The Most Common Watch Movements in Affordable Watches

The Most Common Watch Movements in Affordable Watches

Most affordable mechanical watches run on one of a small group of movements: Seiko's NH35 and NH36, Citizen's Miyota 8215 and 9015, Sellita's SW200-1 or ETA's 2824-2 from Switzerland, and Chinese movements built to the 2824 design, such as the PT5000. Chronographs mostly use the Sea-Gull ST19 or Swiss 7750-type movements. Quartz watches mostly use Japanese or Swiss quartz movements. Knowing these few names tells you most of what you need to compare watches.

Automatic three-hand movements

Movement

Origin

Beat rate

Power reserve

Jewels

Hacking

Good to know

Seiko NH35

Japan

21,600 vph

about 41 h

24

Yes

Tough and inexpensive to replace; the NH36 adds a day display

Miyota 8215

Japan

21,600 vph

about 42 h

21

No

The budget workhorse; winds in one direction only

Miyota 8315

Japan

21,600 vph

about 60 h

21

Yes

Same family as the 8215 with a much longer reserve

Miyota 9015

Japan

28,800 vph

about 42 h

24

Yes

Only 3.9 mm thick; the 9039 is the no-date version

ETA 2824-2

Switzerland

28,800 vph

about 38 h

25

Yes

The classic Swiss workhorse, sold in four grades

Sellita SW200-1

Switzerland

28,800 vph

38–41 h

26

Yes

Built to the same dimensions as the 2824-2

PT5000

China

28,800 vph

about 38 h

25

Yes

A 2824-style movement from H.K. Precision Technology

Other Chinese makers, including Sea-Gull and Hangzhou, also build 2824-style automatics. In Swatch Group brands such as Tissot and Hamilton you will also find 80-hour automatics developed from the same architecture.

Reading the table. Beat rate is how many times the balance swings per hour: 21,600 gives six ticks a second, 28,800 gives eight and a smoother sweep. Power reserve is how long the watch runs once fully wound and taken off. Hacking means the seconds hand stops when you pull out the crown, so you can set the time to the second. All of these movements can also be wound by hand.

Chronograph movements

  • Valjoux or ETA 7750 (Switzerland). One of the most widely used automatic chronograph movements ever made, introduced in 1974. Sellita makes a movement built to the same design, the SW500.
  • Sea-Gull ST19 (China). A hand-wound chronograph with a column wheel, the design traditionally found in high-end chronographs, descended from the Swiss Venus 175. It beats at 21,600 vibrations per hour.
  • Seiko mecha-quartz (Japan). Seiko's VK series keeps time with quartz but uses a mechanical module for the chronograph, so the pushers click and the seconds hand snaps back to zero the way a mechanical chronograph's does.

Quartz and solar movements

Most quartz watches at affordable prices use movements from Miyota or Seiko in Japan, or from Ronda or ETA in Switzerland. They are accurate to within seconds a month, inexpensive and dependable, and many run about three years on a battery. Solar quartz movements, such as Citizen's Eco-Drive, recharge from any light and can run for years without a battery change.

How to choose

  • For the smoothest sweep and tightest regulation: a 28,800 vph movement such as the 9015, SW200-1, 2824-2 or PT5000.
  • For toughness and easy, cheap repairs: the Seiko NH35.
  • For a long power reserve: the Miyota 8315, or one of the 80-hour Swiss movements.
  • For a thin watch: the Miyota 9015.
  • For a chronograph on a budget: the Sea-Gull ST19 for a mechanical one, or a Seiko mecha-quartz for a lower price and quartz accuracy.
  • For the widest choice of watchmakers who can service it: the NH35, the 2824-2 or the SW200-1.

How to tell which movement is in a watch

  1. Read the specifications. Good brands name the movement, even when they rename it.
  2. Look through the caseback if it is clear. Rotors often show the maker and jewel count: 25 jewels suggests a 2824-2 or PT5000, 26 an SW200-1.
  3. Pull the crown. If the seconds hand stops, the movement hacks, which rules out a basic 8215.
  4. Watch the seconds hand. Count six steps a second for 21,600 vph, eight for 28,800.
  5. Ask the brand. You are entitled to know what you are buying.

How this applies to Vardesso

Every Vardesso product page names the exact movement inside the watch. If it is one of the movements in this article, the specifications above apply, and any watchmaker familiar with that movement can service it.

Frequently asked questions

Which affordable automatic movement is the most accurate? Out of the box, the 28,800 vph movements, such as the SW200-1, 2824-2, PT5000 and Miyota 9015, usually have tighter accuracy specifications than the 21,600 vph ones. How well a particular watch was regulated matters even more than the model of movement.

Which is the most reliable? All of the movements in this article are proven. The Seiko NH35 has a particular reputation for toughness and for being cheap to replace when it eventually wears out.

Is a mecha-quartz chronograph a real chronograph? Yes. It times events with a mechanical module, while quartz keeps the time. You get quartz accuracy and a lower price, without the sweeping seconds hand of a mechanical watch.

How long will an automatic watch run if I take it off? Most movements in this article run 38 to 42 hours, so a watch taken off on Friday evening will usually have stopped by Sunday. Longer-reserve movements can run through a weekend.

Keep reading

  • Japanese movements: why they power so many affordable watches
  • Swiss movements: history, makers and what "Swiss" guarantees
  • Chinese watch movements: what they are and how good they are
  • "Generic" and "clone" movements: what the terms mean

Sources