A self-setting watch is a quartz watch that regularly corrects itself against time kept by atomic clocks. A radio-controlled watch, often sold as an atomic watch, picks up a long-wave radio time signal from a government station, usually overnight. A GPS watch picks up time from navigation satellites, anywhere it can see the open sky, and many can work out which time zone you're in. Between corrections, both run like ordinary quartz watches. After each correction, they're right to within a fraction of a second.
Why they're called atomic watches
An atomic watch doesn't contain an atomic clock. It receives its time from one. In the United States, the radio station WWVB broadcasts time from NIST, the National Institute of Standards and Technology. That time is the average of a group of master atomic clocks, which are themselves calibrated by NIST's cesium fountain clocks, some of the most accurate instruments ever built. GPS satellites carry atomic clocks of their own.
So the watch's own quartz movement is ordinary. What makes it exceptional is that it is regularly reset to an extraordinary reference.
How radio-controlled watches work
- A station broadcasts the time. National laboratories transmit the official time as a slow digital code on long-wave radio. In the United States, WWVB broadcasts on 60 kHz from near Fort Collins, Colorado, 24 hours a day, 7 days a week.
- The watch listens, usually at night. A tiny antenna and receiver chip inside the watch wake up at set times, typically in the early morning hours. Many watches try several times a night and stop once they succeed. Because the code is sent slowly, at about one piece of information a second with a complete time message each minute, a successful reception usually takes a few minutes.
- It decodes the time and applies your time zone. The signal carries the official time and date. You tell the watch your home time zone once, and it does the rest. WWVB's signal also tells receivers whether daylight saving time is in effect, so a watch set to change automatically will switch for you.
- It corrects the hands. The watch moves its hands, or updates its display, to the exact time.
- Between signals, it's an ordinary quartz watch. If it can't receive a signal for a while, it simply carries on at normal quartz accuracy.
Why at night? There is less electrical interference, and long-wave radio signals travel farther after dark.
The world's time-signal stations
|
Station |
Country |
Location |
Frequency |
Operated by |
|---|---|---|---|---|
|
WWVB |
United States |
Near Fort Collins, Colorado |
60 kHz |
NIST |
|
DCF77 |
Germany |
Mainflingen, near Frankfurt |
77.5 kHz |
PTB |
|
MSF |
United Kingdom |
Anthorn, northern England |
60 kHz |
NPL |
|
JJY |
Japan |
Mount Otakadoya, Fukushima |
40 kHz |
NICT |
|
JJY |
Japan |
Mount Hagane, Kyushu |
60 kHz |
NICT |
|
BPC |
China |
Shangqiu, Henan Province |
68.5 kHz |
NTSC |
A few things to know:
- Range. Seiko's manuals give approximate reception ranges of about 1,500 km for WWVB and BPC and about 1,000 km for DCF77 and each JJY transmitter, while noting that watches may pick up signals farther away when conditions are good. In practice, WWVB serves most of the mainland United States.
- The 60 kHz stations aren't interchangeable. Each station uses its own code, so a watch built only for WWVB can't read MSF.
- Multi-band watches. Watches sold as multi-band can receive several stations. Casio's Multi-Band 6 receives all six transmitters; its earlier Multi-Band 5 couldn't receive China's BPC.
- Gaps. Large parts of the world, including most of South America, Africa, South Asia and Australia, have no station that a consumer watch can receive. There, a radio-controlled watch is simply a quartz watch.
A short history
- 1956. The station that became WWVB begins broadcasting.
- 1985. Junghans introduces the first radio-controlled table clock.
- 1990. Junghans releases the Mega 1, the first radio-controlled wristwatch. It was digital, received Germany's DCF77, and carried its antenna in the strap.
- 1991. Junghans introduces the Mega, the first radio-controlled wristwatch with hands.
- 1993. Junghans releases the first solar-powered radio-controlled wristwatch.
- 2008. Casio introduces Multi-Band 6, receiving all six transmitters.
- 2011. Citizen's Eco-Drive Satellite Wave becomes the first light-powered watch to set itself from GPS satellites.
- 2012. Seiko launches the Astron GPS Solar, the first GPS solar watch to also identify your time zone, recognizing all 39 of the world's time zones. The same year, WWVB adds a new layer to its signal; existing watches keep working as before.
- 2015. Citizen adds position data to its Satellite Wave GPS watches and achieves time reception in as little as three seconds.
- 2018 and 2019. A proposed federal budget would have shut down WWVB and NIST's two shortwave time stations. The final 2019 budget preserved them.
How GPS watches work
GPS satellites orbit about 20,000 km above the Earth. Each carries atomic clocks and continuously broadcasts precise time along with information about its position. A GPS watch has a small antenna tuned to those signals.
- Time updates. To set the time, the watch only needs to hear from the satellites briefly. Citizen's fastest models do it in as little as three seconds.
- Time-zone updates. To find your time zone, the watch works out where it is using several satellites, at least four in Seiko's design, then looks up that location on a time-zone map stored in the watch. Citizen says its watches can capture position data in as little as 30 seconds. Coverage of the world's time zones varies by model.
- Leap seconds. GPS keeps its own continuous time scale that doesn't add leap seconds; the satellites broadcast the current difference from official world time, and the watch applies it. International timekeeping authorities have since agreed to stop adding leap seconds by 2035.
- Daylight saving time. GPS doesn't broadcast local daylight saving rules. Watches use rules stored in the watch, or a daylight saving setting you switch on and off. If a government changes its rules, check that setting.
- When it updates. Some models try automatically when they sense bright outdoor light; others update on a schedule or when you press a button. Indoors, GPS reception generally isn't possible.
- Power. Receiving GPS takes more energy than receiving radio time signals, which is why nearly all GPS watches are solar powered. See Solar-powered watches explained.
- Between updates. The watch runs as a quartz watch. Citizen rates its Satellite Wave GPS models at ±5 seconds a month.
A GPS time-setting watch only receives signals. It doesn't transmit your location anywhere.
Hybrids and phone-synced watches
- Radio and GPS together. Some watches use both: radio signals at home, satellites while traveling. Casio's G-Shock GPW-1000 was the first watch able to receive both.
- Bluetooth sync. Some analog and digital watches connect to a phone app and take the time from the phone, which gets it from the mobile network or the internet. They work almost anywhere you have your phone, and the app can also handle time zones and settings.
- Smartwatches are always synchronized, but they need charging every day or two.
Radio vs GPS vs high-accuracy quartz
|
|
Radio-controlled |
GPS |
High-accuracy quartz |
|---|---|---|---|
|
Time source |
A government radio station |
Satellites |
Its own temperature-corrected crystal |
|
Where it works |
Within range of a station |
Anywhere with open sky |
Anywhere |
|
How often it corrects |
Usually nightly |
When outdoors, automatically or at a button press |
Never; it relies on its own accuracy |
|
Time zones |
You set them |
Can detect your time zone |
You set them |
|
Daylight saving time |
Automatic where the signal carries it |
Stored rules or a manual setting |
Manual |
|
Works indoors |
Yes, near a window |
No |
Yes |
|
Power use |
Low |
Higher; usually solar |
Low |
|
Best for |
People who want always-right time at home |
International travelers |
Anyone who wants independence from signals |
For more on watches that hold time on their own, see High-accuracy and thermocompensated quartz.
Getting good reception from a radio-controlled watch
- Leave it by a window overnight, ideally on the side of the house facing the transmitter. In the United States, that means toward Colorado.
- Keep it away from electronics and metal: televisions, computers, phones, appliances, fluorescent lights, and metal desks or window frames.
- Avoid shielded spots, such as basements, the interiors of large steel and concrete buildings, cars and trains.
- Keep it still. Reception works best with the watch off your wrist and resting.
- Use manual reception if you need to, but expect better results at night.
- Check the reception indicator. Most watches show whether the last attempt succeeded.
- Be patient with the weather and terrain. Even within range, storms, mountains and buildings can block a signal. NIST also occasionally takes WWVB off the air for maintenance and posts outages on its website.
Getting good reception from a GPS watch
- Go outside with a clear view of the sky, away from tall buildings, trees and tunnels.
- Keep the dial facing up and hold still until the update finishes.
- Update after you land when you travel to a new time zone.
- Use flight mode if your watch has one and the airline requires it.
If the hands look wrong
If a watch receives successfully but shows the wrong time, check three things. First, the home city or time zone. Second, the daylight saving setting. Third, the hand alignment: a hard knock or a strong magnet can push the hands out of position, so the watch knows the right time but displays it wrongly. Most analog self-setting watches have a reference-position check in the manual, and some correct their hands automatically.
Advantages and drawbacks
Advantages
- Always right. No setting the watch, ever, in normal use.
- Automatic daylight saving changes, for radio watches where the signal carries them.
- Effortless travel, for GPS watches that detect your time zone.
- Leap years and calendar quirks handled for you on most models with a calendar.
Drawbacks
- Radio watches depend on a nearby station and don't work in much of the world.
- They depend on public infrastructure. The 2019 budget proposal was a reminder that time stations need continued funding.
- GPS needs an open sky and more power, and GPS watches tend to be larger and more expensive.
- More settings to learn. It's worth keeping the manual.
- They're instruments, not heirlooms. If mechanical craft is what draws you to watches, a self-setting watch serves a different purpose.
Buying tips
- Match the watch to where you live and travel. In the United States, choose a watch that receives WWVB. In Europe, DCF77 and MSF. If you travel internationally, choose a multi-band radio watch or GPS.
- Choose solar power so you never have to think about batteries.
- Look for automatic daylight saving time and automatic hand-position correction.
- Check for a reception indicator and a manual receive option.
- For GPS, check whether the watch detects your time zone or only sets the time.
- Try it on. GPS models in particular can be large.
How this applies to Vardesso
Where a Vardesso model sets itself by radio or GPS, its product page says which signals it receives, where they work, and how it is powered. If you want a watch that is always right without ever touching the crown, those models are the place to start.
Frequently asked questions
Do atomic watches contain an atomic clock? No. They receive time from atomic clocks by radio.
Will a radio-controlled watch bought in the US work in Europe? Only if it is a multi-band watch that receives the European stations.
How often does a radio-controlled watch set itself? Usually once a night, when it can receive a signal.
Why didn't my watch receive the signal? It may be too far from the station, near interference, inside a shielded building, or the station may have been briefly off the air. Try a window at night.
Do GPS watches track my location? A GPS time-setting watch uses satellite signals to work out its position and time zone, but it only receives signals. It doesn't send your location anywhere.
Do radio-controlled watches change for daylight saving time automatically? Usually, where the station's signal includes it and the watch is set to automatic.
What happens if a time station stops broadcasting? The watch keeps running as an ordinary quartz watch. You would set it by hand.
How accurate are GPS watches between updates? Like good quartz watches. Citizen rates its Satellite Wave GPS models at ±5 seconds a month.
Keep reading
- What is a quartz movement, and how does it work?
- High-accuracy and thermocompensated quartz
- Solar-powered watches explained
- Quartz vs automatic vs mechanical: the complete guide
Sources
- NIST: Radio Station WWVB
- NIST: WWVB station outages
- Wikipedia: WWVB
- Radio World: why WWV and WWVH still matter
- Wikipedia: Junghans Mega
- Europa Star: Junghans, Germany's industrial champion
- Seiko: radio signal reception ranges (owner's manual)
- Casio: G-Shock GW-5000U time calibration signals
- Wikipedia: Casio Wave Ceptor
- Citizen: Satellite Wave GPS
- Seiko Museum: Astron GPS Solar
- Europa Star: the Japanese race for absolute precision
- University of Cambridge: low-frequency radio time signals