An anti-reflective (AR) coating is a set of microscopically thin layers applied to a watch crystal to cut glare, so you see the dial instead of a reflection of the sky. It matters most on sapphire, which reflects roughly 8% of light at each surface when uncoated. Brands apply AR to the inside of the crystal only, which is fully protected but leaves some outer glare, or to both sides, which looks clearest but exposes the outer coating to wear. AR coatings often give the crystal a faint blue, purple or green tint at an angle. Inside-only AR is the most durable choice; double-sided AR is the clearest.
Why do watch crystals reflect light?
Whenever light passes from one material into another, some of it bounces back. How much depends on the difference in refractive index between the two. Sapphire has a high refractive index, so it reflects much more than glass or acrylic.
|
Crystal material |
Approximate reflection per surface, uncoated |
Both surfaces combined |
|---|---|---|
|
Acrylic |
About 4% |
About 8% |
|
Mineral glass |
About 4% |
About 8% |
|
Sapphire |
About 8% |
About 15% |
|
Sapphire with good AR on both sides |
Well under 1% per surface |
Around 1 to 2% or less |
Figures are approximate and vary with the light's angle and color.
That difference explains why an uncoated sapphire crystal can look like a mirror in sunlight, and why AR coatings became common as sapphire spread through the industry in the 1980s and beyond.
How does an AR coating work?
An AR coating is made of one or more extremely thin layers of materials such as metal oxides or magnesium fluoride, each carefully controlled in thickness, often a fraction of a wavelength of light. When light reflects off the top and bottom of each layer, the reflected waves are offset so they cancel each other out (destructive interference). Less reflected light means more light passes through to the dial and back to your eye.
- Single-layer coatings reduce reflection mostly for one color of light.
- Multi-layer coatings stack several layers to reduce reflection across more of the visible spectrum, giving a clearer, more neutral result.
The layers are applied in a vacuum chamber, similar to the process used for camera lenses and eyeglasses.
Why AR coatings look blue or purple
No coating cancels every color equally. Many AR coatings are tuned to suppress the middle of the spectrum, the yellows and greens our eyes are most sensitive to, so the little light that still reflects is mostly blue or violet. That's the tint you see when you tilt a coated crystal. Some coatings are tuned for a green, amber or nearly neutral reflection instead. Some brands also offer "clear" coatings designed to minimize visible tint.
Inside, outside or both?
|
|
Inside only |
Both sides |
None |
|---|---|---|---|
|
Glare reduction |
Good: removes the inner reflection |
Best: the crystal can almost vanish |
None |
|
Durability |
Excellent: coating is sealed inside the case |
Outer coating can scratch or wear over time |
N/A |
|
Look |
Some reflection remains on the outer surface |
Very clear; visible tint at angles |
Mirror-like in bright light |
|
Typical use |
Tool and dive watches; many brands as standard |
Dress and pilot watches where clarity is a priority |
Some vintage-style and budget watches |
Why some brands coat only the inside
The AR coating itself is much softer than sapphire. On the outside of the crystal, it can be scratched by things that would never mark the sapphire beneath, leaving faint, hazy marks or patches that are visible at certain angles. Coating only the inside keeps the coating protected for the life of the watch while still removing a large share of the glare. For a tough everyday or dive watch, that's a sensible trade-off.
Why some brands coat both sides
Coating both surfaces gives the best legibility. It's popular on pilot watches, dress watches and watches with complex dials, where seeing every detail matters most. Some brands use particularly hard outer coatings to reduce wear. Some brands also offer double-sided AR as an option.
Can an AR coating be removed or redone?
Yes. A worn outer AR coating can usually be stripped by a specialist, leaving the sapphire undamaged, or the crystal can simply be replaced with a new one. Many owners who find their outer coating has worn choose to replace the crystal with an inside-only coated version.
AR coatings on domed crystals
Domed and box crystals reflect light from more angles than flat ones, so AR coatings make an even bigger difference on them. A double-domed sapphire crystal with AR on both sides is one of the clearest crystal combinations available. See Flat, domed and box watch crystals.
How to tell if your crystal has AR coating
- Tilt the watch under a light. A coated crystal shows a faint blue, purple or green tint in reflections. An uncoated sapphire reflects a bright, white image.
- Look straight on. A double-coated crystal can look almost invisible, as if there's no crystal at all.
- Look for haze on the outer surface. Worn outer AR often shows as cloudy patches that won't wipe away.
- Check the specifications. Brands usually state "AR inside," "AR both sides" or "double AR."
How to clean a coated crystal
- Use a clean microfiber cloth; a little warm water helps.
- Avoid abrasive pads, polishing compounds and paper towels on outer AR.
- Avoid harsh solvents and ammonia-based cleaners unless the brand says they're safe.
- Don't try to polish out marks on an AR-coated crystal; you may remove more coating.
How this applies to Vardesso
Vardesso watches use sapphire crystals unless a product page says otherwise. If a model has an anti-reflective coating, its product page will say whether it's on the inside, the outside or both.
Questions and answers
What is an anti-reflective coating on a watch?
Microscopically thin layers on the crystal that reduce glare, so the dial is easier to read.
Why does my watch crystal look blue or purple?
Most AR coatings leave a small amount of blue or violet reflection at angles. It's normal.
Is double-sided AR coating better?
It gives the clearest view, but the outer coating can wear. Inside-only AR is more durable.
Does AR coating scratch?
The coating is much softer than sapphire, so outer AR can show faint scratches or haze over time. Inside AR is protected.
Can AR coating be removed?
Yes. A specialist can strip worn outer AR, or the crystal can be replaced.
Does sapphire crystal need an AR coating?
Not necessarily, but uncoated sapphire is quite reflective, so most quality sapphire crystals are coated on at least one side.
Do mineral crystals have AR coating?
Sometimes, but less often, since glass reflects less than sapphire.
How do I know if my watch has AR coating?
Tilt it under a light. A colored tint in reflections usually means AR coating. The specifications should also say.
Why are some watches so hard to read in sunlight?
Usually an uncoated or outside-uncoated sapphire crystal reflecting the sky, especially with a domed crystal.
How do you clean an AR-coated crystal?
Use a microfiber cloth and a little warm water. Avoid abrasives and harsh chemicals.
Does AR coating affect water resistance?
No. It's an optical layer and doesn't change how the crystal seals.
Keep reading
- Sapphire vs mineral vs acrylic crystals
- Flat, domed and box watch crystals
- Date magnifiers (cyclops lenses)
- Reading the dial