The bezel is the ring that surrounds the crystal on top of the watch case. A fixed bezel is mainly decorative and protects the crystal's edge, while a rotating bezel is a tool. The most common rotating type is the dive bezel, a one-way 60-minute scale for timing elapsed minutes. Other bezels track a second time zone (GMT), count down to an event, measure speed (tachymeter), or help you find direction (compass).
What does a bezel do?
Every bezel does two jobs: it holds or frames the crystal, and it protects the crystal's edge from knocks. Many bezels do a third job as well, carrying a scale that turns the watch into a simple tool. You line the scale up with a hand, and it does the arithmetic for you.
The main types of bezel
|
Bezel type |
Scale |
Rotation |
What it's for |
|---|---|---|---|
|
Plain or decorative |
None, or polished, fluted or engraved |
Fixed |
Style and protecting the crystal |
|
Dive (elapsed time) |
0 to 60 minutes, first 15 often marked in detail |
One-way (counterclockwise) |
Timing a dive or any task |
|
Countdown |
60 to 0 minutes |
Usually two-way |
Counting down to an event |
|
12-hour |
1 to 12 |
Usually two-way |
A second time zone or tracking hours |
|
GMT (24-hour) |
0 to 24 hours |
Two-way, or fixed |
Reading a second time zone with a GMT hand |
|
Tachymeter |
Speeds, typically 500 down to 60 |
Fixed |
Measuring average speed with a chronograph |
|
Compass |
Cardinal points and degrees |
Two-way |
Finding direction using the sun |
|
Slide rule |
Logarithmic scale |
Two-way, against a fixed dial scale |
Calculations such as fuel, speed and conversions |
Fixed bezels
A fixed bezel doesn't turn. It may be plain and polished, brushed, fluted (with fine ridges), engraved, gem-set, or printed with a scale such as a tachymeter. On dress watches the bezel is often slim so the dial looks larger. On sports watches a fixed bezel can still be bold and protective.
Dive bezels
A dive bezel carries a 60-minute scale with a luminous marker, called a pip, at zero. It rotates in one direction only: counterclockwise. That one-way design is a safety feature. If the bezel is knocked during a dive, it can only move in the direction that makes the elapsed time look longer, so the diver will surface early rather than late.
The international standard for divers' watches, ISO 6425, requires a way to preselect and read elapsed time that is protected against being moved by accident; on a mechanical diver, that's almost always a one-way bezel. Dive bezels usually click in 60 or 120 steps per full turn, so each click is a minute or half a minute.
How to use a dive bezel
- Turn the bezel until the zero marker (the pip) lines up with the minute hand.
- Read the elapsed time where the minute hand points on the bezel scale. If the minute hand points to 20, twenty minutes have passed.
- Reset by turning it again when you start something new.
You don't have to be a diver to use one. It's just as handy for parking meters, cooking, laundry, workouts and meetings.
Using a dive bezel as a reminder
To set a reminder instead, turn the pip to the minute you want to be alerted to, for example 30 minutes from now. When the minute hand reaches the pip, time's up.
Countdown bezels
A countdown bezel runs from 60 down to 0. Set the number of minutes you have left against the minute hand, and the remaining time shrinks as the hand approaches zero. It's useful for timing a deadline, a presentation or a sailing race start.
12-hour bezels
A 12-hour bezel shows the numbers 1 to 12 and usually turns both ways. Turn it by the number of hours between your home and your destination, and the hour hand reads the second time zone against the bezel. It's a simple way to track two time zones without a GMT movement.
GMT bezels
A GMT bezel carries a 24-hour scale. It works with a GMT hand, an extra hand that makes one turn every 24 hours.
How to use a GMT bezel
- Set the GMT hand to your home time on the 24-hour scale (for example, 14 for 2 p.m.).
- To read a third time zone, turn the bezel by the number of hours of difference. For example, if the GMT hand points to 14, turning the bezel until 17 sits under the hand shows a zone three hours ahead.
- Read the 24-hour time where the GMT hand points on the bezel.
Two-color GMT bezels split day and night hours, which is why many are half one color, half another. Collectors give some combinations nicknames, such as "Pepsi" for red and blue.
Tachymeter bezels
A tachymeter is a fixed scale, usually on the bezel of a chronograph, that converts the time taken to travel a known distance into speed.
How to use a tachymeter
- Start the chronograph as you pass a marker, such as a mile or kilometer post.
- Stop it as you pass the next marker one mile or one kilometer later.
- Read the number on the tachymeter scale where the chronograph seconds hand stopped. That's your average speed in miles or kilometers per hour.
The scale is simply 3,600 divided by the number of seconds: 20 seconds gives 180, 45 seconds gives 80. Most tachymeters run from about 500 down to 60, so they work for times between roughly 7 and 60 seconds. You can also use the scale to measure rates: start the chronograph when a task begins, stop it after one unit is completed, and the scale tells you how many units per hour.
Compass bezels
A compass bezel carries the points of the compass (N, E, S, W) and sometimes degrees. With the sun, it can help you find direction.
How to find south with a watch (Northern Hemisphere)
- Hold the watch flat and point the hour hand at the sun.
- South lies halfway between the hour hand and 12 o'clock. During daylight saving time, use 1 o'clock instead of 12.
- Turn the bezel so S lines up with that halfway point, and read the other directions from the bezel.
In the Southern Hemisphere, point 12 o'clock at the sun; north lies halfway between 12 and the hour hand. It's an approximation, but a useful one when you need a rough bearing.
Slide-rule bezels
A slide-rule bezel carries a logarithmic scale that rotates against a second scale on the dial. Pilots use it for calculations such as fuel consumption, rate of climb, speed and unit conversions. It's the most complex bezel to learn and the one most closely tied to aviation.
Internal rotating bezels
Some watches put the rotating bezel inside the crystal, turned by a second crown. This protects the scale from knocks and keeps the bezel from turning accidentally. It's a classic feature of compressor-style dive watches.
Bezel inserts and materials
On many rotating bezels, the scale is printed or engraved on an insert set into a metal ring:
- Aluminum: light and inexpensive. It scratches and fades over time, which some collectors find charming.
- Ceramic: extremely scratch-resistant and fade-proof, with a glossy look. It can crack or chip if struck very hard.
- Sapphire: scratch-resistant and luminous scales can be placed beneath it.
- Steel: with engraved, filled numerals; durable and classic.
How to judge bezel quality
- Alignment: When the bezel clicks into place, the zero marker should sit exactly at 12, not slightly off.
- Action: Each click should feel crisp and positive, with no mushy or skipped clicks.
- Back-play: The bezel shouldn't wiggle back and forth much between clicks.
- Grip: The edge should be easy to grip, even with wet hands.
- Lume: On a dive bezel, the pip should glow.
- Fit: The insert should sit flush with no gaps.
Bezel care
After salt water, sand or chlorinated pools, rinse the watch in fresh water and turn the bezel a few full rotations while rinsing. Sand and salt can build up under the bezel and make it stiff. If a bezel becomes gritty or stops clicking, a watchmaker can remove, clean and refit it.
How this applies to Vardesso
If you're choosing a Vardesso dive, GMT or chronograph model, the bezel is the part you'll use most. Check its type and scale on the product page, and practice with it the first week: time your next parking meter with the dive bezel, or set the GMT bezel for a city you call often.
Questions and answers
What is the bezel on a watch?
The ring around the crystal on top of the case. It frames and protects the crystal and often carries a scale for timing or other uses.
Why do dive watch bezels only turn one way?
For safety. If the bezel is knocked, it can only move in the direction that makes the elapsed time look longer, so a diver surfaces early rather than late.
Which way should a dive bezel turn?
Counterclockwise.
How do you use a rotating bezel on a watch?
Turn the zero marker to line up with the minute hand. The minute hand then shows elapsed minutes on the bezel scale.
What is a GMT bezel used for?
It carries a 24-hour scale used with a GMT hand to show a second time zone. Turning it can show a third.
What is a tachymeter on a watch?
A scale used with a chronograph to measure average speed over a known distance, such as a mile or a kilometer.
How do you read a tachymeter?
Start the chronograph at one marker, stop it one mile or kilometer later, and read the number where the seconds hand stops. That's your speed per hour.
What is a countdown bezel?
A bezel numbered from 60 down to 0, used to count down the minutes remaining until an event.
How do you use a compass bezel?
In the Northern Hemisphere, point the hour hand at the sun; south lies halfway between the hour hand and 12. Turn the bezel's S to that point.
What is the difference between ceramic and aluminum bezel inserts?
Ceramic is far more scratch-resistant and won't fade but can crack if struck hard. Aluminum is lighter and cheaper, and it scratches and fades with age.
Why is my watch bezel hard to turn?
Usually salt, sand or dirt underneath it. Rinse it in fresh water while turning it; if it stays stiff, have a watchmaker clean it.
What is a fluted bezel?
A fixed bezel with fine ridges cut around it, a decorative style that catches the light.
Do I need a rotating bezel?
No, but it's useful. A dive bezel is one of the most practical everyday tools on a watch, from parking meters to cooking.
What is the dot at 12 on a dive bezel?
The pip: a luminous marker at zero that you line up with the minute hand.
Keep reading
- Anatomy of a watch
- Reading the dial
- Watch hands explained
- Water resistance ratings explained
- What makes a watch well made?