Anatomy of a Watch: Every Part Named and Explained

Anatomy of a Watch: Every Part Named and Explained

A watch has three main sections: the case, which holds and protects everything; the dial and hands, which show the time; and the movement, the engine inside that keeps time. Around them sit the parts you touch and see every day: the bezel ringing the crystal, the crown for setting and winding, the lugs that hold the strap, and the caseback that seals the case. Knowing the names makes it far easier to read product descriptions, compare watches and talk with a watchmaker.

What are the main parts of a watch?

Part

Where it is

What it does

Case

The metal body

Holds and protects the movement and dial

Bezel

The ring around the crystal

Frames the dial; on some watches it rotates for timing

Crystal

The clear cover over the dial

Protects the dial and hands

Dial

The face

Carries the markers, numbers and text

Hands

Above the dial

Point to the hours, minutes and seconds

Crown

Usually at 3 o'clock

Sets the time and date; winds mechanical watches

Pushers

Beside the crown, on some watches

Operate a chronograph or other functions

Lugs

Top and bottom of the case

Hold the strap or bracelet

Caseback

The back of the case

Seals the case; on some watches, shows the movement

Movement

Inside the case

Keeps time and drives the hands

Strap or bracelet

Around your wrist

Holds the watch on

The case

The case is the watch's body, usually made of stainless steel, titanium, gold, ceramic or another durable material. It has several parts of its own:

  • The middle case, or case band: the main ring of metal, forming the sides of the watch.
  • The case flanks: the sides you see in profile, often polished or brushed.
  • The lugs: the four projections at the top and bottom that hold the strap or bracelet. Their shape has a big effect on how a watch sits on the wrist.
  • The crown guards, on some watches: raised shoulders on either side of the crown that protect it from knocks.

Cases are described by their diameter, thickness and lug-to-lug length. See How to read a watch spec sheet.

The bezel

The bezel is the ring that surrounds the crystal on the top of the case. On a dress watch it may be a simple polished frame. On a dive watch it rotates in one direction and carries a minute scale for timing a dive; on a GMT watch it may show a 24-hour scale; on a chronograph it may carry a tachymeter scale for measuring speed. See Bezels explained.

The crystal

The crystal is the transparent cover over the dial. Despite the name, it is usually made of sapphire, mineral glass or acrylic, not natural crystal. Sapphire is the most scratch-resistant; acrylic is the easiest to polish but scratches easily; mineral glass sits between them. Some crystals have an anti-reflective coating, and some have a small magnifying lens over the date.

The dial and what's on it

The dial is the face of the watch. It can be painted, lacquered, enameled, textured or finished with a sunburst pattern that catches the light. On and around it you'll find:

  • Indices, or hour markers: the lines, dots, batons or numerals that mark the hours.
  • The minute track: the fine scale of 60 marks for reading minutes and seconds.
  • The chapter ring: a ring at the dial's edge carrying the minute track or numerals.
  • The rehaut: the angled inner ring between the dial and the crystal, sometimes printed or engraved.
  • Sub-dials: small dials within the main dial, for running seconds, chronograph counters or a second time zone.
  • The date window: an opening showing the date, sometimes with the day.
  • Lume: luminous material on the hands and markers that glows in the dark.
  • Text: the brand name, and often the movement type, water resistance or country of origin.

See Reading the dial.

The hands

The hands point to the time: an hour hand, a minute hand and usually a seconds hand. Watches with extra functions add more, such as a chronograph seconds hand or a 24-hour GMT hand. Hands come in many shapes, from simple batons to swords, dauphine and cathedral styles. See Watch hands explained.

The crown and pushers

The crown is the small knob on the side of the case, usually at 3 o'clock. Pulling it out to different positions lets you set the date and time; on most mechanical watches, turning it while pushed in winds the mainspring. On watches built for water, the crown often screws down onto the case to seal it. Chronographs add pushers, buttons beside the crown that start, stop and reset the stopwatch. See Crowns explained.

Lugs, spring bars and lug width

The strap or bracelet attaches between the lugs on small spring-loaded pins called spring bars. Many modern straps have quick-release spring bars with a small lever, so you can change straps without tools. The distance between the lugs, the lug width, determines which straps fit, typically 18 to 22 mm on a men's watch.

The strap or bracelet

  • Straps are made of leather, rubber, fabric or other materials, with a buckle or a folding clasp.
  • Bracelets are made of metal links. They usually attach through end links shaped to fit the case and close with a clasp, often with a fine adjustment for fit.
  • Keepers are the loops that hold the tail of a strap in place.

The caseback

The caseback closes the back of the case. It can be solid, often engraved, or an exhibition caseback with a sapphire window that shows the movement. It may screw on, snap on or be held by small screws, and it carries a gasket that helps keep out water and dust. See Casebacks explained.

The movement

The movement, also called the caliber, is the engine inside the watch. It keeps time and drives the hands, and it comes in three main types:

  • Quartz, powered by a battery and regulated by a vibrating quartz crystal.
  • Automatic, a mechanical movement that winds itself as you move.
  • Hand-wound, a mechanical movement that you wind by turning the crown.

See Quartz vs automatic vs mechanical: the complete guide and How a mechanical watch works.

The parts you can't see

  • Gaskets: rubber or synthetic seals around the crystal, caseback and crown that keep out water and dust.
  • The stem: the rod that connects the crown to the movement.
  • The movement holder: a ring or spacer that holds the movement firmly in the case.
  • Dial feet: small pins on the back of the dial that hold it to the movement.

These are the parts a watchmaker checks or replaces during a service. Gaskets in particular age and need replacing to keep a watch water-resistant.

How the parts fit together

A watch is assembled from the inside out. The dial is fitted to the movement, and the hands are pressed onto their posts. The movement goes into the case, held by its holder. The crystal and bezel close the front, the crown and stem are fitted, and the caseback seals the back. Finally, the watch is tested for water resistance and timekeeping, and the strap or bracelet is attached.

How this applies to Vardesso

Every Vardesso product page uses these same terms in its specifications, from case diameter and lug width to crystal type and caseback, and each spec links to its explanation. If you ever wonder what a term means, this article and the spec-sheet guide have you covered.

Questions and answers

What are the parts of a watch called?

The main parts are the case, bezel, crystal, dial, hands, crown, lugs, caseback, movement and strap or bracelet. Many watches also have pushers, sub-dials and a date window.

What is the bezel on a watch?

The bezel is the ring around the crystal on top of the case. It can be a simple frame or carry a rotating scale for timing, a 24-hour scale or a tachymeter.

What is the difference between the bezel and the crystal?

The crystal is the clear cover over the dial; the bezel is the ring around it.

What is the crown on a watch?

The crown is the knob on the side of the case used to set the time and date, and to wind most mechanical watches.

What are the lugs on a watch?

Lugs are the four projections at the top and bottom of the case that hold the strap or bracelet.

What is lug width?

Lug width is the distance between the lugs, in millimeters. It tells you which strap width fits the watch.

What is the watch face called?

The face is called the dial.

What is a sub-dial?

A small dial within the main dial, used for running seconds, chronograph counters, a second time zone or other information.

What is the rehaut?

The rehaut is the angled ring between the edge of the dial and the crystal. Some brands print or engrave it.

What is the movement in a watch?

The movement, or caliber, is the internal mechanism that keeps time and moves the hands. It can be quartz, automatic or hand-wound.

What is a caseback?

The caseback is the back cover of the case. It can be solid or have a window showing the movement.

What are spring bars?

Small spring-loaded pins that fit between the lugs and hold the strap or bracelet in place.

What are the buttons on the side of a watch?

They're usually pushers, which operate a chronograph or other functions. The larger knob is the crown.

What is the crystal on a watch made of?

Usually sapphire, mineral glass or acrylic. Sapphire is the most scratch-resistant.

Keep reading

  • How to read a watch spec sheet
  • Reading the dial
  • Watch hands explained
  • Crowns explained
  • Bezels explained
  • Quartz vs automatic vs mechanical: the complete guide

Sources