Most watches are round, but some of the most elegant and distinctive designs in watchmaking use other shapes. The main ones are rectangular (longer than it is wide), square, tonneau (barrel-shaped, wider in the middle and narrower at the ends) and cushion (a square with softly rounded sides). Shaped watches date back to the earliest wristwatches: Cartier's square Santos of 1904 and rectangular Tank of 1917 are among the most influential watch designs ever made. Because they're measured differently from round watches, shaped watches need a little extra care when sizing.
The main case shapes
|
Shape |
What it looks like |
Character |
Classic examples |
|---|---|---|---|
|
Rectangular |
Longer than it is wide, straight sides |
Elegant, formal, Art Deco |
Cartier Tank (1917), Jaeger-LeCoultre Reverso (1931) |
|
Square |
Equal sides, sometimes rounded corners |
Bold, architectural |
Cartier Santos (1904), Heuer Monaco (1969) |
|
Tonneau |
Barrel-shaped: curved sides, wider in the middle |
Sculptural, sporty or luxurious |
Early Cartier tonneau watches (from 1906), many modern luxury designs |
|
Cushion |
A square with bulging, rounded sides |
Sturdy, vintage, often sporty |
Many 1930s to 1970s dive and sports watches |
|
Oval and other shapes |
Ovals, asymmetric and novelty forms |
Distinctive, often jewelry-like |
Dress and designer watches |
A short history of shaped watches
The first wristwatches
When wristwatches emerged in the early 20th century, designers weren't bound by the round shape of pocket watches. In 1904, Louis Cartier designed a square wristwatch with rounded corners and visible screws for his friend, the Brazilian aviator Alberto Santos-Dumont, who needed to read the time without letting go of his controls. See Pilot watches.
Cartier's shapes
Cartier went on to explore many shaped cases, including a tonneau in 1906, the tortoise-shaped Tortue in 1912 and, in 1917, the rectangular Tank, said to have been inspired by the tanks of the First World War. The Tank became a benchmark for dress watches and remains in production.
The Art Deco era
The 1920s and 1930s were the golden age of shaped watches. Art Deco's love of geometry produced rectangular, stepped and curved cases. In 1931, Jaeger-LeCoultre introduced the Reverso, a rectangular watch whose case could be flipped over to protect the crystal, designed for polo players.
Sports and the 1970s
Cushion cases suited early water-resistant and dive watches, and in 1969 Heuer launched the square Monaco, an early automatic chronograph that became a racing icon. See Racing and motorsport chronographs. The 1970s saw many bold, angular and integrated designs. See Integrated-bracelet sports watches.
How shaped watches wear
Shaped watches often look larger than round watches with similar measurements, because their corners fill more of the wrist. A 36 mm-wide rectangular or cushion watch can have the visual presence of a 39 to 40 mm round watch.
- Rectangular watches run along the wrist, so their length matters more than their width.
- Square watches look bold; a little smaller than your usual round size is often right.
- Tonneau watches follow the curve of the wrist, especially when the case itself is curved.
- Cushion watches look sturdy and substantial; they often wear larger than their width.
How to size a non-round watch
For shaped watches, a single "diameter" doesn't tell you enough. Look for:
- Width: side to side, excluding the crown.
- Length: top to bottom, usually including the lugs, which is the shaped-watch equivalent of lug-to-lug. Compare it with the flat top of your wrist. See Lug-to-lug.
- Thickness. See Watch thickness.
- Curvature: a case curved to follow the wrist wears more comfortably than a flat one of the same length.
As a rough guide, if you wear a 38 to 40 mm round watch, a rectangular watch of about 25 to 30 mm wide and 35 to 42 mm long, or a square or cushion watch of about 36 to 39 mm, will feel similar. Always check the length against your wrist.
Movements in shaped cases
Most shaped watches use round movements, with the case built around them. Some fine watches use shaped movements, such as rectangular or tonneau calibers, designed to fill the case. Shaped cases can also be harder to seal, so check the water resistance; many shaped dress watches are rated to 30 or 50 m.
How to wear a shaped watch
- Rectangular and tonneau dress watches: with suits and formal wear, on leather. See Dress watches.
- Square sports watches: with casual and smart-casual clothes.
- Cushion watches: casual and sporty, on leather, rubber or fabric.
How this applies to Vardesso
If a shaped-case Vardesso catches your eye, check both its width and its length on the product page, and compare the length with the top of your wrist. Shaped watches often wear larger than round ones, so if you're between sizes, the smaller usually looks better.
Questions and answers
What is a tonneau watch?
A watch with a barrel-shaped case, wider in the middle and narrower at the ends. "Tonneau" is French for barrel.
What is a cushion case?
A square case with softly rounded, bulging sides, like a cushion.
What was the first rectangular watch?
Cartier's square Santos of 1904 and rectangular Tank of 1917 are among the earliest and most influential shaped wristwatches.
Why was the Cartier Tank called the Tank?
Its design is said to have been inspired by the tanks of the First World War.
What is a Reverso watch?
A rectangular watch introduced by Jaeger-LeCoultre in 1931 whose case flips over to protect the crystal, originally designed for polo players.
Do square watches look bigger than round ones?
Usually yes, because their corners fill more of the wrist.
How do you measure a rectangular watch?
By its width, its length including the lugs, and its thickness. The length matters most for fit.
Are rectangular watches dress watches?
Many are, especially slim ones on leather straps, but square and cushion sports watches exist too.
Are shaped watches water-resistant?
Some are, but shaped cases can be harder to seal, and many shaped dress watches are rated to only 30 or 50 m.
What size rectangular watch should I get?
If you wear a 38 to 40 mm round watch, try a rectangular watch about 25 to 30 mm wide and 35 to 42 mm long, and check the length against your wrist.
Keep reading
- Dress watches
- Pilot watches
- Watch size guide
- Lug-to-lug
- The main watch styles explained