Ceramic watch cases and bezels are usually made of zirconium oxide (zirconia), a high-tech ceramic that is molded from powder and fired at more than 1,400 °C. The result is several times harder than stainless steel, extremely scratch resistant, lighter than steel, hypoallergenic, and colored all the way through, so it doesn't fade. The trade-off is brittleness: ceramic doesn't dent, but a hard, sharp impact can chip or crack it, and damaged ceramic parts are replaced rather than repaired. Ceramic bezel inserts have become the standard on many modern dive and GMT watches for exactly these reasons.
What is watch ceramic?
The ceramic in watches isn't pottery. It's an engineered "technical" or "high-tech" ceramic, most often:
- Zirconium oxide (ZrO₂, zirconia): the most common, usually stabilized with a small amount of yttrium oxide for toughness. Used for cases, bezels, bracelets and inserts.
- Aluminum oxide (alumina): very hard, sometimes used for bezels and components.
- Silicon nitride and other carbides and nitrides: used by a few brands for special lightweight or colored cases.
Some brands also treat titanium so that its surface converts into a hard, ceramic-like layer, combining titanium's toughness with a ceramic-like surface.
How are ceramic watch cases made?
- Powder: Fine zirconia powder is mixed with pigments (metal oxides for color) and a binder.
- Molding: The mix is injected into a mold under pressure, forming an oversized "green" part.
- Debinding: The binder is removed.
- Sintering: The part is fired at over 1,400 °C. The particles fuse and the part shrinks significantly, often by around 20 to 30%, so the mold has to be designed with that shrinkage precisely calculated.
- Finishing: Because the fired ceramic is so hard, it can only be shaped and finished with diamond tools and abrasives. Polishing, brushing and engraving all take far longer than on steel.
Predicting and controlling shrinkage is the hard part, which is why ceramic watches cost more and why complex case shapes in ceramic are a sign of manufacturing skill.
Ceramic vs steel vs titanium
|
|
316L steel |
Grade 5 titanium |
Zirconia ceramic |
|---|---|---|---|
|
Approximate hardness (Vickers) |
About 150 to 200 |
About 300 to 350 |
About 1,200 to 1,400 |
|
Density |
About 8.0 g/cm³ |
About 4.4 g/cm³ |
About 6.0 g/cm³ |
|
Scratch resistance |
Low |
Moderate |
Very high |
|
Impact behavior |
Dents |
Dents |
Can chip or crack |
|
Color |
Metal |
Metal |
Any color, through the material; never fades |
|
Feel on skin |
Cool |
Warmer |
Warm, smooth |
|
Hypoallergenic |
Contains nickel |
Yes |
Yes |
|
Repair |
Can be refinished |
Can be refinished |
Usually replaced |
A short history of ceramic watches
- 1986: IWC released a Da Vinci chronograph with a zirconium oxide case, and Rado introduced its Integral with high-tech ceramic in its case and bracelet. Rado went on to make ceramic a signature.
- 2000: Chanel's J12 helped bring ceramic watches into mainstream luxury fashion with glossy black and white ceramic.
- 2000s: Ceramic bezel inserts began appearing on high-end dive and GMT watches and became the norm in the following decade.
- Today: Ceramic appears at many price levels, from affordable sports watches with ceramic inserts to full ceramic luxury watches in a growing range of colors.
Ceramic bezel inserts vs aluminum inserts
The bezel insert is the colored ring with the markings on a dive or GMT watch. Two materials dominate:
|
|
Aluminum insert |
Ceramic insert |
|---|---|---|
|
How it's colored |
Anodized (dyed) surface |
Colored through the material |
|
Scratch resistance |
Scratches and scuffs easily |
Highly scratch resistant |
|
Fading |
Fades with sun and salt water over years |
Doesn't fade |
|
Look |
Matte, tool-watch, vintage |
Glossy or matte, modern, luxurious |
|
Impact |
Dents |
Can chip or crack |
|
Cost |
Lower |
Higher |
|
Markings |
Printed or stamped |
Engraved and filled (with lacquer, lume or metal coatings) |
Many collectors love the way aluminum inserts fade over decades into unique shades, so neither is simply "better." Ceramic is the choice for a bezel that will look new for decades. See Watch bezels explained.
Can ceramic watches scratch?
Ceramic is extremely scratch resistant in normal life. Steel, keys, coins, door frames and most surfaces simply aren't hard enough to scratch it. Materials harder than ceramic, such as diamond, sapphire and some hard minerals and abrasives, can scratch it, so a polished ceramic case can show fine hairlines over years. Sometimes what looks like a scratch is actually metal rubbed off another surface, which can often be wiped or gently cleaned away.
Can ceramic watches crack or break?
Yes. Ceramic doesn't bend or dent, so energy from a sharp blow has nowhere to go. A fall onto a tile floor, or a knock against a stone counter at the wrong angle, can chip a bezel edge or crack a case. Modern zirconia is far tougher than it used to be, and many people wear ceramic watches for years without a problem, but it's the main trade-off. Some brands put a steel or titanium inner case or caseback inside a ceramic shell to add strength and allow secure screw threads.
Can ceramic be repaired?
Usually not. A chipped or cracked ceramic bezel insert or case part is normally replaced. Light polishing of ceramic is possible with diamond compounds, but it's specialist work and not something most watchmakers do.
Pros and cons of ceramic watches
|
Pros |
Cons |
|---|---|
|
Extremely scratch resistant |
Can chip or crack on a hard impact |
|
Color never fades |
Hard to repair; parts are replaced |
|
Lighter than steel |
More expensive to make |
|
Hypoallergenic, warm and smooth on skin |
Limited case shapes; less detail than machined metal |
|
Stays looking new for years |
Glossy surfaces show fingerprints |
How to care for a ceramic watch
- Clean with warm water, mild soap and a soft cloth or soft toothbrush.
- Avoid knocks against hard surfaces such as stone, tile and metal edges.
- Take it off for heavy work where impacts are likely.
- Have the movement serviced as usual; ceramic doesn't change service needs.
How this applies to Vardesso
If a Vardesso model has a ceramic bezel insert or ceramic case, its product page will say so. Otherwise, assume a 316L stainless steel case.
Questions and answers
What are ceramic watches made of?
Usually zirconium oxide (zirconia), a high-tech ceramic stabilized with yttrium oxide, molded and fired at over 1,400 °C.
Are ceramic watches scratch-proof?
Not completely, but nearly so in everyday life. Only very hard materials like diamond or sapphire will scratch them.
Are ceramic watches fragile?
They're very durable in normal wear, but a hard, sharp impact can chip or crack them.
Can a ceramic watch break if dropped?
It can, especially onto tile or stone. Many survive drops, but the risk is higher than with metal.
Is a ceramic bezel better than aluminum?
Ceramic resists scratches and never fades. Aluminum is cheaper and fades into a vintage look. It depends on what you want.
Do ceramic bezels fade?
No. The color runs through the material, so it doesn't fade with sun or salt water.
Can ceramic watches be repaired?
Usually the damaged part is replaced rather than repaired.
Are ceramic watches heavy?
They're lighter than steel but heavier than titanium.
Are ceramic watches hypoallergenic?
Yes. Zirconia is inert and nickel-free.
Why are ceramic watches expensive?
The material shrinks during firing and can only be finished with diamond tools, which makes production slow and demanding.
What was the first ceramic watch?
In 1986, IWC introduced a Da Vinci chronograph with a zirconia case and Rado introduced the Integral with high-tech ceramic.
Do ceramic watches get scratched by metal?
No. Metal is softer than ceramic, though metal can leave marks that look like scratches and wipe away.
Keep reading
- Watch case materials explained
- Watch bezels explained
- Carbon and composite watch cases
- Dive watches