The dial is the face of a watch: the plate beneath the hands that carries everything you read. Its main parts are the hour markers (also called indices), the minute track or chapter ring around the edge, the rehaut (the inner wall between the dial and the crystal), any sub-dials (small dials for seconds, timing or other functions), apertures such as the date window, and the printed text. Once you can name those parts, even a busy chronograph dial becomes easy to read.
The parts of a dial at a glance
|
Part |
Where it is |
What it does |
|---|---|---|
|
Hour markers (indices) |
Around the dial at each hour |
Mark the 12 hours |
|
Minute track |
Around the outer edge |
Marks the 60 minutes and seconds |
|
Chapter ring |
A separate ring at the edge, when present |
Carries the minute track or hour numerals |
|
Rehaut |
The sloped or vertical inner wall between dial and crystal |
Frames the dial; sometimes printed or engraved |
|
Sub-dials |
Smaller dials within the main dial |
Show running seconds, chronograph counters, a second time zone and more |
|
Apertures |
Windows cut into the dial |
Show the date, day, moon phase or power reserve |
|
Dial text |
Usually below 12 and above 6 |
Brand, model, movement type, depth rating, origin |
|
Lume |
On markers and hands |
Glows for reading in the dark |
How do you read the time on an analog watch?
The short hand points to the hour. The long hand points to the minute: each hour marker stands for five minutes (the marker at 1 is 5 minutes past, at 2 is 10 past, and so on), and the small ticks between them count single minutes. The thin hand that moves every second, or sweeps around the dial, is the seconds hand.
On a watch with no numerals, the trick is to learn the positions rather than the numbers. Most dials give you landmarks: a bigger marker or a triangle at 12, numerals or longer markers at 3, 6 and 9, and a date window that often replaces the 3 o'clock marker.
Hour markers (indices)
The hour markers do more than anything else to set a watch's character. The main types:
- Batons or sticks: simple bars. Clean and versatile; common on dress and everyday watches.
- Arabic numerals: 1, 2, 3 and so on. Very legible; standard on field and pilot watches.
- Roman numerals: I to XII. Classic and formal. Many Roman dials use IIII rather than IV for four, a long tradition on clock and watch faces.
- Dots, circles and triangles: common on dive watches, where large luminous shapes are easy to read underwater. A triangle or inverted triangle at 12 is a classic orientation mark.
- Breguet numerals: elegant Arabic numerals with an open, curved style, used on formal watches.
- Mixed layouts: combinations such as numerals at 3, 6 and 9 with batons elsewhere. A "California" dial pairs Roman numerals on the top half with Arabic numerals on the bottom.
Applied vs printed markers
Applied markers are separate pieces, usually metal, fixed to the dial with small feet or adhesive. They catch light, add depth, and cost more to make and fit. Printed markers are printed directly onto the dial. They can be just as legible and are standard on many tool watches and on numeral-heavy dials. Neither is better in principle; applied markers simply add dimension and polish.
Luminous markers
On many watches, the markers are filled or coated with luminous material, or are luminous shapes printed on the dial. On a sandwich dial, the markers are cut out of a top plate, revealing a luminous layer beneath. Lume quality varies a great deal; brighter and longer-lasting lume costs more.
The minute track and chapter ring
What is a minute track?
The minute track is the scale of 60 small marks around the edge of the dial, used to read the minute and the seconds precisely. A railroad minute track is drawn as two parallel lines with ticks between them, like a railway seen from above.
What is a chapter ring?
The chapter ring is the ring that carries the hour numerals or the minute track. The name comes from clockmaking, where the ring of hour numerals on a clock face was called the chapter ring. On a watch, it may be printed on the dial itself or made as a separate ring, sometimes raised or angled, around the dial's edge. Many people use "chapter ring" and "minute track" loosely for the same thing.
The rehaut
The rehaut (pronounced roughly "ruh-OH") is the inner wall or flange that runs between the dial's edge and the crystal. It's often angled, which helps a watch look deeper and more finished. Some brands print a minute scale on the rehaut; others engrave their name or a serial number around it, both as decoration and as a way to make a watch harder to copy.
The rehaut is easy to overlook in photos and impossible to miss in person. A neatly finished rehaut that lines up with the minute track is a good sign of care in manufacture.
Sub-dials
Sub-dials, sometimes called registers or counters, are small dials set into the main dial. Each one does a different job. The quickest way to work out what a sub-dial does is to look at its scale:
|
Scale on the sub-dial |
What it usually shows |
|---|---|
|
0 to 60 |
Running seconds (small seconds) or chronograph seconds |
|
0 to 30 |
Chronograph minutes (a 30-minute counter) |
|
0 to 12 |
Chronograph hours (a 12-hour counter) |
|
0 to 24 |
A 24-hour indicator or a second time zone |
|
1 to 31 |
Date (a pointer date) |
|
A fuel-gauge scale |
Power reserve |
|
Days of the week |
Day of the week |
Small seconds
A small seconds sub-dial, usually at 6 or 9 o'clock, shows the running seconds instead of a central seconds hand. It's traditional on dress watches and hand-wound movements.
Chronograph layouts
Chronographs (watches with a stopwatch function) typically have two or three sub-dials:
- Two sub-dials (bi-compax), usually at 3 and 9 o'clock: running seconds and a 30-minute counter.
- Three sub-dials (tri-compax), at 3, 6 and 9 o'clock, or at 6, 9 and 12 as on the popular Valjoux 7750 layout: running seconds, a 30-minute counter and a 12-hour counter.
On a chronograph, the large central seconds hand usually belongs to the stopwatch and stays at zero until you start it, while the running seconds live in a sub-dial. Beginners often think their chronograph has stopped when the central hand sits still; check the small-seconds sub-dial instead.
Apertures and windows
- Date window: usually at 3 o'clock, sometimes at 4:30 or 6. A good date window has a neat frame and a date disc whose color matches the dial.
- Day-date: two windows, or one wide window, showing the day of the week and the date.
- Cyclops: a small magnifying lens on the crystal above the date, popularized by Rolex in the 1950s. People either love it or don't.
- Moon phase: a window showing a disc with the moon's current phase.
- Power reserve, open heart and others: some dials show the remaining power or cut away part of the dial to reveal the balance wheel. See Skeleton and open-heart watches.
What does the text on a dial mean?
Most dials carry a few lines of text. Typical examples:
- Brand and logo, usually below 12.
- Model name or line.
- Movement type: "Automatic," "Quartz," "Chronometer."
- Water resistance: "200 m," "20 ATM," or "Diver's 200 m" on watches that meet the diver's standard.
- Origin: "Swiss Made," "Japan Movt" and similar, usually at 6. Origin wording on a dial is regulated. See What "Swiss Made" legally means.
A sterile dial carries no brand name at all, a look some military and tool-watch fans prefer. Too much dial text can make a watch look cluttered; collectors often count the lines and praise restraint.
Dial finishes and colors
Dials come in a wide range of finishes: sunburst (fine lines radiating from the center that catch light), matte, gloss lacquer, enamel, textured and guilloché (engraved patterns), and fumé (a color that darkens toward the edge). Finish matters for legibility as much as looks. A glossy black dial with polished hands can disappear in some light, while a matte dial with white markers stays readable from any angle.
How to judge a dial's legibility
- Contrast: Are the hands and markers clearly lighter or darker than the dial?
- Hand length: Does the minute hand reach the minute track, and the hour hand reach the markers?
- Hand shape: Can you tell the hour hand from the minute hand at a glance? See Watch hands explained.
- Clutter: Does the text or a sub-dial crowd the markers?
- Reflections: Does the crystal's anti-reflective coating keep the dial readable in bright light?
- Lume: Can you read it in the dark?
What to check on a dial before you buy
Use your phone's camera zoom as a magnifier and look for:
- Markers lined up precisely with the minute track
- Crisp printing with clean edges and no smudges
- Even lume application across all markers
- No dust or fibers under the crystal
- A centered, well-framed date window
- Sub-dials centered on their markers
Small flaws on an affordable watch aren't unusual, but a reputable seller should replace a watch that arrives with dust under the crystal or a misaligned marker.
How this applies to Vardesso
When you compare Vardesso models, run the legibility checklist above against the close-up dial photos on each product page: contrast, hand length and lume matter more day to day than any single spec. If a model has sub-dials, the scale table in this article tells you what each one does, and if anything about a dial isn't clear from the photos, ask us before you order.
Questions and answers
What is the face of a watch called?
The dial. It's the plate under the hands that carries the hour markers, the minute track and any text or sub-dials.
What are the markers on a watch called?
Hour markers, also called indices or indexes. They can be batons, numerals, dots or other shapes.
What is a chapter ring on a watch?
The ring around the dial's edge that carries the minute track or hour numerals. It can be printed on the dial or made as a separate ring.
What is the rehaut on a watch?
The inner wall or flange between the edge of the dial and the crystal. It's often angled and sometimes printed with a scale or engraved.
What are the small dials on a watch face?
Sub-dials. They show extra information such as running seconds, chronograph minutes and hours, a second time zone or the date.
Why isn't the big seconds hand moving on my chronograph?
On most chronographs, the central seconds hand is the stopwatch hand and stays at zero until you start the chronograph. The running seconds are shown in a small sub-dial.
What is the difference between applied and printed indices?
Applied indices are separate pieces fixed to the dial, which add depth and shine. Printed indices are printed directly on the dial.
What is a sandwich dial?
A dial made of two layers: a top plate with the markers cut out and a luminous layer beneath that glows through the openings.
Why do some watches use IIII instead of IV?
It's a long tradition on clock and watch faces. IIII balances visually with VIII on the opposite side of the dial, among other explanations.
What is a sterile dial?
A dial with no brand name or logo.
What does a cyclops do on a watch?
It magnifies the date window so the date is easier to read.
Where is the date window usually placed?
Most often at 3 o'clock, sometimes at 4:30 or 6 o'clock.
What is a railroad minute track?
A minute track drawn as two parallel lines with ticks between them, like a railway seen from above.
How can I tell what a sub-dial is for?
Look at its scale: 60 usually means seconds, 30 means chronograph minutes, 12 means chronograph hours and 24 means a 24-hour or second time zone display.
Keep reading
- Anatomy of a watch
- Watch hands explained
- Bezels explained
- Watch terms beginners find confusing
- What makes a watch well made?