How to Change a Watch Battery: DIY vs Watchmaker

How to Change a Watch Battery: DIY vs Watchmaker

A quartz watch battery typically needs replacing every few years, and sooner if the watch has extra features. For a watch that isn't water resistant, a careful home swap with the right tools is possible. For a water-resistant watch, the safest choice is a watchmaker who replaces the gasket and pressure-tests the case afterwards.

How do you know a watch battery is running low?

  • The second hand starts jumping in two-, three- or four-second steps on watches that normally tick every second. Some quartz watches have this end-of-life indicator built in. Check your manual.
  • The watch runs slow or stops intermittently.
  • A display fades or hands move weakly.
  • The watch has stopped completely.

Don't leave a dead battery in the watch. Old cells can leak and corrode the contacts and movement, which turns an inexpensive job into a costly one.

How long does a watch battery last?

It depends on the movement and the battery size. Simple analog quartz watches often run for a couple of years or more on one cell, and watches with a chronograph, backlight or other features draw more power. Retailers commonly suggest replacing the battery within about two years to avoid leakage, even if the watch is still running. Follow your maker's guidance for your model.

Why isn't a battery change just a battery change?

Opening the caseback breaks the seal. A water-resistant watch relies on a gasket between the caseback and the case, and the gasket is compressed and aged every time the case is opened. Professionals don't only swap the cell; they typically inspect for leakage and corrosion, clean the contacts, check the gasket, replace it if needed, lubricate it, close the case correctly and pressure-test it. Casio's customer guidance, for example, says a technician will inspect the watch for proper water resistance whenever the battery is replaced.

A kiosk or shop that swaps the battery and closes the case without replacing the seal or testing it may leave a water-resistant watch without its water resistance, even though the dial still says otherwise.

Is a DIY battery change safe?

Watch

DIY?

Why

Quartz, not water resistant, with a simple snap-off back

Reasonable, with care

Low risk to seals; the main risks are scratches, a bent contact or the wrong cell

Quartz, water resistant, with a screw-down or tight snap-on back

Risky

You can't confirm the seal afterwards without a pressure test

Dive watch, solar, smart or any watch with unusual electronics

Leave it to a professional

Special cells, circuits or seals

Mechanical or automatic

Not applicable

No battery

If you do a DIY change, treat the watch as dust-and-splash-proof at best until it has been tested.

How do you change a battery at home (non-water-resistant quartz)?

  1. Check the model's battery code in the manual or on the old cell.
  2. Work on a clean, soft, well-lit surface and have a small tray for parts.
  3. Open the caseback with the correct tool for its type: a case knife with a notch for snap-off backs, or a proper case-back wrench for screw backs. Using a general screwdriver or a butter knife is a common way to scratch a case.
  4. Note the battery's position and orientation, and photograph it.
  5. Remove the old cell with plastic tweezers or a non-metal tool. Metal tweezers can short a contact.
  6. Insert the new cell the same way round, without touching the faces more than needed.
  7. Check the hands move and the watch runs.
  8. Check the gasket, replace it if it's cracked or flat, and close the case fully, with the gasket seated and not pinched.

If anything is unclear, stop and take the watch to a watchmaker.

What should you ask a watchmaker for?

  • A battery of the correct type from a reputable maker.
  • A new caseback gasket and, if the watch is water resistant, new seals as needed.
  • A pressure test after closing, with a result you can see.
  • A check of the movement for leakage, corrosion and function.
  • A clear price up front.

The pressure test is the part many cheaper options skip, so ask whether it is included.

How soon after a battery change can you swim?

Only after the watch has been tested as water resistant. If you did the change yourself without testing, don't swim or shower with the watch. If a watchmaker pressure-tested it, follow their advice, and read our article on whether you can swim or shower with a watch.

How this applies to Vardesso watches

If your Vardesso watch has a quartz movement, check your product page or manual for the battery type and any guidance on replacement. If your watch is water resistant, have the battery changed by a watchmaker who replaces the gasket and pressure-tests the case. If the watch is under any warranty or service arrangement, contact Vardesso before opening it. If your watch is automatic or mechanical, it has no battery.

Questions and answers

How often should a watch battery be changed?

Often every two to three years or more for simple analog watches, sooner with extra features. Replace it before it dies to avoid leakage.

How do I know my watch battery is dying?

The second hand may jump in multi-second steps, the watch may run slow or stop, or hands may move weakly.

Can I change a watch battery myself?

On a simple, non-water-resistant quartz watch, yes, with the right tools and care. For water-resistant watches, it's safer to use a watchmaker who can test the seal.

Will changing the battery affect water resistance?

It can. Opening the case breaks the seal, and the gasket may need replacing and the watch needs testing afterwards.

Do watchmakers pressure-test after a battery change?

Good ones typically do. Ask before you hand it over.

How much does a battery change cost?

It varies. A basic swap is the cheapest; replacing gaskets and pressure-testing costs more. Ask for the price up front and what it includes.

Can I change a battery at a mall kiosk?

You can, but ask whether they replace the gasket and test the seal. If they don't, treat a water-resistant watch as no longer water resistant.

What happens if I leave a dead battery in my watch?

It can leak and corrode the contacts and movement, which can ruin the watch.

What tools do I need to change a battery?

The correct case-opening tool, plastic tweezers, a soft work surface and the right replacement cell. A gasket and gasket grease for water-resistant models.

Why did my watch stop right after a battery change?

The cell may be in the wrong way round, a contact may be bent or dirty, or there may be a fault in the movement. Take it back to the watchmaker.

Do solar watches need battery changes?

They use a rechargeable cell that lasts many years but eventually needs replacing. Leave it to a professional or follow the maker's guidance.

Can I use any battery of the same size?

Use the exact type specified for the watch. Voltage and chemistry matter.

Do automatic watches have batteries?

Purely mechanical automatic watches don't. Some hybrid or special movements do, so check your model.

Keep reading

  • Gaskets and Pressure Testing (/blogs/watch-care/watch-gaskets-and-pressure-testing)
  • Can You Swim or Shower with a Watch? (/blogs/watch-care/can-you-swim-or-shower-with-a-watch)
  • How Often Should a Watch Be Serviced? (/blogs/watch-care/how-often-to-service-a-watch)
  • Fog Under the Crystal: What It Means and What to Do (/blogs/watch-care/fog-under-the-watch-crystal)
  • What Is a Quartz Movement? (/blogs/movements/what-is-a-quartz-movement)
  • Water Resistance Ratings Explained (/blogs/watch-basics/water-resistance-ratings)
  • Watch Casebacks Explained (/blogs/watch-basics/watch-casebacks-explained)

Sources