German Watchmaking and Glashütte: History and Hallmarks

German Watchmaking and Glashütte: History and Hallmarks

German fine watchmaking centers on Glashütte, a small town in Saxony where Ferdinand Adolph Lange founded a watch industry in 1845. Glashütte watches are known for the three-quarter plate, hand-engraved balance cocks and a great deal of hand finishing. Since 2022, German law has allowed a watch to carry the Glashütte name only if more than half of its value is created there.

From silver mines to watches

Glashütte grew up around silver mining in the Ore Mountains south of Dresden. By the 1800s the mines were exhausted and the town was poor. In 1845 Ferdinand Adolph Lange, a Dresden watchmaker, persuaded the Saxon government to lend him the money to start a watch industry there. He trained local young men as apprentices, and many of them went on to open their own workshops making parts, so that the town became a network of specialists rather than one factory. Lange's friend Moritz Grossmann was among the watchmakers who helped build that community, including the watchmaking school that trained generations of its craftsmen.

Lange's designs set the town's style. His three-quarter plate, a single large bridge covering most of the movement, made the movement sturdier. Glashütte makers added hand-engraved balance cocks, fine-adjustment regulators shaped like a swan's neck, and jewels set in screwed gold settings called chatons. Over the following decades the town supplied pocket watches, precision clocks and, during the Second World War, pilot's watches and marine chronometers.

Under East Germany

The end of the war left Glashütte in the Soviet zone. The town's companies were taken into state ownership in 1948, and in 1951 they were merged into a single state enterprise, VEB Glashütter Uhrenbetriebe, known as GUB. The Lange family name disappeared from watch dials. Walter Lange, the founder's great-grandson, left for the West. For nearly forty years GUB kept watchmaking alive in the town, producing watches in volume for the East German market and for export.

The rebirth

When Germany reunified, Glashütte came back quickly:

  • January 1990. Roland Schwertner founds Nomos Glashütte. Its first watches appear in 1991, and the brand later becomes known for its clean design and its own movements.
  • December 7, 1990. Walter Lange, with Swiss watch executive Günter Blümlein, re-founds A. Lange & Söhne, 145 years to the day after his great-grandfather. Its first collection, including the Lange 1, is shown in October 1994.
  • 1994. The privatized GUB becomes Glashütte Original, which later joins the Swatch Group in 2000.

Today about ten watch companies operate in or around the town, including Mühle-Glashütte, Tutima, Moritz Grossmann, Union Glashütte and Wempe, alongside the three above.

The Glashütte rule

For decades the town's makers followed an unwritten rule: a watch could carry the name Glashütte only if at least half of its value was created there. In 2022 that rule became a federal regulation. It requires that more than 50 percent of the value added in the essential stages of manufacture be created in the Glashütte region, and it names steps that must be done entirely in Glashütte, including assembling and starting the movement, fine adjustment, fitting the dial and hands, and casing the movement. Some parts, such as jewels, may come from elsewhere, as long as the overall threshold is met.

The practical result: "Glashütte" on a dial is a stronger statement than "Made in Germany," and in some ways a stricter one than "Swiss Made."

Germany beyond Glashütte

Glashütte is not the only German watch region:

  • Pforzheim, in the southwest, is a center of jewelry and watchmaking. Brands from the area, such as Stowa and Laco, made pilot's watches for the German air force in the Second World War and still make pilot's watches today.
  • The Black Forest has a long clockmaking tradition and is home to Junghans in Schramberg.
  • Frankfurt is home to Sinn, known for rugged tool watches.

Many of these brands build their watches around Swiss movements, which they refine, finish or modify in Germany.

What to look for in a Glashütte movement

  1. A three-quarter plate, often made of untreated German silver that slowly takes on a warm patina.
  2. A hand-engraved balance cock, each one slightly different because it is cut by hand.
  3. A swan-neck regulator for fine adjustment of the rate.
  4. Gold chatons, the screwed gold settings that hold some jewels.
  5. Blued screws and stripes of decoration across the plate.
  6. "Glashütte I/SA" on the dial, meaning Glashütte in Saxony.

How this applies to Vardesso

Vardesso watches do not use Glashütte movements; at our prices, almost no one does. We include Glashütte because no honest account of watchmaking is complete without it, and because a town that rebuilt its craft after losing nearly everything is a story worth telling.

Frequently asked questions

What is a three-quarter plate? A single large bridge that covers roughly three-quarters of a movement, holding many of the wheels in place at once. It makes the movement sturdier, and it is the most recognizable feature of Glashütte watchmaking.

Are German watches better than Swiss watches? At the top, the best German and Swiss makers are equals, and the choice comes down to taste. German watches tend toward restrained design and visible hand finishing.

What does "Glashütte I/SA" on a dial mean? "Glashütte in Sachsen," Glashütte in Saxony. It distinguishes the town from others with similar names.

Is a Glashütte watch Swiss Made? No. Glashütte is in Germany and has its own legal standard for using its name.

Keep reading

  • Swiss vs Japanese vs Chinese vs German movements
  • What "Swiss Made" legally means
  • Swiss movements: history, makers and what "Swiss" guarantees

Sources