gleitze wears an Oyster during a Channel swim attempt

1932

The Omega Marine, a double-cased diver’s watch, goes on sale

1936

Panerai makes underwater watches for the Italian Navy

1943

Cousteau and Gagnan develop the Aqua-Lung

1953

The Blancpain Fifty Fathoms is made for French Navy divers

1954

The Rolex Submariner is introduced at Basel

1959

The U.S. Navy Experimental Diving Unit tests five dive watches

1960

An experimental watch rides the Trieste to the Challenger Deep

1965

Seiko launches Japan’s first dive watch

Late 1960s

The helium escape valve is developed for saturation divers

1982

ISO 6425 is published

1980s

Dive computers begin replacing watches as the primary dive timer

How this applies to Vardesso

If Vardesso offers a dive-style watch you’re considering, you’ll recognize the features from this history: a rotating timing bezel, strong lume, a screw-down crown and a high water-resistance rating. A few things to check on the product page:

  • Water-resistance rating. Look for at least 200 meters for a watch you plan to swim or snorkel in regularly, and check whether the crown screws down.
  • Bezel type. A unidirectional bezel only turns counterclockwise, so an accidental bump can only make your dive seem longer, never shorter. That’s the safe direction.
  • ISO 6425 certification. Most dive-style watches on the market aren’t certified to ISO 6425, and that’s fine for everyday wear. If a Vardesso model is certified, the product page should say so; if it doesn’t, assume it isn’t.
  • Lume. Modern lume is non-radioactive, unlike the radium paint on early navy watches. See Radium Dials and the Radium Girls.

Questions and answers

What was the first dive watch?

The Omega Marine of 1932 is generally considered the first diver’s watch sold commercially. The Rolex Oyster of 1926 came earlier but was a water-resistant everyday watch, and the Blancpain Fifty Fathoms of 1953 is often called the first modern dive watch.

What was the first waterproof watch?

The Rolex Oyster, introduced in 1926, is usually credited as the first commercially successful water-resistant wristwatch. Its screw-down crown and caseback sealed the case.

Who was Mercedes Gleitze?

She was an English long-distance swimmer. In October 1927 she wore a Rolex Oyster during an attempt to swim the English Channel, and Rolex used her in a famous newspaper advertisement.

What is the oldest dive watch still made?

The Blancpain Fifty Fathoms, from 1953, and the Rolex Submariner, from 1954, are the two best-known dive watch lines that have been made, in updated forms, ever since.

Why do dive watches have rotating bezels?

The bezel times a dive. A diver lines up its zero marker with the minute hand at the start, and the bezel then shows how many minutes have passed.

Why do dive watch bezels only turn one way?

A unidirectional bezel turns only counterclockwise. If it gets bumped, it can only make the elapsed time look longer, which errs on the safe side for a diver’s air supply.

What is a helium escape valve for?

It lets helium out of a watch during decompression after saturation diving. Without it, trapped helium could push the crystal off. Recreational divers don’t need one.

What is ISO 6425?

ISO 6425 is the international standard for divers’ watches, first published in 1982. It sets requirements for water resistance, legibility, a timing bezel and testing.

What does Fifty Fathoms mean?

A fathom is six feet, so fifty fathoms is 300 feet, or about 91 meters. That was roughly the practical depth limit for air diving in the early 1950s.

What was Panerai’s role in dive watch history?

Panerai made luminous underwater watches for the Royal Italian Navy’s frogmen starting in 1936, using cases and movements supplied by Rolex and its own radium-based luminous paint.

Do divers still use dive watches?

Most now rely on dive computers, but many still wear a dive watch as a backup timer. For most owners, a dive watch is an everyday sports watch.

How deep can a dive watch go?

Most dive watches are rated between 200 and 300 meters, which is more than any recreational diver needs. Specialist models go to 1,000 meters or more, and experimental watches have reached the deepest point in the ocean.

Keep reading

  • Dive Watches
  • The ISO 6425 Dive Watch Standard
  • How to Use a Dive Bezel
  • Watches in the World Wars

Sources