Confusing Watch Terms Explained: A Plain-English Guide for Beginners

Confusing Watch Terms Explained: A Plain-English Guide for Beginners

Watch language borrows from French, Swiss and German workshops, from the military, and from decades of collector slang, so it's no surprise beginners get tangled. The pairs that cause the most confusion are chronograph vs chronometer, automatic vs mechanical, water-resistant vs waterproof, and caliber vs reference. This guide explains those and dozens of other terms in plain English, grouped so you can find what you need quickly.

The pairs people mix up most

Chronograph vs chronometer

The most confused pair in watches.

  • A chronograph is a watch with a stopwatch function. It has pushers on the side to start, stop and reset, and usually sub-dials to count minutes and hours.
  • A chronometer is a watch whose movement has passed an official accuracy test, such as the Swiss COSC certification. It's about precision, not a feature you operate.

A watch can be one, both or neither. See Chronometer certification.

Automatic vs mechanical

  • Mechanical means the watch is powered by a wound spring rather than a battery.
  • Automatic means a mechanical watch that winds itself as you move, using a rotor.

So every automatic is mechanical, but not every mechanical watch is automatic: a hand-wound watch is mechanical too. See Mechanical vs automatic: clearing up the terms.

Water-resistant vs waterproof

No watch is truly waterproof forever, so reputable brands say water-resistant, followed by a rating in meters, ATM or bar. That rating comes from a pressure test in a laboratory, not a depth you can safely dive to. See Water resistance ratings explained.

Caliber vs reference vs serial number

  • Caliber (or calibre): the movement's model name or number, such as NH35 or SW200-1.
  • Reference: the watch model's catalog number, which identifies a specific combination of case, dial and bracelet.
  • Serial number: the unique number of one individual watch.

Movement vs caliber

The movement is the engine inside the watch. The caliber is the name or number of that movement's design. People often use the words interchangeably.

Swiss Made vs Swiss movement

Swiss Made is a legally protected label with specific requirements, including that the watch is cased and inspected in Switzerland. Swiss movement means only that the movement is Swiss; the rest of the watch may be made and assembled elsewhere. See What "Swiss Made" legally means.

Lug width vs lug-to-lug

  • Lug width: the space between the lugs, which sets the strap size (for example, 20 mm).
  • Lug-to-lug: the length of the watch from the tip of the top lugs to the tip of the bottom lugs, which tells you how it will fit. See Lug-to-lug.

Bezel vs crystal vs dial

  • The dial is the face under the hands.
  • The crystal is the clear cover over the dial.
  • The bezel is the ring around the crystal.

See Anatomy of a watch.

GMT vs dual time vs world time

  • GMT: a watch with an extra hand that shows a second time zone on a 24-hour scale.
  • Dual time: any watch that shows two time zones, by whatever method.
  • World time: a watch that shows the time in all 24 major time zones at once, usually using a ring of city names.

Movement and mechanics terms

Term

What it means

Complication

Any function beyond hours, minutes and seconds, such as a date or chronograph

Jewels

Synthetic rubies used as low-friction bearings in a mechanical movement

Power reserve

How long a mechanical watch runs when fully wound

Hacking

The seconds hand stops when you pull out the crown, for precise setting

Hand-winding

Winding a mechanical watch by turning the crown

Quickset date

Changing the date directly with the crown instead of turning the hands through 24 hours

Beat rate (vph or bph)

How fast the balance wheel oscillates, in vibrations or beats per hour

In-house movement

A movement designed and made by the watch brand itself

Rotor

The weight that spins to wind an automatic movement

Mainspring

The coiled spring that stores a mechanical watch's energy

Escapement

The part that releases the mainspring's energy in small, regular steps

Regulation

Adjusting a mechanical movement to run faster or slower

Service

A full clean, lubrication and inspection of a movement

Magnetized

A watch whose hairspring has been affected by a magnetic field, usually making it run fast

For more, see How a mechanical watch works and What are jewels in a watch?

Accuracy terms

  • Seconds per day (s/d or spd): how much a mechanical watch gains or loses each day. "+5 s/d" means it gains five seconds a day.
  • Seconds per month: the usual unit for quartz accuracy.
  • COSC: the Swiss organization that tests movements for chronometer certification.
  • Positional variance: the difference in rate depending on which way the watch is facing.
  • Timegrapher: a machine that listens to a mechanical watch and measures its rate.

See How accurate should a watch be?

Case and dial terms

Term

What it means

Case diameter

The case's width, usually excluding the crown

Rehaut

The inner wall between the dial and the crystal

Indices

The hour markers

Applied markers

Markers made separately and fixed to the dial

Lume

Luminous material on the hands and markers

Sandwich dial

A two-layer dial with lume showing through cut-outs

Sterile dial

A dial with no brand name

Cyclops

A magnifying lens over the date window

Sunburst

A dial finish of fine lines radiating from the center

Fumé

A dial that darkens toward the edge

Exhibition caseback

A see-through caseback that shows the movement

Screw-down crown

A crown that screws onto the case for a better seal

Crown guards

Shoulders on the case that protect the crown

Quick-release spring bars

Strap pins with small levers that let you change straps without tools

Micro-adjust

A clasp feature for fine-tuning bracelet length without removing links

Collector slang

  • Grail: the watch you dream of owning someday.
  • Beater: a tough, inexpensive watch you can wear without worry.
  • Daily driver: the watch you wear most days.
  • Wrist roll: a set of photos or a video of someone's whole collection, one watch after another.
  • Wrist shot: a photo of a watch on the wrist.
  • Box and papers: a pre-owned watch sold with its original box and documents. "Full set" or "full kit" means everything that came with it.
  • Homage: a watch that closely resembles a famous design, sold under its own brand. Not the same as a counterfeit, which pretends to be the original brand.
  • Microbrand: a small, independent watch brand, usually selling directly online.
  • Tool watch: a watch built for a job, such as diving, flying or exploring.
  • Patina: the changes age brings to a watch, such as faded bezels or creamy lume, often prized on vintage watches.
  • Tropical dial: a dial that has faded to brown with age and sunlight.
  • NOS (new old stock): an older watch or part that was never sold or used.
  • Flipper: someone who buys watches to resell quickly at a profit.
  • Watch fam or WIS: the watch community; WIS stands for "watch idiot savant," a self-deprecating name enthusiasts use for themselves.

Buying terms

  • AD (authorized dealer): a retailer authorized by the brand to sell its new watches.
  • Grey market: new watches sold by retailers outside the brand's authorized network, often at a discount and sometimes without the manufacturer's warranty.
  • MSRP or retail: the brand's suggested price.
  • Pre-owned: previously owned; the polite term for used.
  • Limited edition: a model made in a fixed number, sometimes numbered on the caseback.

Units and abbreviations

Abbreviation

Meaning

mm

Millimeters (case sizes are always given in mm)

ATM

Atmospheres; 1 ATM is about 10 meters of water resistance

bar

A unit of pressure; 1 bar is also about 10 meters

WR

Water resistance

vph / bph

Vibrations or beats per hour

s/d

Seconds per day

L2L

Lug-to-lug

PVD / DLC

Thin, hard coatings used to color or protect a case

COSC

Swiss Official Chronometer Testing Institute

GMT

Greenwich Mean Time; on a watch, a second-time-zone function

How this applies to Vardesso

Every term on a Vardesso product page has an explanation somewhere in this encyclopedia. If you come across a word on our site that isn't covered, or isn't clear, let us know and we'll explain it, and add it here for the next reader.

Questions and answers

What is the difference between a chronograph and a chronometer?

A chronograph is a watch with a stopwatch function. A chronometer is a watch whose movement has passed an official accuracy test. A watch can be either, both or neither.

Is an automatic watch the same as a mechanical watch?

An automatic is a type of mechanical watch, one that winds itself as you move. Hand-wound watches are mechanical but not automatic.

Is a water-resistant watch waterproof?

No. Water resistance is rated for a laboratory pressure test, and seals age. Reputable brands don't call watches waterproof.

What does caliber mean on a watch?

The name or number of the movement's design, such as NH35 or SW200-1.

What is a reference number on a watch?

The catalog number of a specific watch model, identifying its particular case, dial and bracelet combination.

What is a complication on a watch?

Any function beyond telling the hours, minutes and seconds, such as a date, chronograph or second time zone.

What does "grail watch" mean?

The watch you dream of owning someday, often one that's rare or expensive.

What is a beater watch?

A durable, usually inexpensive watch you can wear anywhere without worrying about damage.

What is a homage watch?

A watch that closely resembles a famous design but carries its own brand name. Unlike a counterfeit, it doesn't pretend to be the original.

What does "box and papers" mean?

A pre-owned watch sold with its original box and documents, such as the warranty card.

What is the grey market for watches?

New watches sold by retailers outside the brand's authorized network, often at a discount and sometimes without the manufacturer's warranty.

What does s/d mean for watches?

Seconds per day, the unit used for a mechanical watch's accuracy.

What does hacking mean on a watch?

The seconds hand stops when you pull out the crown, so you can set the time to the second.

What does GMT mean on a watch?

It stands for Greenwich Mean Time. On a watch, it means a function that shows a second time zone on a 24-hour scale.

What is a tool watch?

A watch designed for a practical job, such as diving, flying or exploring, with features to match.

Keep reading

  • Anatomy of a watch
  • How to read a watch spec sheet
  • Quartz vs automatic vs mechanical: the complete guide
  • Generic and clone movements
  • How to choose your first watch

Sources