Watch dial colors are created by adding thin layers on top of a metal base, usually brass. The main methods are galvanic (electroplated) finishes for metallic tones like silver, gold, rhodium and ruthenium gray; lacquer, sprayed in colored or clear coats for deep or glossy color; PVD, a vacuum-deposited film that gives vivid, durable colors like blue and green; and grand feu enamel, which is colored glass fired in a kiln. Varnish seals most dials. The same color can look very different depending on the method and the texture underneath, which is why a blue sunburst and a blue lacquer dial seem like different colors.
How a dial gets its color
Think of a dial as a stack of very thin layers:
|
Layer |
What it does |
|---|---|
|
Base |
Usually a thin brass disc; sometimes silver, gold, or a natural material |
|
Texture |
Sunburst brushing, stamping, graining or engine-turning, done before coloring |
|
Color |
Plating, PVD, lacquer or enamel |
|
Protective coat |
Clear varnish or lacquer to seal and protect |
|
Printing |
Text, scales and markers, pad-printed on top |
|
Applied parts and lume |
Metal markers, logos and luminous pigment |
Because the color layer is so thin, the texture underneath shows through, which is why the same color looks shimmering on a sunburst dial and flat on a matte one. See Watch dial finishes.
The main coloring methods
|
Method |
How it works |
Typical colors |
Look |
|---|---|---|---|
|
Galvanic (electroplating) |
Metal is deposited from a solution using electric current |
Silver, gold, rhodium, ruthenium gray, black, some colored tones |
Metallic, follows the texture closely |
|
Lacquer |
Colored or clear lacquer sprayed in coats, dried and often polished |
Any color, including deep black, white, burgundy, green |
Deep, glossy or satin |
|
PVD |
A thin film deposited in a vacuum chamber |
Blues, greens, black, gray, browns, rainbow effects |
Vivid, metallic, durable |
|
Varnish (tinted) |
Translucent tinted varnish over a metallic base |
Many colors, often over sunburst |
Rich color with metallic shimmer |
|
Grand feu enamel |
Colored glass powder fired in a kiln |
White, blue, black and others |
Pure, glassy, never fades |
|
Natural materials |
The material's own color |
Mother-of-pearl, stone, meteorite |
Unique on every dial |
Galvanic finishes
Galvanic coloring is electroplating: the dial is placed in a bath of dissolved metal, and an electric current deposits a thin, even layer on its surface. It produces classic metallic tones, including:
- Silver and white: often silver-plated with a matte or opaline finish
- Gold and champagne: gold plating in varying shades
- Rhodium: a bright, cool white-silver
- Ruthenium: a dark, slightly blue-gray metallic
- Black: black galvanic finishes for a metallic black
Because plating is so thin, it reproduces textures like sunburst brushing perfectly.
Lacquer
Lacquer is a paint-like coating applied in layers. A rich lacquer dial may have many coats, each dried and sometimes polished, to build depth. Lacquer gives the most control over exact color, so it's used for everything from crisp white to deep oxblood red. Clear lacquer over a metallic base gives the "wet" look on many sunburst dials.
PVD
Physical vapor deposition applies an extremely thin, hard film in a vacuum chamber, the same family of processes used to color watch cases black or gold. On dials, PVD creates vivid, metallic blues, greens, grays and blacks, and some special effects. It's durable and consistent from batch to batch. See PVD and DLC coatings.
Gradients (fumé and dégradé)
A gradient dial, often called fumé (smoked) or dégradé, shades from light at the center to dark at the edge. It's usually made by spraying color or tinted varnish more heavily toward the edge, sometimes with a mask, and it takes skill to make the transition smooth and even all the way around.
Enamel
Grand feu enamel is colored glass fused to the dial at high temperature. Its color is part of the glass itself, so it never fades. Enamel colors are limited by what metal oxides can produce in glass, and they're difficult to make consistently, which is part of their value.
Why some dial colors are hard to make
- Consistency: Thin layers vary slightly from batch to batch. Small differences show when dials sit side by side, so brands set strict color tolerances and reject dials that don't match.
- Matching parts: A dial, bezel insert, date wheel and strap made of different materials and methods must all look like the same color, which is difficult.
- Certain colors: Deep, saturated reds, pure whites that stay white, and bright, even greens have historically been harder to perfect, especially in enamel and ceramic.
- Lume compatibility: Lume plots and printing must look right on the color by day and by night.
Why dials look different in photos and in person
Metallic and sunburst dials change dramatically with the light: a blue sunburst can look almost black indoors and bright electric blue in sunlight. Cameras, screens and lighting add their own shifts. That's why the best product pages show dials in several lighting conditions, and why it's worth seeing a dial from more than one angle before you decide.
Why vintage dials change color
Older dials can change over decades:
- Tropical dials: some black dials from the mid-20th century faded to brown under sunlight, probably because of the pigments used. Collectors often value them highly.
- Patinated lume: old luminous paint can darken to cream, yellow or brown.
- Spider-webbing and cracking: old lacquer can develop fine cracks.
- Moisture damage: water inside a case can spot or stain a dial.
Modern materials are far more stable. A sealed modern dial kept away from moisture should look the same for decades.
Popular dial colors and what they say
|
Color |
Character |
Pairs well with |
|---|---|---|
|
Black |
Classic, legible, goes with everything |
Steel bracelets, black or brown leather |
|
White and silver |
Clean, dressy, highly legible |
Black or brown leather, bracelets |
|
Blue |
Versatile, the most popular "color" dial |
Steel, brown leather, navy or gray fabric |
|
Green |
Bold, outdoorsy or luxurious |
Brown leather, bracelets, olive fabric |
|
Gray and slate |
Understated, modern |
Bracelets, gray or black straps |
|
Champagne and gold |
Warm, celebratory |
Gold or two-tone cases, brown leather |
|
Salmon and copper |
Warm, vintage-inspired |
Brown leather, steel |
|
Burgundy |
Rich, dressy |
Black or dark brown leather |
|
Cream |
Vintage, soft |
Brown leather, canvas |
How this applies to Vardesso
Vardesso dials come in a range of colors and finishes. Product pages show each dial in photos, and photos taken in different light are the best way to see how a color shifts.
Questions and answers
How are watch dials colored?
With thin layers added over a metal base: electroplating, lacquer, PVD, tinted varnish or fired enamel.
What is a galvanic dial?
A dial colored by electroplating, which deposits a thin metal layer such as silver, gold, rhodium or ruthenium.
What is a lacquer dial?
A dial colored with layers of lacquer, often polished for depth and gloss.
What is a PVD dial?
A dial colored with a thin film deposited in a vacuum chamber, giving vivid, durable metallic colors.
What is a ruthenium dial?
A dial plated with ruthenium, a platinum-group metal that gives a dark, slightly blue gray.
Why does my blue dial look black?
Metallic and sunburst dials change with the light. In dim light, dark blue can look nearly black.
Do watch dials fade?
Modern dials are very stable. Some vintage dials faded from sunlight, creating "tropical" dials.
What is a tropical dial?
A vintage dial that faded from black to brown over time.
Why are some dial colors more expensive?
Some colors and methods, like deep reds or enamel, are harder to make consistently, so more dials are rejected.
What is a fumé dial?
A gradient dial that darkens from the center toward the edge.
What is the most popular watch dial color?
Black and blue are among the most popular, followed by white, silver, green and gray.
Keep reading
- Watch dial finishes
- Applied vs printed indices
- PVD and DLC coatings
- Reading the dial