Jewels are tiny synthetic rubies used as bearings in a mechanical watch. They sit at the points of greatest friction and wear, where steel pivots turn or where parts strike each other thousands of times an hour, because ruby is far harder and smoother than metal. A basic hand-wound watch needs 17 jewels to be considered fully jeweled; automatic movements usually have 21 to 25 or more. The jewels aren't valuable gemstones, and beyond the ones a movement needs, a higher count doesn't mean a better watch.
Why watches use jewels at all
A mechanical movement is full of tiny axles, called pivots, spinning in holes in the plates and bridges. Some turn constantly; the balance swings back and forth hundreds of thousands of times a day. Steel pivots running in brass holes would gradually wear oval, friction would rise, and timekeeping would suffer.
Ruby solves the problem. It is a form of corundum, one of the hardest materials on earth, harder than any steel pivot. A polished ruby bearing gives:
- Low, consistent friction, so the movement delivers steady power to the balance.
- Very little wear, so the bearing keeps its shape for decades.
- A good home for oil. A jewel's shape helps hold a tiny drop of lubricant exactly where it's needed.
- No corrosion. Ruby doesn't rust or tarnish.
Real rubies, but not expensive ones
Watch jewels are genuine rubies in the chemical sense: aluminum oxide with a trace of chromium, which gives the red color. Pure corundum is actually clear. But since the early 1900s, they have been synthetic. In 1902, the French chemist Auguste Verneuil published his flame-fusion process for growing ruby crystals cheaply and in quantity, and watch jewels have been made that way ever since. A synthetic ruby is as hard and as pure as a natural one, often purer, and costs very little. A replacement jewel typically costs a few dollars; it's the skill of fitting it that a watchmaker charges for.
Types of jewels
- Hole jewels are doughnut-shaped bearings that hold a pivot. Good ones have a gently rounded inner surface and a small cup on one side to hold oil.
- Cap jewels, or endstones, are flat jewels that sit on top of a hole jewel, so the pivot's tip rests on ruby. They are used at the balance, and sometimes the escapement, to reduce friction when the watch lies flat.
- Pallet stones are the two jewels on the pallet fork that catch and release the escape wheel's teeth. See The escapement explained.
- The impulse jewel, or roller jewel, is a tiny jewel pin on the balance that works with the pallet fork.
- Shock-protected jewels at the balance are held in sprung settings so the delicate pivots survive a knock. See Shock protection.
In older and some high-end watches, jewels are set in gold rings called chatons, held in place with tiny screws. Today most jewels are pressed directly into the plates and bridges.
Where the 17 jewels go
A basic time-only mechanical movement is considered fully jeweled with 17 jewels, distributed like this:
|
Part |
Jewels |
What they do |
|---|---|---|
|
Balance |
5 |
Two hole jewels and two cap jewels for the staff's pivots, plus the impulse jewel |
|
Pallet fork |
4 |
Two hole jewels for its pivots, plus the two pallet stones |
|
Escape wheel |
2 |
Hole jewels for its pivots |
|
Fourth wheel |
2 |
Hole jewels for its pivots |
|
Third wheel |
2 |
Hole jewels for its pivots |
|
Center wheel |
2 |
Hole jewels for its pivots |
|
Total |
17 |
|
The barrel and the slow-moving parts on the dial side usually don't need jewels; their loads and speeds are low enough for metal bearings.
Why automatics have more
An automatic movement adds a rotor and a set of reversing wheels that are constantly in motion, and many movements add jewels for the calendar or extra cap jewels. That's where the extra jewels go. Some typical counts:
|
Movement |
Type |
Jewels |
|---|---|---|
|
Miyota 8215 |
Automatic |
21 |
|
Seiko NH35 |
Automatic |
24 |
|
Miyota 9015 |
Automatic |
24 |
|
ETA 2824-2 |
Automatic |
25 |
|
Sellita SW200-1 |
Automatic |
26 |
|
Valjoux 7750 |
Automatic chronograph |
25 |
|
Rolex calibre 7135 |
Automatic |
39 |
Chronographs, calendars and other complications add more again. A complicated watch can carry dozens.
The jewel-count wars
For two centuries, jewels were expensive, so a high jewel count genuinely signaled a better watch. When synthetic rubies made jewels cheap, the number on the dial kept its prestige. In the 1950s and 1960s, some brands added jewels that did nothing, simply to print a bigger number. Watches advertised 39, 41, even 100 jewels. Waltham's famous 100-jewel watch had its 17 functional jewels plus 83 more set around the rotor, where they served no purpose.
The industry eventually reined this in. Swiss industry standards began policing jewel claims in the 1960s, and in the 1970s the international standard ISO 1112 defined a functional jewel as one that genuinely reduces friction and wear. United States import rules also required imported movements to be marked with their jewel count. Today, reputable makers count only functional jewels.
Does the jewel count matter?
A little, but less than most people think.
- Below 17 in a mechanical watch usually means a very basic movement, often an inexpensive design that uses metal pins in place of some jewels.
- 17 to about 30 is normal for hand-wound and automatic three-hand watches. Within that range, the difference between 21, 24 and 25 jewels tells you about the design, not the quality.
- More than about 30 is normal for complications such as chronographs, but in a simple watch, ask what the extra jewels do.
What matters more than the count: how well the jewels are made and polished, how precisely they are fitted, and the quality of the movement around them. Two movements with the same jewel count can differ enormously in finish, accuracy and longevity.
Do quartz watches have jewels?
Some do, though they need far fewer because the motor and gears turn slowly and gently. Counts run from zero to a dozen or so. Seiko's 8T63 quartz chronograph has none; ETA's G10 quartz chronographs have four; Bulova's Precisionist movements have eight; and Swiss Made versions of Ronda's 5040 quartz chronograph have 13. In quartz, the jewel count matters even less than in a mechanical watch.
Caring for jewels
Jewels last a lifetime in normal use, but two things can affect them:
- Old oil. The oil in each jewel slowly dries and thickens. A service cleans every jewel and re-oils it, which is one reason mechanical watches need servicing every five to ten years.
- Hard knocks. A severe shock can crack a cap jewel or impulse jewel. A watchmaker can replace one quickly and inexpensively.
Why are they still called jewels?
Tradition. When watchmakers first drilled rubies for bearings in the early 1700s, jewels were precious, and the name stuck. The idea was introduced in 1704, when Nicolas Fatio de Duillier and the watchmaking brothers Peter and Jacob Debaufre received an English patent for jewel bearings.
How this applies to Vardesso
Where a Vardesso model uses a mechanical movement, its product page lists the jewel count as the movement maker specifies it, counting functional jewels only. If you can see the movement through an exhibition caseback, the small red dots in the bridges are those jewels.
Frequently asked questions
Are watch jewels real rubies? Yes, chemically, but they are synthetic, made in a laboratory, and inexpensive.
Do jewels add value to a watch? Only through what they do. Their material value is tiny.
How many jewels should a good watch have? 17 for a basic hand-wound watch; about 21 to 26 for a typical automatic; more for complications.
Is a 25-jewel watch better than a 21-jewel watch? Not necessarily. The difference usually reflects the design, not the quality.
What does "fully jeweled" mean? A movement with jewels at all 17 standard positions of a basic time-only watch.
Can jewels break? Rarely. A severe shock can crack one, and a watchmaker can replace it.
Why do some watches show the jewel count on the dial? It's a tradition from the days when jewels were costly and the count signaled quality.
Keep reading
- How a mechanical watch works, from mainspring to hands
- The escapement explained
- Shock protection
- The movements you'll find in most affordable watches
- Movement decoration
Sources
- Teddy Baldassarre: watch jewels, what they do and why they matter
- Professional Watches: jewels in watches
- Antique Pocket Watch: the patent fight of 1704
- Monochrome: jewel bearings in watch movements
- Ethos: the jewels that keep a watch moving (ISO 1112)
- Caliber Corner: ETA Caliber 2824-2
- Caliber Corner: Rolex Caliber 7135