Lume is the luminous material on a watch's hands, hour markers and bezel that lets you read the time in the dark. Almost all modern watches use a non-radioactive photoluminescent pigment based on strontium aluminate: it absorbs light, stores the energy, and releases it as a glow that is brightest right after charging and fades over several hours. A few watches use tiny sealed tritium gas tubes, which glow constantly for years without charging. Early watches used radioactive radium paint, which was later replaced by tritium paint and then, from the 1990s, by today's safe pigments.
How does modern lume work?
Modern lume is photoluminescent: it glows after being exposed to light, much like a glow-in-the-dark toy, but far brighter and longer-lasting.
- Charging: Light, especially sunlight, ultraviolet and blue light, excites electrons in the pigment crystals.
- Storing: Rare-earth elements added to the crystal (typically europium and dysprosium) create "traps" that hold that energy.
- Glowing: The trapped energy is released gradually as visible light, so the markers glow after the lights go out.
- Recharging: The process repeats indefinitely. The pigment doesn't get "used up."
The pigment is made from strontium aluminate crystals, developed in Japan in 1993 by the company Nemoto & Co. as a safe replacement for radioactive luminous paints. A Swiss joint venture formed in 1998 now supplies much of the watch industry, and several other pigment makers produce similar materials under their own names.
How long does lume glow?
Photoluminescent lume follows a predictable curve:
|
Time after charging |
What you typically see |
|---|---|
|
First few seconds to minutes |
Very bright, then a rapid initial fade |
|
10 to 30 minutes |
A steady, comfortable glow |
|
A few hours |
Dimmer but readable to dark-adapted eyes on a well-lumed watch |
|
Overnight |
Faint; on generously lumed dive watches, often still readable before dawn |
How long and how bright depends on the pigment grade and color, how thickly it's applied, how fully it was charged, and how dark-adapted your eyes are. See Luminous pigment grades and colors.
Types of watch illumination
|
Type |
How it works |
Needs charging? |
Radioactive? |
Era |
|---|---|---|---|---|
|
Radium paint |
Radium's radiation excites a phosphor |
No |
Yes, strongly |
About 1910s to 1960s |
|
Tritium paint |
Tritium's radiation excites a phosphor |
No |
Yes, weakly |
About 1960s to late 1990s |
|
Promethium paint |
Promethium's radiation excites a phosphor |
No |
Yes |
Briefly, 1970s to 1990s |
|
Photoluminescent pigment |
Stores light and re-emits it |
Yes, by light |
No |
1990s to today; the industry standard |
|
Tritium gas tubes |
Sealed glass tubes of tritium gas coated with phosphor |
No |
Yes, sealed |
Late 1980s to today, mostly tool and military watches |
|
Electroluminescent backlight |
A powered panel lights the dial at the press of a button |
Uses the battery |
No |
1990s to today on some quartz and digital watches |
A short history of lume
Radium (early 1900s to 1960s)
After radium was discovered in 1898, it was mixed with a phosphor such as zinc sulfide to make paint that glowed on its own. Radium dials were popular on military watches during the First World War and on everyday clocks and watches for decades. But radium is highly radioactive, and the women who painted dials in American factories in the 1910s and 1920s, who often shaped their brushes with their lips, suffered terrible illnesses. Their legal fight, as the "Radium Girls," helped establish worker-safety protections in the United States. Radium was phased out of watches by around the 1960s.
Vintage radium dials usually no longer glow, because the phosphor has broken down, but the radium remains radioactive. Vintage watch owners should leave old luminous material undisturbed and consult a specialist.
Tritium paint (1960s to 1990s)
Tritium, a radioactive form of hydrogen, gives off much weaker radiation than radium and replaced it on most watches. Dials with tritium paint were often marked with a "T" near the bottom, such as "T Swiss Made T." Because tritium has a half-life of about 12.3 years, tritium paint fades noticeably over a few decades, and old tritium lume often turns a creamy or tan color that collectors prize.
Modern photoluminescent pigment (1990s to today)
Strontium aluminate pigments, introduced in the 1990s, are non-radioactive, brighter than old zinc sulfide glow paints, and rechargeable for life. By the late 1990s they had replaced tritium paint across most of the industry.
Tritium gas tubes (late 1980s to today)
A small group of watchmakers instead use tiny sealed glass tubes containing tritium gas, which glow constantly without charging. See Tritium gas tube watches.
How lume is applied
Lume powder is mixed with a clear binder to form a paste or paint, then applied to the dial, hands and bezel:
- By hand: with a fine brush or syringe, layer by layer, especially on hands and applied markers
- By printing: pad or screen printing for flat markers and dots
- Filled into applied markers: hollow metal markers filled with lume
- Sandwich dials: a full layer of lume under a cut-out top dial
- In bezels: lume pips, lume-filled numerals, or lume integrated into ceramic bezel inserts
Thicker application glows brighter and longer, so a dive watch with large, deeply filled markers will usually out-glow a dress watch with fine lume lines. A white base layer under the lume can also increase brightness.
Why some watches glow brighter than others
|
Factor |
Effect |
|---|---|
|
Amount of lume |
More surface area and thickness = brighter and longer |
|
Pigment grade |
Higher grades hold their glow longer |
|
Color |
Green glow is typically the brightest; other colors trade some brightness for looks |
|
Charge |
Sunlight and UV charge lume far more than dim indoor light |
|
Application quality |
Even, dense layers glow better than thin or patchy ones |
|
Your eyes |
Eyes adapted to the dark see a faint glow far better |
Lume and dive watches
For dive watches, legibility in the dark is a safety feature. The ISO 6425 dive watch standard requires the time, the dive-timing bezel marker and a running indicator to be readable in darkness. That's why dive watches usually have the boldest lume. See ISO 6425: the dive watch standard.
Is lume safe?
Modern strontium aluminate lume is not radioactive and is considered safe. Tritium gas tubes contain a small amount of sealed radioactive gas, and their use in watches is regulated, with limits on the amount allowed. Old radium dials are the main concern, and should be handled only by specialists.
How this applies to Vardesso
If a Vardesso model has luminous hands and markers, its product page will say so and describe the type and color of the lume.
Questions and answers
What is lume on a watch?
The glow-in-the-dark material on the hands, markers and bezel that lets you read the time in the dark.
How does watch lume work?
Modern lume absorbs light, stores the energy in its crystal structure, and releases it slowly as a glow.
Is watch lume radioactive?
Modern photoluminescent lume is not. Old radium and tritium paints were, and tritium gas tubes contain sealed radioactive gas.
How long does watch lume last?
A charge glows for minutes to hours, depending on the grade, amount and charge. The pigment itself can be recharged for the life of the watch.
Why does my watch lume fade so fast?
Lume is brightest right after charging and drops quickly at first. Thin lume or a weak charge from dim light makes it fade faster.
How do I charge my watch lume?
Expose it to bright light, ideally sunlight or a bright flashlight, for a few seconds to a minute.
What is the brightest watch lume color?
Green is typically brightest. Blue-glowing lume is close behind.
What did old watches use for lume?
Radium paint from the early 1900s to the 1960s, then tritium paint until the 1990s.
Who were the Radium Girls?
Women who painted radium dials in American factories in the 1910s and 1920s and suffered severe illness, prompting landmark legal cases.
Do radium watches still glow?
Usually not, because the phosphor has broken down, but the radium is still radioactive.
What is the "T" on a vintage dial?
It indicates tritium lume, such as "T Swiss Made T."
What is the difference between lume and tritium?
Modern lume needs light to charge. Tritium tubes glow continuously without charging.
Does lume wear out?
Modern pigment doesn't wear out from charging. Over many decades, the binder can age.
Keep reading
- Luminous pigment grades and colors
- Tritium gas tube watches
- How to compare lume brightness yourself
- Dive watches