A mecha-quartz chronograph is a hybrid watch movement. A quartz movement keeps the time, while the stopwatch function, the chronograph, runs through a mechanical module of levers, wheels, cams and a reset hammer like those in a traditional mechanical chronograph. The result is a battery-powered watch whose chronograph hand sweeps, whose pushers click crisply and whose hands snap back to zero in an instant, with quartz accuracy, a slimmer case and a far lower price than an automatic chronograph. You will also see it spelled meca-quartz, mechaquartz and mecaquartz. They all mean the same thing.
First, what is a chronograph?
A chronograph is a watch with a built-in stopwatch. Alongside the normal hours and minutes, it can time an event, such as a lap, a parking meter or a pot of rice, without disturbing the time of day.
From the outside, most chronographs work the same way:
- The top pusher, at 2 o'clock, starts and stops the timing.
- The bottom pusher, at 4 o'clock, resets the chronograph hands to zero.
- A large central hand counts elapsed seconds once you press start. When the chronograph is off, it rests at 12.
- Small subdials count elapsed minutes and, on some watches, hours. Another subdial usually shows the running seconds of the ordinary time.
Don't confuse a chronograph with a chronometer. A chronograph is a stopwatch function; a chronometer is a watch certified for accuracy. A watch can be one, both or neither.
Three ways to build a chronograph
There are three main ways to build a chronograph, and the mecha-quartz makes the most sense when you see it next to the other two.
The mechanical chronograph
In a traditional mechanical chronograph, the mainspring powers everything. The chronograph is a second gear train that connects to the running watch through a clutch. Press start, and the clutch couples the chronograph to the movement. Press stop, and a brake holds it still. Press reset, and hammers strike heart-shaped cams that snap each hand back to zero. A column wheel or a system of cams and levers choreographs every step.
Because it is driven by the balance wheel, the chronograph seconds hand sweeps in small steps, typically six or eight times a second in a modern movement. The pushers have a firm, mechanical feel. The Valjoux 7750, used by many brands, is the best-known example.
Mechanical chronographs are among the most complex movements made in quantity. That makes them thicker, heavier and more expensive than simple automatics, and they need periodic servicing. See What is an automatic watch? and Hand-wound mechanical watches.
The full quartz chronograph
In an ordinary quartz chronograph, everything is electronic. A quartz crystal keeps time, small stepping motors drive the hands, often one motor for each chronograph hand, and the pushers press electrical switches.
That makes quartz chronographs accurate, slim and inexpensive, but they behave differently. In most, the central chronograph hand advances in one-second jumps, though some designs move faster. When you press reset, the hands usually run back to zero under motor power instead of snapping back, and the pushers often feel soft. Swiss makers Ronda and ETA and Japan's Miyota produce many of these movements. Ronda's 5040.D, for example, is found in quartz chronographs from TAG Heuer and many other brands.
The mecha-quartz chronograph
A mecha-quartz chronograph takes something from each. The time is kept by quartz, exactly as in any quartz watch. The chronograph, however, is a mechanical module with parts borrowed from mechanical chronographs: levers that start and stop the timing, wheels that carry the chronograph hands, heart-shaped cams and a hammer that resets them. Instead of a mainspring, the battery and a small motor supply the power.
Whenever you use the stopwatch, the result looks and feels much like a mechanical chronograph:
- The chronograph seconds hand sweeps in fifths of a second, five small steps every second. That is the same rhythm as many classic mechanical chronographs that beat at 18,000 vibrations an hour.
- The pushers click with the crisp, positive action of real levers.
- The reset is instant. The hands fly back to zero the moment you press the button.
The running seconds, in the small subdial, still tick once a second like any quartz watch. Only the chronograph hand sweeps.
How a mecha-quartz chronograph works, step by step
- At rest. The quartz section runs the hours, minutes and small seconds, plus the date and 24-hour hand if the watch has them. The chronograph hands wait at zero.
- Start. Pressing the top pusher moves levers inside the movement that release the chronograph and switch on its drive. The central hand begins to sweep, and the minute counter advances as each minute passes.
- Stop. Pressing the top pusher again halts the chronograph hands so you can read the elapsed time. Press start again to keep adding to the same measurement.
- Reset. Pressing the bottom pusher drops a hammer onto heart-shaped cams fixed to the chronograph wheels. Wherever each hand happens to be, the cam forces it back to zero, and all the hands return in a fraction of a second.
Why a heart-shaped cam?
The heart cam is one of watchmaking's cleverest small inventions. Its edge is shaped so that its distance from the center grows steadily in both directions away from one low point. When the flat face of the hammer presses against it, the cam turns until that low point faces the hammer, the only position in which it can rest. Watchmakers line that point up with zero. That is why a mechanical reset is instant and always lands in the same place, in a mecha-quartz movement just as in a fine mechanical chronograph.
A short history of mecha-quartz
Seiko's quartz chronograph, 1983
Seiko introduced the world's first quartz wristwatch, the Astron, in 1969. In 1983 it introduced the 7A28, generally recognized as the first analog quartz chronograph movement. Its chronograph was driven electronically rather than through a mechanical module, but it was unusually well built: an all-metal, 15-jewel movement that watchmakers could regulate and service. It set the stage for quartz chronographs that felt like serious instruments.
Jaeger-LeCoultre and Frédéric Piguet, 1987
The first mecha-quartz movement is credited to Jaeger-LeCoultre, working with movement maker Frédéric Piguet. Jaeger-LeCoultre's Calibre 630, introduced in 1987, paired a quartz timekeeping section with a mechanical chronograph. It was a refined movement with 25 jewels, and thin enough for elegant cases: Jaeger-LeCoultre's Master Control chronograph from the late 1990s measured about 34 mm across and about 8 mm thick. IWC used the movement too.
These Swiss hybrids let respected houses offer slim, accurate chronographs during the years when quartz dominated the market. They were discontinued long ago, and today they turn up only on the vintage market.
Seiko brings it to everyone
Seiko made mecha-quartz chronographs widely available, both in Seiko-branded watches and through its VK family of movements, which it supplies to other watch brands. Seiko describes the VK calibers as using a three-pointed reset hammer of the kind once found only in its mechanical movements. Today, most mecha-quartz chronographs on the market use a Seiko movement, from microbrand racing chronographs to heritage revivals. Autodromo, Brew, Dan Henry, Nivada Grenchen and Yema are among the brands that have built chronographs around VK calibers. Seiko's own Caliber 8T63, introduced in 2015, is a Seiko-only movement closely related to the VK63.
The Seiko VK family at a glance
|
Caliber |
Layout |
Longest measurement |
|---|---|---|
|
VK63 |
60-minute counter at 9, small seconds at 6, 24-hour hand at 3, date |
60 minutes |
|
VK64 |
Two subdials; no 24-hour hand and no date |
|
|
VK67 |
60-minute counter at 12, 12-hour counter at 9, small seconds at 6 |
12 hours |
|
VK68 |
60-minute counter at 10, small seconds at 6, 24-hour hand at 2, date |
60 minutes |
|
VK83 |
20-minute counter at 9, small seconds at 6, 24-hour hand at 3 |
20 minutes |
What they share:
- A standard 32,768 Hz quartz crystal for the time.
- A chronograph seconds hand that moves in fifths of a second.
- Rated accuracy of about ±20 seconds a month. Seiko rates its 8T63 at ±15 seconds a month.
- Battery life of about three years, less if you run the chronograph a lot.
- An automatic stop when the chronograph reaches its longest measurement, which saves power.
Advantages of mecha-quartz
- The mechanical chronograph experience. The sweep of the chronograph hand, the click of the pushers and the instant snap to zero are the parts of a chronograph people enjoy most.
- Quartz accuracy. About ±15 to ±20 seconds a month, where many automatics drift that much in a day or two.
- A slimmer, lighter watch. There is no rotor or mainspring. Seiko's 8T63 is about 5.1 mm thick; the Valjoux 7750 automatic chronograph is about 7.9 mm thick before the dial, hands and case are added.
- Grab and go. No winding, and it keeps running in a drawer.
- Value. A mecha-quartz chronograph costs a fraction of an automatic chronograph, which is why so many independent brands use them.
- Lower upkeep. No regular mechanical overhaul, just a battery every few years.
Drawbacks to know about
- It's still a battery watch. If mechanical craft is what you want, a mecha-quartz won't satisfy that, however good the pushers feel.
- Only the chronograph hand sweeps. The running seconds tick once a second, like any quartz watch.
- Battery changes need care. After a new battery, the chronograph hands may not sit exactly at zero. Seiko's manuals describe a reset procedure using the pushers and crown, but because the hands are reset mechanically, a larger misalignment can mean a watchmaker has to reposition the hands. Use a watchmaker who knows the movement.
- Repairs often mean replacement. Because the movements are affordable, a watchmaker will often fit a new movement rather than overhaul the old one. That is usually quick and inexpensive.
- Timing limits. The VK63, for example, stops its chronograph after 60 minutes.
- Perception. Some collectors see mecha-quartz as a compromise; many others value it as an honest, practical design.
Mecha-quartz vs quartz vs automatic chronographs
|
|
Mecha-quartz |
Full quartz |
Automatic |
|---|---|---|---|
|
Timekeeping |
Quartz |
Quartz |
Balance wheel and mainspring |
|
Chronograph driven by |
A battery-powered motor through a mechanical module |
Electric motors |
The mainspring, through a clutch |
|
Chronograph seconds hand |
Sweeps, 5 steps a second |
Usually jumps once a second |
Sweeps, typically 6 to 8 steps a second |
|
Running seconds |
Ticks once a second |
Ticks once a second |
Sweeps |
|
Reset |
Instant, mechanical |
Hands usually run back under motor power |
Instant, mechanical |
|
Pusher feel |
Crisp, mechanical |
Often soft |
Firm, mechanical |
|
Typical accuracy |
About ±15 to ±20 seconds a month |
About ±15 seconds a month |
About ±5 to ±20 seconds a day |
|
Thickness |
Slim |
Slimmest |
Thickest |
|
Upkeep |
Battery about every 3 years |
Battery every 2 to 5 years |
Service every 5 to 10 years |
|
Cost |
Low to moderate |
Lowest |
Highest |
Which should you choose?
- Choose mecha-quartz if you want the look and feel of a classic chronograph at a sensible price, without winding or servicing.
- Choose a full quartz chronograph if you want the lowest price, the slimmest case, or electronic features such as tenth-of-a-second timing.
- Choose an automatic chronograph if mechanical craft and heritage are the point, and you're happy to pay more and service it.
For the bigger picture, see Quartz vs automatic vs mechanical: the complete guide.
How to tell whether a chronograph is mecha-quartz
- Look for the caliber. Product pages and manuals usually name it. VK63, VK64, VK67, VK68 and VK83 are mecha-quartz, as are some Seiko-only 8T calibers.
- Watch the running seconds with the chronograph off. If the small seconds hand ticks once a second, the watch is quartz or mecha-quartz. If it sweeps, it is mechanical.
- Start the chronograph. A central hand that sweeps in quick small steps points to mecha-quartz or mechanical; one that jumps once a second points to ordinary quartz.
- Press reset. An instant snap to zero means a mechanical reset; hands that run back point to ordinary quartz.
A ticking running seconds hand, a sweeping chronograph hand and an instant reset together mean mecha-quartz.
Using and caring for a mecha-quartz chronograph
- Add times together by pressing start and stop repeatedly; reset when you're done.
- Pressing reset while timing does no harm on Seiko's VK calibers, according to Seiko's manual, though it's a good habit to stop first.
- Don't press the pushers underwater unless the watch is specifically designed for it.
- Don't leave the chronograph running for hours as a habit. It uses more power and shortens battery life.
- Check zero after a battery change. If the hands don't return exactly to zero, follow the reset procedure in the manual or ask the watchmaker.
- Have the water resistance checked whenever the case is opened.
How this applies to Vardesso
Where a Vardesso chronograph uses a mecha-quartz movement, its product page names the caliber, its counters, and its rated accuracy and battery life, so you know exactly how it will behave. If you want the feel of a classic racing chronograph without the cost and upkeep of an automatic, mecha-quartz is worth a close look.
Frequently asked questions
Is a mecha-quartz watch mechanical? Partly. The chronograph module is mechanical, but the watch runs on a battery and keeps time with quartz, so it is a quartz watch.
Is there a difference between meca-quartz, mecha-quartz and mechaquartz? No. They are different spellings of the same thing.
Does a mecha-quartz chronograph need winding? No. A battery powers it.
How accurate is a mecha-quartz chronograph? Seiko's VK calibers are rated at about ±20 seconds a month, and its 8T63 at ±15.
Why does the small seconds hand tick while the chronograph hand sweeps? The running seconds are driven by the quartz section in ordinary one-second steps; only the chronograph moves in fifths of a second.
How long does the battery last? About three years for the VK family, less with heavy chronograph use.
Can a mecha-quartz movement be serviced? Yes, but because replacement movements are affordable, watchmakers often replace them instead of overhauling them.
Is a mecha-quartz chronograph a good first chronograph? For many people, yes. It delivers the satisfying parts of a chronograph with quartz convenience and a modest price.
Keep reading
- Quartz vs automatic vs mechanical: the complete guide
- What is a quartz movement, and how does it work?
- What is an automatic watch?
- High-accuracy and thermocompensated quartz
Sources
- Teddy Baldassarre: MechaQuartz, the hybrid chronograph movement explained
- Caliber Corner: what is a meca-quartz movement?
- Caliber Corner: Seiko Caliber 8T63
- Seiko (TMI): VK63 and VK67 operation manual
- Watch.co.uk: Seiko VK63 movement specifications
- Watch-Wiki: Jaeger-LeCoultre Calibre 630
- Hairspring: Jaeger-LeCoultre Master Control 145.8.31
- aBlogtoWatch: Seiko 7A28, the first analog quartz chronograph movement
- Caliber Corner: Ronda Caliber 5040.D