An in-house movement is one that a watch brand designs and makes itself, rather than buying from a specialist movement maker. In practice, there's no legal definition, and the term covers everything from movements built entirely under one roof to designs made by a sister company or a close partner. In-house movements can offer distinctive features and prestige, but they usually cost more and can be harder to service. Proven supplier movements, by contrast, are refined over decades and can be serviced by almost any watchmaker. Neither is automatically better. What matters is the quality of the specific movement and honesty about where it comes from.
The vocabulary
- In-house: designed, and largely made, by the watch brand itself. Usage varies widely.
- Manufacture: from the French manufacture d'horlogerie, a company that makes its own movements. Swiss brands often use "manufacture caliber" to mean the same as in-house.
- Proprietary or exclusive: a movement made only for one brand or group, sometimes by another company.
- Ébauche: historically, a movement kit or blank that a brand finished, adjusted and decorated itself. Today it often refers loosely to any supplier movement.
- "Based on": a movement built on a supplier's base, modified with the brand's own parts or features.
Watch writers have noted there is no single agreed definition, which is exactly why the terms cause confusion.
The spectrum
|
Level |
What it means |
Examples |
|---|---|---|
|
Supplier movement |
Bought from a movement maker and used largely as delivered |
Seiko NH35, Miyota 9015, Sellita SW200-1, ETA 2824-2 |
|
Modified supplier movement |
A supplier base with the brand's own modules, regulation or decoration, often under its own caliber name |
Many "Calibre" names built on Sellita or ETA bases |
|
Exclusive group movement |
Made by a sister company for one brand or group only |
The Swatch Group's Powermatic 80 for Tissot, Hamilton and others |
|
Partner-made proprietary movement |
Designed for the brand and made by a company it founded or partly owns |
Tudor's movements, made by Kenissi |
|
Vertically integrated |
Designed and made almost entirely by the brand |
Rolex, Seiko, Citizen, Grand Seiko |
Even at the top, few companies make every part. Hairsprings in particular come from a handful of specialists, and many brands celebrated for their manufacture movements buy them in.
Why the term became so important
For decades, most Swiss watch brands used movements from ETA, the Swatch Group's movement maker, which at its peak supplied a large majority of the Swiss industry. In 2002, the Swatch Group announced it would stop supplying other brands. After years of review by COMCO, Switzerland's competition authority, the two sides agreed in 2013 to a gradual reduction in deliveries to outside brands through the end of 2019, later extended by a year. Today, ETA mainly supplies Swatch Group brands.
The industry adapted in two ways:
- Alternative suppliers grew. Sellita, whose SW200 is closely based on the ETA 2824 design, became the largest maker of mechanical movements for outside brands; the Swatch Group said Sellita supplied about a million mechanical movements in 2019.
- Brands built their own. Breitling introduced its Caliber 01 in 2009. Tudor introduced its first manufacture caliber, the MT5621, in 2015, and in 2016 founded Kenissi to make its movements and supply other brands. Oris launched its Calibre 400 in 2020, with a five-day power reserve and a ten-year warranty.
Along the way, "in-house" became a marketing badge, and its meaning stretched.
What an in-house movement can offer
- Distinctive engineering. A brand can design exactly what it wants: a longer power reserve, better magnetic resistance, a particular layout or complication.
- Control. A brand that makes its own movements isn't exposed to a supplier's decisions about price and supply.
- Craft and heritage. For many collectors, a watch whose movement was conceived by the same company has a coherence they value.
- Sometimes, longer warranties. A brand confident in its own movement may back it for longer, as Oris does with the Calibre 400.
What it can cost you
- Price. Developing and tooling a movement is expensive, and that cost is passed on.
- Servicing. Parts for an in-house movement usually come only from the brand. That can mean higher service costs, sending the watch back to the brand, and, decades from now, depending on the brand's continued support.
- Teething problems. A brand-new movement hasn't had decades of refinement. Some first generations need updates.
- No guarantee of quality. As one watch writer put it, "in-house" says little about the level of craft or ingenuity in a caliber.
The case for proven supplier movements
Movements like the ETA 2824-2, Sellita SW200-1, Seiko NH35 and Miyota 9015 have been produced in the millions and refined over decades. Almost any watchmaker can service them, parts are plentiful and inexpensive, and their strengths and weaknesses are well known. For an everyday watch at a sensible price, they're often the most practical choice. See The movements you'll find in most affordable watches.
Japan and China do it differently
In Japan, the big makers have long been vertically integrated. Seiko and Citizen make their own movements, often down to their own hairsprings and alloys, and sell movements to other brands through their movement divisions; Citizen's is Miyota. Large Chinese makers are similarly integrated. So for Japanese and Chinese movements, "in-house" is less a badge of prestige than a description of how the industry works. See Japanese watch movements and Chinese watch movements.
Questions to ask about any "in-house" claim
- Who designed the movement?
- Who makes its main parts, and who assembles it?
- Is it based on a supplier's design?
- Can an independent watchmaker service it, and are parts available?
- What are the warranty and the recommended service interval?
A brand proud of its movement will answer all five plainly.
Does it matter?
For most buyers, the movement's quality, accuracy, reliability and serviceability matter far more than where it was designed. An excellent supplier movement beats a mediocre in-house one. In-house becomes worth paying for when the movement does something you value that others don't, when you care about the brand's watchmaking heritage, or when it comes with strong performance guarantees.
How this applies to Vardesso
Every Vardesso product page names the maker and caliber of the movement inside. We describe a movement as in-house only if we designed and built it ourselves, and where a movement comes from an established maker, we say so plainly, along with what it means for accuracy and servicing.
Frequently asked questions
What is an in-house movement? One a watch brand designs and makes itself, though the term is used loosely.
Is "manufacture" the same as "in-house"? Usually, yes. Swiss brands often use "manufacture caliber" for movements they make themselves.
Are in-house movements better? Not automatically. They can be more distinctive, but proven supplier movements are often just as accurate and easier to service.
Why are in-house watches more expensive? Developing and producing a movement is costly, and that cost is reflected in the price.
Can any watchmaker service an in-house movement? Not always. Parts may only be available from the brand.
What is an ébauche? Historically, a movement blank or kit that a brand finished itself; today it often means any supplier movement.
Keep reading
- The movements you'll find in most affordable watches
- Swiss watch movements
- "Generic" and "clone" movements
- Movement origin vs assembly
- Movement decoration
Sources
- Fratello: what is an in-house movement?
- Deployant: in-house and everything in between
- Monochrome: COMCO and ETA's obligation to supply movements
- Europa Star: COMCO's 2013 agreement with the Swatch Group
- WatchPro: Sellita and the ETA supply ruling
- Time+Tide: are Tudor's movements in-house?
- Monochrome: the Oris Calibre 400
- Breitling: Made by Breitling