Hacking Seconds Explained: What a Hacking Watch Is and How to Use It

Hacking Seconds Explained: What a Hacking Watch Is and How to Use It

Hacking, also called stop-seconds, is a feature that stops a watch's seconds hand when you pull the crown out to set the time. A small lever touches the balance wheel and holds it still, so the whole movement pauses. You can then line the hands up with an accurate time source and push the crown back in at exactly the right moment, setting the watch to the second. Most modern mechanical movements and nearly all quartz watches hack; some popular affordable automatics don't.

How hacking works

Pulling the crown out to the time-setting position moves the setting lever inside the movement. On a hacking movement, that motion also swings a thin stop lever, sometimes a simple wire spring, against the rim of the balance wheel. With the balance held still, the escapement stays locked, the gear train can't advance, and the seconds hand freezes. Push the crown back in, the lever lifts away, and the balance springs back into motion. See The balance wheel and hairspring.

In a quartz watch, the same thing happens electronically: pulling the crown cuts the pulses to the motor, which also saves battery power while the watch is stopped.

Why you want it

  • Setting the exact time. Without hacking, you can get the minute right but the seconds will be wherever they happen to be.
  • Synchronizing. Matching your watch to an official time source, or to someone else's watch, takes seconds.
  • Checking accuracy. To see how many seconds a day your watch gains or loses, you need to start from a known point. Hacking makes that easy.
  • Satisfaction. Many owners simply enjoy a watch that is exactly right.

Where the name comes from

The word comes from military slang. Crews needed their watches synchronized before an operation, and the call to start them together was "hack." Watches made to military specifications in and after the Second World War often had to include a stop-seconds feature for exactly this reason. The exact origin of the word is debated, but the meaning has stuck.

Which movements hack?

Movement

Type

Hacking

Seiko NH35 / 4R36

Automatic

Yes

Seiko 7S26 (older)

Automatic

No

Miyota 8215

Automatic

No on most versions

Miyota 9015

Automatic

Yes

ETA 2824-2

Automatic

Yes

Sellita SW200-1

Automatic

Yes

Swatch Group Powermatic 80

Automatic

Yes

Most quartz movements

Quartz

Yes

The Miyota 8215 is the best-known exception today: it is a tough, dependable movement, but on most versions the seconds hand keeps running when you pull the crown. Some newer variants add a stop-seconds device, so check the specific watch.

How to check whether your watch hacks

  1. Unscrew the crown first if it screws down.
  2. Pull it all the way out to the time-setting position.
  3. Watch the seconds hand. If it stops, your watch hacks. If it keeps sweeping, it doesn't.

Product pages often list the feature as "hacking," "stop-seconds" or "seconds stop."

How to set your watch to the second

  1. Find an accurate time source. In the United States, time.gov shows official time from NIST. A phone's clock is also very accurate.
  2. Wait for the seconds hand to reach 12, then pull the crown out. The seconds hand stops at zero.
  3. Set the minute hand to the next minute. For the neatest result, move the minute hand a little past the marker and then back onto it. That takes up the tiny play in the gears, so the minute hand lines up exactly with the markers as the watch runs.
  4. Wait for the reference to reach that minute. When your time source hits zero seconds, push the crown in.
  5. Screw the crown down if your watch has a screw-down crown.

It takes a few seconds of attention, and the watch is right to within a second or so.

How to set a watch that doesn't hack

You can still get close.

  1. Set the minute hand to the minute that is about to come.
  2. Push the crown in with the minute hand slightly behind its marker, and note where the seconds hand is.
  3. Adjust on the next try. If you need precision, repeat the setting with the minute hand nudged so that it reaches the marker just as the seconds hand passes 12.

You'll rarely get it perfect, but within several seconds is usually easy. Resist the temptation to stop the balance with a fingernail or a tool through an exhibition caseback: it can damage the hairspring.

Common questions about using it

  • Does hacking harm the movement? No. It is designed to be used every time you set the watch.
  • Can I leave the crown pulled out to stop the watch? It won't hurt the movement, but the watch's water resistance is compromised while the crown is out, and dust can get in. Push it back in when you're done.
  • Does a hacking watch also hand-wind? Not necessarily. They are separate features. The old Seiko 7S26 had neither; the NH35 has both.
  • What if my watch stops when the crown is in? That isn't hacking; the watch has probably run out of power or needs attention. See Why did my automatic watch stop?

Going further: zero-reset seconds

A few high-end watches go a step beyond hacking. Pull the crown, and the seconds hand doesn't just stop; it jumps straight to zero, ready for you to start the watch on the minute. It is a small luxury, but a satisfying one.

Does a watch need hacking?

For many people, no. A watch that gains or loses a few seconds a day will drift away from the exact second within days anyway. But hacking makes setting quicker and more precise, makes it easy to check your watch's accuracy, and is one of the small details that separates a better movement from a basic one. When choosing between two otherwise similar watches, it's a sensible tiebreaker.

How this applies to Vardesso

Where a Vardesso model uses a mechanical movement, its product page states whether the movement hacks and whether it can be wound by hand, so you know exactly how to set and wind it.

Frequently asked questions

What does hacking mean on a watch? The seconds hand stops when you pull the crown out, so you can set the time to the second.

Is hacking the same as stop-seconds? Yes. They are two names for the same feature.

Do quartz watches hack? Almost all do.

Do all automatic watches hack? No. Most modern ones do, but some popular movements, including most versions of the Miyota 8215, don't.

Is it bad to hack my watch often? No. It's designed for regular use.

Why is my minute hand between markers when the seconds hand is at 12? Set the minute hand slightly past the marker and then back onto it before pushing the crown in.

Keep reading

  • How a mechanical watch works, from mainspring to hands
  • The balance wheel and hairspring
  • Power reserve explained
  • The rotor: one-way vs two-way winding
  • The movements you'll find in most affordable watches

Sources