Chronometer Certification Explained: COSC, METAS, Geneva Seal and More

Chronometer Certification Explained: COSC, METAS, Geneva Seal and More

A chronometer is a watch whose movement has passed an official accuracy test. The best-known tester is COSC, the Swiss Official Chronometer Testing Institute, which checks each uncased mechanical movement for 15 days, in five positions and at three temperatures, and certifies it only if its average daily rate stays within −4 to +6 seconds and it passes six other criteria. Stricter standards build on that, testing the finished watch: Omega's METAS Master Chronometer, Rolex's Superlative Chronometer at −2 to +2 seconds a day, and the Grand Seiko Standard. Don't confuse a chronometer, a certified accurate watch, with a chronograph, which is a stopwatch.

Where chronometers came from

The word originally meant a marine chronometer, the precision clock ships used to work out longitude at sea. From the nineteenth century, observatories in Switzerland, Britain and elsewhere tested watches for accuracy and held competitions that pushed watchmakers to extraordinary precision. COSC was founded in its current form in 1973, bringing the Swiss testing offices together under one non-profit body backed by five watchmaking cantons and the Federation of the Swiss Watch Industry.

Today, COSC issues around two million certificates a year from three laboratories, in Biel, Le Locle and Saint-Imier. That is still only a few percent of Swiss watch production, so certification remains a mark of a higher grade.

How COSC tests a mechanical movement

Each movement is tested on its own, before it is cased, for 15 days. It is fitted with a seconds hand, wound daily, measured by cameras, and tested in five positions: dial up, dial down and three positions on edge. It is also tested at three temperatures: 8, 23 and 38 °C. Its results must meet all seven criteria of the international standard ISO 3159:

Criterion

What it measures

Limit for standard-size movements

Mean daily rate

Average gain or loss over the first 10 days

−4 to +6 seconds a day

Mean variation in rates

How consistent the rate is in each position

2 seconds a day

Greatest variation in rates

The worst inconsistency in any position

5 seconds a day

Horizontal vs vertical difference

Flat positions compared with edge positions

−6 to +8 seconds a day

Largest variation

The biggest gap between the average and any single reading

10 seconds a day

Thermal variation

How much the rate changes per degree

±0.6 seconds a day per °C

Rate resumption

Whether the rate returns to normal after the temperature tests

±5 seconds a day

Smaller movements, 20 mm and under, have slightly looser limits. Fail any criterion, and the movement isn't certified.

Quartz movements can also be certified, to a separate standard about 70 times tighter in daily rate. See High-accuracy and thermocompensated quartz.

What COSC doesn't test

COSC normally tests the movement, not the finished watch. Casing a movement, fitting the rotor and wearing it on a wrist all change how it performs. It also doesn't test magnetic resistance, water resistance or long-term reliability. That's why several makers now add their own testing of the cased watch on top.

Stricter standards

METAS Master Chronometer

Developed by Omega with METAS, the Swiss Federal Institute of Metrology, and introduced in 2015. The finished watch is tested over several days and must run within 0 to +5 seconds a day, at full wind and at a third of its power reserve, and resist magnetic fields of 15,000 gauss. The watch must already be COSC certified. Omega uses it across its range, and Tudor has adopted it for some models.

Rolex Superlative Chronometer

Rolex has its movements COSC certified, then tests the cased watch itself. Since 2015, its standard has been −2 to +2 seconds a day on the finished watch, along with checks of power reserve, water resistance and self-winding.

COSC Excellence Chronometer

COSC's newer, stricter certification starts with the standard 15-day movement test, then tests the cased watch again, using robots that simulate a day of wrist wear. The finished watch must stay within −2 to +4 seconds a day.

Grand Seiko Standard

Grand Seiko tests every 9S mechanical movement in-house for 17 days, in six positions and at three temperatures, and requires a mean daily rate of +5 to −3 seconds. Its Special Standard tightens that to +4 to −2. Grand Seiko has used its own standard since 1966 and raised it in 1998.

The Geneva Seal

The Geneva Seal, created in 1886, is as much about origin and craftsmanship as accuracy. The watch must be made in the Canton of Geneva and meet strict requirements for the finishing of every part. Since 2012, the finished watch must also be tested, and may deviate by no more than one minute over seven days. See Movement decoration.

Other marks

  • The Patek Philippe Seal, introduced in 2009 when Patek left the Geneva Seal, sets the brand's own accuracy and quality limits for its finished watches.
  • Besançon Observatory in France certifies chronometers and stamps them with a distinctive viper's-head mark.
  • Germany has its own chronometer standard, tested at the observatory in Glashütte.

How the standards compare

Standard

What's tested

Daily accuracy limit

COSC chronometer

Uncased movement, 15 days, 5 positions, 3 temperatures

−4 to +6 seconds

Grand Seiko Standard

Uncased movement, 17 days, 6 positions, 3 temperatures

−3 to +5 seconds

COSC Excellence Chronometer

Movement, then cased watch

−2 to +4 seconds

METAS Master Chronometer

Cased watch, plus magnetism to 15,000 gauss

0 to +5 seconds

Rolex Superlative Chronometer

Cased watch

−2 to +2 seconds

Does a chronometer keep better time on your wrist?

Generally, yes, though with caveats. A certified movement has proved itself consistent across positions and temperatures, which is a good predictor of real-world performance. But certification is a snapshot: a chronometer that is magnetized, dropped hard or overdue for service will keep time no better than any other watch until it's fixed. And many uncertified watches perform at chronometer level; their makers have simply not paid for the certificate. See Regulating a watch.

Chronometer vs chronograph

  • Chronometer: a watch certified for accuracy.
  • Chronograph: a watch with a stopwatch function.

A watch can be both, as many famous sports watches are, or either, or neither. See Mecha-quartz chronographs for more on chronographs.

How this applies to Vardesso

Where a Vardesso model's movement carries a chronometer certificate, its product page says so and names the standard. Where it doesn't, the page gives the movement maker's accuracy specification instead. We don't use the word "chronometer" for any watch that hasn't been certified.

Frequently asked questions

What does "chronometer" mean on a watch? That its movement passed an official accuracy test, usually COSC's.

How accurate is a COSC chronometer? Its average daily rate in testing must fall between −4 and +6 seconds.

Is a chronometer the same as a chronograph? No. A chronometer is certified for accuracy; a chronograph has a stopwatch.

Are quartz watches ever chronometers? Yes. COSC certifies quartz movements to a much tighter standard.

Is METAS stricter than COSC? Yes. It tests the finished watch, to 0 to +5 seconds a day, and includes strong magnetic resistance.

Do I get a certificate with a chronometer? Some brands include one; others record it by serial number.

Keep reading

  • Positional variance
  • Regulating a watch
  • High-accuracy and thermocompensated quartz
  • Magnetism and watches
  • What "Swiss Made" legally means

Sources