A Swiss movement is one developed and assembled in Switzerland, inspected there by its maker, with at least 60 percent of its manufacturing costs incurred in the country. Most mid-priced Swiss watches use movements from two large suppliers, ETA and Sellita, while the most expensive houses make their own. "Swiss" guarantees a legal minimum of Swiss work. It does not guarantee a particular grade, finish or level of accuracy.
How Switzerland became the home of watchmaking
The story usually starts in Geneva in the 1500s. Under John Calvin's influence, the city's laws against ostentatious jewelry pushed its goldsmiths and enamelers toward watchmaking, and Protestant refugees from France brought watchmaking skills with them. By 1601 Geneva had a watchmakers' guild, the first of its kind. Over the next two centuries the craft spread into the Jura mountains, where families made parts in small workshops and specialists assembled them into finished watches.
That cottage system met a shock in 1876. At the Centennial Exhibition in Philadelphia, Swiss visitors saw American factories turning out accurate, machine-made watches with interchangeable parts. Jacques David, an engineer who later led Longines, toured the American factories and wrote a long report warning that Swiss watchmaking would be destroyed unless it industrialized. The Swiss listened, mechanized, and went on to dominate the 20th century.
The next shock came from Japan. In December 1969, Seiko released the Astron, the first quartz wristwatch. Through the 1970s and early 1980s, cheap and accurate quartz watches flooded the market. By one estimate the number of Swiss watch companies fell from more than 1,600 in 1970 to fewer than 600 by the mid-1980s, and employment fell from 90,000 to about 33,000. The two largest Swiss groups merged in 1983 into what became the Swatch Group, and the inexpensive plastic Swatch helped bring the industry back.
Today Switzerland exports far fewer watches than it once did, 14.6 million in 2025, but they were worth 24.4 billion Swiss francs. Most of those watches are quartz. Most of the money comes from mechanical ones.
Who makes Swiss movements
|
Maker |
Based in |
Known for |
|---|---|---|
|
ETA |
Grenchen |
Owned by the Swatch Group. The 2824-2 automatic, the 2892, and the Valjoux 7750 chronograph |
|
Sellita |
La Chaux-de-Fonds |
Privately owned. The SW200-1 automatic and the SW500 chronograph family |
|
Ronda |
Lausen |
Mostly quartz movements for brands at many price levels |
|
La Joux-Perret |
La Chaux-de-Fonds |
Owned by Japan's Citizen since 2012. Automatics, chronographs and tourbillons |
|
Kenissi |
Le Locle |
Founded in 2016 alongside Tudor. Automatics with long power reserves, now supplied to other brands too |
Above these suppliers sit the houses that design and build their own movements, such as Rolex, Omega, Patek Philippe, Audemars Piguet, Vacheron Constantin and Jaeger-LeCoultre. A movement made by the brand itself is called "in-house." It usually costs more, but it is not automatically better than a well-made supplier movement.
The ETA story, and why Sellita matters
ETA began in the 1930s as the movement-making arm of Eterna and grew, through mergers, into the backbone of the Swiss industry. By the 2000s, a large share of Swiss mechanical watches, including many from brands outside the Swatch Group, ran on ETA movements or parts.
In 2002, ETA announced that it would cut supplies to outside brands. The dispute went to Swiss competition regulators, and in 2013 they agreed to let ETA reduce deliveries step by step through 2019. In 2020 the regulator lifted the remaining restrictions, finding that enough competition now existed.
The main reason it existed was Sellita. Founded in 1950 by Pierre Grandjean, Sellita spent decades assembling movements for ETA. When the 2824-2's patents expired, Sellita began making its own version, the SW200-1, with the same dimensions and specifications and one extra jewel. By 2019, according to the Swatch Group, Sellita was producing about a million mechanical movements a year and had become the larger supplier. Other makers, in Switzerland and abroad, also built 2824-style movements, which is why you will hear the word "clone" used without any suggestion of a fake. See "Generic" and "clone" movements.
What "Swiss" guarantees, and what it doesn't
Under Swiss law, a movement counts as Swiss if:
- its technical development happens in Switzerland
- it is assembled in Switzerland and inspected there by its maker
- at least 60 percent of its manufacturing costs are incurred in Switzerland
- Swiss parts make up at least half the value of all its parts, not counting assembly
A watch that contains such a movement may say "Swiss movement," with the word "movement" spelled out in the same lettering as "Swiss." To say "Swiss Made," the whole watch must also be cased and given its final inspection in Switzerland, with at least 60 percent of its total manufacturing costs incurred there. The details are in What "Swiss Made" legally means.
What the label does not tell you: which grade of movement you have, how carefully it was regulated, how well it was finished, or where the other 40 percent of the cost was spent.
How to tell what's inside a Swiss watch
- Read the specifications. Good brands name the movement. Many give a supplier movement their own name, so look for "based on" in the specs.
- Look through the caseback. If the back is clear, the rotor often shows the jewel count. An ETA 2824-2 has 25 jewels and a Sellita SW200-1 has 26.
- Ask. A brand that will not tell you which movement is inside is telling you something else.
How this applies to Vardesso
Some Vardesso models use Swiss movements. Because Vardesso watches are assembled in China, they are not Swiss Made, and we never call them that. On those models the product page says "Swiss movement" and names the exact movement, so you know precisely what you are buying.
Frequently asked questions
Is ETA better than Sellita? At the same grade, the ETA 2824-2 and the Sellita SW200-1 perform essentially the same. Both beat at 28,800 vibrations per hour, both offer roughly 38 to 41 hours of power reserve, and most watchmakers service both.
What does "in-house" mean? It means the brand designed and builds the movement itself rather than buying it from a supplier. It signals investment and control, not automatically better timekeeping.
Why do so many Swiss watches share the same movement? Because a proven, widely serviced movement is cheaper and more reliable than designing a new one. Brands set themselves apart through the case, dial, finishing and regulation.
Can a watch with a Swiss movement be made outside Switzerland? Yes. It can be described as having a "Swiss movement," but it cannot be called Swiss Made.
Keep reading
- What "Swiss Made" legally means
- Swiss vs Japanese vs Chinese vs German movements
- "Generic" and "clone" movements: what the terms mean
- The movements you'll find in most affordable watches
Sources
- Federation of the Swiss Watch Industry: from the origins to the present day
- Federation of the Swiss Watch Industry: Swiss watch exports in 2025
- Ordinance on the Use of "Switzerland" or "Swiss" for Watches (English translation)
- Seiko Museum: the quartz revolution
- Richard Watkins: Jacques David's 1876 report
- Worn & Wound: a history of ETA
- Monochrome Watches: ETA free to supply movements again
- Fratello: inside Sellita
- Europa Star: La Joux-Perret under Citizen