A helium escape valve is a small one-way valve in the case of some dive watches. It exists for saturation divers, professionals who live for days or weeks in pressurized chambers breathing a helium-rich gas mix. Helium atoms are small enough to slip past a watch's gaskets into the case. During the long decompression back to surface pressure, that trapped helium can't escape fast enough, and the pressure inside the watch can push the crystal out. The valve lets the gas out safely. It was introduced in the late 1960s, and for recreational divers, swimmers and everyday wearers it isn't needed.
What is saturation diving?
Commercial divers who work at great depths, for example on offshore oil platforms, can't safely decompress after every dive. Instead, they live in a pressurized habitat or chamber at the pressure of their working depth for days or weeks, "saturated" with gas, commuting to the work site in a diving bell. At the end of the job, they spend days slowly decompressing back to surface pressure.
At those depths, divers breathe gas mixtures that replace most of the nitrogen with helium, because nitrogen at high pressure causes narcosis and other problems.
Why helium is a problem for watches
- Helium is tiny. Helium atoms are among the smallest of any gas and can slowly diffuse through or past rubber gaskets.
- It builds up inside. Over days in a pressurized chamber, helium gradually fills the watch case until the inside pressure roughly matches the chamber.
- It can't get out fast enough. During decompression, the chamber pressure drops, but the helium inside the watch escapes much more slowly than it entered.
- The crystal pops. Pressure inside the watch now exceeds pressure outside, pushing outward on the crystal. Before valves existed, crystals could be forced off.
How a helium escape valve works
|
Type |
How it works |
Notes |
|---|---|---|
|
Automatic |
A spring-loaded one-way valve opens by itself when inside pressure exceeds outside pressure by a set amount, then closes |
The original approach; no action needed |
|
Manual |
A screw-down valve, like a small crown, that the diver unscrews during decompression to let gas escape, then screws closed |
Must stay closed at all other times |
In both cases, the valve only lets gas out; it doesn't let water in when properly closed.
A short history
- 1960s: As saturation diving developed, including U.S. Navy research programs, divers noticed watch crystals popping off during decompression.
- 1967: Rolex developed its gas escape valve for the Sea-Dweller and filed a patent in November 1967, granted in 1970. Rolex worked with the French commercial diving company COMEX.
- 1969: Doxa released its SUB 300T Conquistador with a helium valve, often cited as the first such watch sold to the public; Rolex's valve-equipped Sea-Dweller reached the public around 1971.
- Today: Several brands fit helium valves to their professional dive watches.
Alternatives to a helium valve
Not every saturation-rated watch uses a valve. Some brands take the opposite approach: they seal the case so thoroughly that helium can't get in to begin with. Monobloc (one-piece) cases with no caseback, and special gasket designs, are two ways to do this. See Monobloc watch cases.
The ISO 6425 dive watch standard includes additional tests for watches intended for saturation diving. See ISO 6425: the dive watch standard.
Who actually needs a helium escape valve?
|
You... |
Need a helium valve? |
|---|---|
|
Swim, snorkel or surf |
No |
|
Scuba dive recreationally, including deep recreational dives |
No |
|
Do technical diving with helium mixes but surface without a saturation chamber |
Generally no |
|
Work as a saturation diver living in pressurized chambers |
Yes, or a watch built to keep helium out |
For almost everyone, a helium valve is a piece of diving history and a sign of a watch built to professional standards, not a feature they'll ever use.
Does a helium valve affect water resistance?
A well-made valve shouldn't reduce water resistance when it's closed. On watches with a manual valve, keep it fully screwed down unless you're decompressing in a saturation chamber. Treat it like a screw-down crown: never open it underwater, and have the whole watch pressure-tested at service.
How this applies to Vardesso
If a Vardesso dive watch includes a helium escape valve, its product page will say so. Most Vardesso owners won't need one: for swimming, snorkeling and recreational diving, a properly rated dive watch with a screw-down crown is what matters.
Questions and answers
What is a helium escape valve on a watch?
A one-way valve that lets helium out of the case during decompression after saturation diving, so pressure inside doesn't push the crystal out.
Do I need a helium escape valve?
Only if you're a saturation diver living in pressurized chambers. Recreational divers and swimmers don't.
How does a helium escape valve work?
An automatic valve opens by itself when internal pressure exceeds external pressure. A manual valve is unscrewed by the diver during decompression.
Why does helium get inside a watch?
Helium atoms are very small and can slowly pass gaskets during days at high pressure.
Who invented the helium escape valve?
Rolex filed a patent for its gas escape valve in 1967, and Doxa also released a helium-valve watch, the SUB 300T Conquistador, in 1969.
Does a helium valve let water in?
Not when it's closed and working properly. Keep manual valves screwed down.
Can I open my helium valve underwater?
No. Only open a manual valve during decompression in a dry chamber.
Do all dive watches have helium valves?
No. Most don't, and some saturation-rated watches use sealed or monobloc cases instead.
What is saturation diving?
A professional technique where divers live under pressure for days or weeks, then decompress slowly at the end.
Is a watch with a helium valve better?
It shows professional-grade design, but it doesn't make a watch better for everyday use or recreational diving.
Keep reading
- Dive watches
- ISO 6425: the dive watch standard
- How water resistance works
- Monobloc watch cases